Inhaltszusammenfassung zur Seite Nr. 1
2.0
Getting Ready
Basic Photography
Advanced Features
Photography
Advanced Features
Playback
Settings
Software Installation
Camera Connection
7
Using FinePixViewer
8
( )
BL00224-200 1
Inhaltszusammenfassung zur Seite Nr. 2
Warning To prevent fire or shock hazard, do not expose the unit to rain or moisture. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK. This symbol is intended to alert the user DO NOT REMOVE COVER (OR BACK). to the presence of important operating NO USER-SERVICEABLE PARTS INSIDE. ( ) and ma
Inhaltszusammenfassung zur Seite Nr. 3
— Consult the dealer or an experienced radio/TV CAUTION technician for help. This equipment has been tested and found to You are cautioned that any changes or comply with the limits for a Class B digital device, modifications not expressly approved in this pursuant to Part 15 of the FCC Rules. These limits manual could void the user’s authority to operate are designed to provide reasonable protection the equipment. against harmful interference in a residential Notes on the Grant: installation. T
Inhaltszusammenfassung zur Seite Nr. 4
Contents .......................................................... PLAYBACK ZOOM 30 ........................................................................ Warning 2 ............................................ ERASING SINGLE FRAME 31 ......................................................................... Preface 6 .............................. Camera Features and Accessories 7 3 Advanced Features Photography ................................ Nomenclature/Attaching the strap 8 QMODE ........
Inhaltszusammenfassung zur Seite Nr. 5
............................................... 7.3 Use at PC-CAM mode 83 PLAYBACK MENU ........................................ 7.4 Disconnecting the Camera 86 ... • p ERASING SINGLE ALL FRAMES/FORMATTING 50 ....................... kPROTECTING IMAGES FRAME/ALL 54 8 Using FinePixViewer ......... i HOW TO SPECIFY PRINT OPTIONS (DPOF) 58 ............................ 8.1 Saving Images on Your Computer 88 ................................................... i DPOF SET FRAME 59 .......................
Inhaltszusammenfassung zur Seite Nr. 6
Preface ■ Test Shots Prior to Photography ■ Notes on Electrical Interference For particularly important photographs (such as weddings and If the camera is to be used in hospitals or aircrafts, please overseas trips), always take a test photograph and view the note that this camera may cause interference to other image to make sure that the camera is functioning normally. equipment in the hospital or aircraft. For details, please h Fuji Photo Film Co., Ltd. cannot accept liability for any check w
Inhaltszusammenfassung zur Seite Nr. 7
Camera Features and Accessories Camera Features Accessories h 2.0 million effective pixels h16 MB, xD-Picture Card (1) h High-resolution Fujinon lens. Supplied with: Anti-static case (1) h Maximum recording pixels of 1600 × 1200 pixels (1.92 million pixels) h Compact and lightweight body hWide range of photography applications (includes Macro function) hAutomatic scene recognition, auto white balance and AE functions built in hLR6 AA-size alkaline Batteries (2) hAutomatic high-precision flash bu
Inhaltszusammenfassung zur Seite Nr. 8
✽ Refer to the pages in parentheses for information on using the camera features. Nomenclature Mode switch Still photography mode(P.21) Playback mode(P.28) Movie mode(P.44) POWER switch(P.14) Flash(P.37) Shutter button Viewfinder window Lens/Lens cover Flash control sensor (Special USB) Self-timer lamp socket(P.80, 83) (P.41) DC IN 3V Macro selector switch(P.27) (Power input) socket(P.79) 8
Inhaltszusammenfassung zur Seite Nr. 9
Viewfinder lamp(P.23) Viewfinder(P.22) button DISP button LCD monitor(P.22) (P.19, 25, 29) MENU/OK button (P.19) BACK button(P.19) Strap mount Tripod mount xD-Picture Card slot(P.13) Battery cover(P.12) Attaching the strap 1 2 Battery compartment 9
Inhaltszusammenfassung zur Seite Nr. 10
Nomenclature (Sample display) Example of LCD Monitor Text Display: Still photography mode Macro EV Flash White balance Photography mode Number of remaining shots Quality mode Battery low warning Camera shake warning Zoom bar Date Example of LCD Monitor Text Display: Playback mode Playback mode Playback frame number Protection Battery low warning DPOF Date 10
Inhaltszusammenfassung zur Seite Nr. 11
1 Getting Ready LOADING THE BATTERIES AND xD-Picture Card ( ) Compatible batteries xD-Picture Card sold separately Use two AA-size alkaline batteries or two AA- DPC-16 (16MB) DPC-32 (32MB) size nickel-metal hydride (Ni-MH) batteries. DPC-64 (64MB) DPC-128 (128MB) ◆ Notes on Handling Batteries ◆ h It is recommended that you use the same brand of 1 alkaline batteries as those supplied with the camera. h Never use a battery when the Outer casing outer casing is split or peeling as this could result
Inhaltszusammenfassung zur Seite Nr. 12
LOADING THE BATTERIES AND xD-Picture Card 1 2 Slide the battery cover out and lift it open. Insert the batteries correctly as indicated by the polarity icons. When you want to replace the battery ◆ ◆ Check that the camera is switched off, open the battery cover and then remove the battery. ! Do not apply excessive force to the battery cover. ● ● ! You should carry a spare set of batteries (sold separately) when taking pictures. Do not open the battery cover while the camera is still switched on
Inhaltszusammenfassung zur Seite Nr. 13
◆ Replacing an xD-Picture Card ◆ 3 1 0 2 0 When you push the xD-Picture Card into the slot and then slowly remove your finger, the lock is released and the xD-Picture Card is pushed out. You can then pull the xD-Picture Card the rest of the way out. 1 1Push the xD-Picture Card firmly into the xD-Picture Card slot as far as it will go. 2Close the battery cover. ! Take care not to remove your finger too quickly ● after the lock is released, as the card may spring completely out of the slot. ! If
Inhaltszusammenfassung zur Seite Nr. 14
SWITCHING ON AND OFF 1 2 To switch the camera on and off, slide the power When you first switch the camera on, the date is switch sideways. When you switch the camera cleared. Press the “MENU/OK” button to set the on, the viewfinder lamp lights (green). date and time. ! To set the date and time later, press the “BACK” ● button. ! Take care not to touch the lens when you switch the ● ! If you do not set the date and time, this confirmation camera on as the lens cover opens when
Inhaltszusammenfassung zur Seite Nr. 15
SETTING THE DATE AND TIME 3 4 1 1 0 0 2 Once you have set the date and time, press the 1Use “d” or “c” to select Year, Month, Day, “MENU/OK” button. Pressing the “MENU/OK” Hour or Minute. You can select your preferred button switches the camera to Photography or date format. Playback mode. 2Press “a” or “b” to set the number. ! To set the time precisely, press the “MENU/OK” ● button when the time is at zero seconds. ! If the camera is left for 30 minutes or long
Inhaltszusammenfassung zur Seite Nr. 16
SETTING THE DATE AND TIME Changing the date and time To change the date display format You can select your preferred date format. 1 03 0 0 20 4 1 0 2 0 To change the date and time: 1Press the “MENU/OK” button. 1Press “d” or “c” to select the date format. 2Use “d” or “c” to select “g” OPTION and 2Press “a” or “b” to set the format. Refer to then use “a” or “b” to select “SET–UP”. the table below for details of the settings. 3Press the “MENU/OK” button.
Inhaltszusammenfassung zur Seite Nr. 17
◆ Checking the remaining battery charge ◆ Switch the camera on and check that no battery Setting Explanation level warning (Z or X) is displayed on the LCD monitor. If no icon is displayed, there is Displays the date in the “year.month. YYYY.MM.DD ample charge left in the battery. day” format. iZ Lit red: Displays the date in the “month/day/ 1 MM/DD/YYYY Battery charge low. Replace or recharge the year” format. battery as it will run out shortly. Displays the date in the “day.month. iX Blinking
Inhaltszusammenfassung zur Seite Nr. 18
SELECTING THE LANGUAGE 1 2 0 10 3 0 1 0 2 2 0 1Press the “MENU/OK” button to display the 1The “SET–UP” screen appears. Use “a” or menu screen. “b” to select “LANGUAGE”. 2Use “fg” to select “SET–UP” from the 2Use “c” to select “ENGLISH”, “FRANCAIS” or “g” OPTION menu. “DEUTSCH”. You can cycle through the 3Press the “MENU/OK” button. language settings by pressing “c”. ! The screens in this manual are shown in English. ● ! See P.64 for more information on the “g
Inhaltszusammenfassung zur Seite Nr. 19
Basic 2 Photography BASIC OPERATION GUIDE You’ve read the chapter on getting ready and the camera is now set up and ready to take pictures. The Basic Photography section explains the three basic steps of “taking pictures”, “viewing pictures” and “erasing pictures”. Master the basic steps by actually trying them out on the camera as you go. ●POWER switch ●Switching between still photography, Slide this switch to turn the camera on and off. playback and movies 2 ●Main actions performed by a, b,
Inhaltszusammenfassung zur Seite Nr. 20
BASIC OPERATION GUIDE ●Using the Menus 1Display the menu. Press the “MENU/OK” button. 2Select a menu option. 3Select a setting. Press the “d” or “c”. Press the “a” or “b”. Displaying the On-screen Help Help messages are displayed at the bottom of 4Confirm your selection. the screen to show you the next step to take. Press the “MENU/OK” button. Press the button indicated. In the Owner’s Manual, black triangles are used to indicate up, down, left Pre
