Inhaltszusammenfassung zur Seite Nr. 1
E
Digital Camera
User’s Guide
Thank you for purchasing this CASIO product.
• Before using it, be sure to read the precautions contained in this User’s Guide.
• Keep the User’s Guide in a safe place for future reference.
• For the most up-to-date information about this product, visit the official EXILIM
Website at http://www.exilim.com/
Inhaltszusammenfassung zur Seite Nr. 2
Unpacking As you unpack your camera, check to make sure that all items shown below are included. If anything is missing, contact your original retailer. Rechargeable lithium ion USB-AC adaptor Digital camera battery (NP-80) (AD-C53U) * The shape of the power cord plug varies according to country or geographic area. Power cord Strap USB cable CD-ROM Quick Start Guide 2
Inhaltszusammenfassung zur Seite Nr. 3
Read this first! • The contents of this manual are subject to change without notice. • The contents of this manual have been checked at each step of the production process. Feel free to contact us if you notice anything that is questionable, erroneous, etc. • Any copying of the contents of this User’s Guide, either in part or its entirety, is forbidden. Except for your own personal use, any other use of the contents of this manual without the permission of CASIO COMPUTER CO., LTD. is forbidd
Inhaltszusammenfassung zur Seite Nr. 4
Contents Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Using this Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Camera Views . . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 5
❚❙ Using the Setup Menu 62 Setting Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Setting Power Save . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Setting LCD Save . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Setting Date & Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Setting Language. . . .
Inhaltszusammenfassung zur Seite Nr. 6
Using this Menu Symbols used in this manual are explained below. NOTE • This indicates useful information when using your camera. IMPORTANT! • This indicates important message that should be read before using the function. System Requirements In order to get the most out of your camera, your computer must meet the following system requirements. For Windows: • Windows XP, Windows Vista, Windows 7 • Processor: Pentium II 450MHz or above • Memory: 512MB or above • HDD space: 200MB or above • 16bit
Inhaltszusammenfassung zur Seite Nr. 7
Camera Views Front View Flash 1 Self-timer LED/ 2 1 AF Assist Lamp Lens 3 2 Microphone 4 3 4 Back View LCD monitor 5 Zoom button 6 Menu button 7 6 FUNC/Delete button 8 7 LED indicator 9 8 OK button/4-way navigation bk 5 9 control (8, 2, 4, 6) bk Mode Switch bl r Photo mode bl Movie mode p Playback mode Top View POWER button bm Shutter button bm bn bn 7
Inhaltszusammenfassung zur Seite Nr. 8
Bottom View Battery/Memory card bo bp bq br compartment USB port bp Tripod screw hole bo bq Speaker br Left/Right View Strap ring bs bs Camera Buttons Your camera is equipped with different buttons for ease of use. Button Description POWER Press the POWER button to turn the power on/off. Shutter Press to capture an image or start/stop recording video clip. In Photo and Movie mode, press the zoom button to left to zoom Zoom out, right to zoom in. In Playback mode, press to zoom in to magnify i
Inhaltszusammenfassung zur Seite Nr. 9
Navigation Control The 4-way Navigation Control and the OK button allow you to access the various menus available from the On Screen Display (OSD). You can configure a wide range of settings to ensure maximum results from your images and videos. Further functions of these buttons are as follows. 1 2 4 5 3 No. Description Face Tracking/Rotate 1 Macro 2 Display 3 Flash 4 OK 5 Button Description 1)Confirm a selection when using the OSD menus. OK 2)In Playback Movie mode, press to start video pla
Inhaltszusammenfassung zur Seite Nr. 10
Button Description 1)In Photo mode, press to turn the face tracking function on and off. 2)Playing Video file, press to Pause/Start video playback. Up/Face Tracking/ 3)In Playback photo mode, press to rotate the image right 90 degrees by each press of the button. This feature is applicable Rotate for still images only. 4)In Menu, press to navigate through the menu and submenu selections. 1)The LCD monitor can be changed into 5 different types such as Basic, Full, None, Guideline and Help sc
Inhaltszusammenfassung zur Seite Nr. 11
Getting Started Attach the Camera Strap First, charge the battery prior to use. Note that the battery of a newly purchased camera is not charged. Perform the steps below to load the battery into the camera and charge it. • Your camera requires a special CASIO rechargeable lithium ion battery (NP-80) for power. Never try to use any other type of battery. Inserting the Battery 1. Make sure the power is off before inserting the battery. 2. Unlock and open the battery/memory card compartment at
Inhaltszusammenfassung zur Seite Nr. 12
4. Close and lock the battery/memory card compartment. Charge the Battery You can use either of the two following methods to charge the camera’s battery. • USB-AC adaptor • USB connection to a computer . To charge with the USB-AC adaptor 1. Turn off the camera. Check to make sure that the LCD monitor is blank. If it isn’t, press the POWER button to turn off the camera. 2. After connecting the USB cable supplied USB cable to (included with camera) the USB-AC adaptor, USB USB port plug the ad
Inhaltszusammenfassung zur Seite Nr. 13
3. Connect the USB cable to the camera. The LED indicator USB-AC adaptor should flash green, indicating that charging has started. The LED indicator will go out when charging is USB port complete. It takes about 150 minutes to achieve a full charge. Charging Small may take longer USB cable connector depending on charging (included with camera) conditions. Making sure that the mark on the USB cable connector is towards the lens side, connect the cable to the camera. LED indicator Op
Inhaltszusammenfassung zur Seite Nr. 14
. To charge using a USB connection to a computer The battery loaded in the camera is charged whenever the camera is connected directly to a computer with the USB cable. • Depending on the setup of your computer, you may not be able to charge the camera’s battery over a USB connection. If this happens, use of the USB-AC adaptor that comes with the camera is recommended. 1. Turn off the camera. Check to make sure that the LCD monitor is blank. If it isn’t, press the POWER button to turn off th
Inhaltszusammenfassung zur Seite Nr. 15
LED indicator Operation LED indicator Indicator Status Description Flashing green Charging Flashing green, fast Charging problem (page 78) Off Charging complete 3. After charging is complete, disconnect the USB cable from the camera and then from the computer. NOTE • Even if you turn on the camera, the battery will continue to charge if there is a USB connection with a computer. In this case, however, LED indicator operation will change as described below. LED indicator Operation Indicator St
Inhaltszusammenfassung zur Seite Nr. 16
Other Charging Precautions • With the two charging methods described above, you can charge the camera’s battery (NP-80) without removing it from the camera. Never use any other type of charger device. Attempting to use a different charger can result in unexpected accident. • A battery that is still warm due to normal use may not charge fully. Give the battery time to cool before charging it. • A battery discharges slightly even when it is not loaded in the camera. Because of this, it is rec
Inhaltszusammenfassung zur Seite Nr. 17
To remove the SD/SDHC/SDXC card 1. Unlock and open the battery/memory card compartment. 2. Gently push the card until it pops out. 3. Pull out the card carefully. NOTE • Windows XP does not support SDXC cards (exFAT format). However, with Windows XP (Service Pack 2 or 3), you can download an exFAT patch update to enable support for SDXC cards. Turning the Power On and Off Press the POWER button to turn the camera on or off. There are two ways to turn on the camera. • The startup image display
Inhaltszusammenfassung zur Seite Nr. 18
Setting the Date & Time 1. Press the 4 or 6 keys to move through the selection. 2. Press the 8 or 2 keys to change the value for the date and time. 3. Press the OK button to apply. 4. If necessary, press the Menu button to close the menu. Now, you are ready to start taking images and videos. NOTE • Holding down the 8 or 2 keys changes the values continuously. • Removing the battery from the camera too soon after configuring time and date settings for the first time can cause the settings to be
Inhaltszusammenfassung zur Seite Nr. 19
Using the LCD monitor The LCD monitor shows all important information regarding camera settings as well as the visual image of your image or video. The display on the LCD monitor is called the On Screen Display or OSD. LCD Monitor Layout . Photo Mode Screen Layout No. Item Description 1 Record mode Indicates the current mode. 2 Flash Indicates flash settings. 3 Self-timer/Burst Indicates Drive mode settings. 4 Zoom indicator Displays zoom. 5 Shots remaining Indicates the remaining shots availa
Inhaltszusammenfassung zur Seite Nr. 20
No. Item Description 20 Exposure Displays exposure settings. 21 Face tracking Indicates face tracking is enabled. 22 White balance Displays white balance settings. 23 Metering Displays metering settings. 24 Sharpness Displays sharpness settings. 25 Quality Displays quality settings. 26 Photo size Displays photo size settings. 27 AF lamp Indicates AF lamp is enabled. . Movie Mode Screen Layout Standby layout Recording layout No. Item Description 1 Record mode Indicates the current mode. 2 Zoom in
