Inhaltszusammenfassung zur Seite Nr. 1
Digital Camera
GC-A70
INSTRUCTIONS Thank you for purchasing this JVC product. Before beginning to operate this
unit, please read the instruction manual carefully in order to make sure that the
best possible performance is obtained. If you have any question, consult your
JVC dealer.
To HomePage of JVC
LNT0011-001A
Inhaltszusammenfassung zur Seite Nr. 2
[Back] [Next] “ SOME DO’S AND DON’TS ON THE SAFE USE OF EQUIPMENT ” This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured. Do read the operating instructions before you attempt to use the equipment. Do ensure that all electrical connections (including the mains plug, extension leads and inter-connections between pieces of equipment) a
Inhaltszusammenfassung zur Seite Nr. 3
[Back] [Next] FCC INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable pr
Inhaltszusammenfassung zur Seite Nr. 4
[Back] [Next] WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. SAFETY PRECAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert
Inhaltszusammenfassung zur Seite Nr. 5
...remove the batteries while the power is on. ...look through the viewfinder directly at the sun or extremely bright light. ...point the lens directly into the sun. This can lead to malfunctioning of the internal circuitry. There is also a risk of fire or electric shock. ...subject it to shock or excessive vibration. ...connect any USB cable to this unit except the one provided. 2. Avoid using the unit in the following places: Where the camera will be subject to dust, soot, steam, or ex
Inhaltszusammenfassung zur Seite Nr. 6
3. When discarding batteries, environmental problems must be considered and the local rules or laws governing the disposal of these batteries must be followed strictly. HOW TO HANDLE A CD-ROM Take care not to soil or scratch the mirror surface (opposite to the printed surface). Do not write anything or put a sticker on either the front or back surface. If the CD-ROM gets dirty, gently wipe it with a soft cloth outward from the center hole using a circular motion. Do not use conventiona
Inhaltszusammenfassung zur Seite Nr. 7
[Back] [Next] FUN THINGS YOU CAN DO This camera is an all-in-one compact size digital and USB PC-camera. With it, you can: Take digital pictures/video clips in an instant. Easily capture digital images and download them to your computer. Videoconference on the Internet. Keep in touch with distant family and friends. See and talk with people on the Internet face-to-face. Send captured images with your e-mail messages.
Inhaltszusammenfassung zur Seite Nr. 8
[Back] [Next] WHAT'S INCLUDED? Please check to see that the following items are included in the package. If any item is missing, please enquire at your nearest JVC-authorized dealer. Notes: Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Other trademarks are the properties of their respective owners.
Inhaltszusammenfassung zur Seite Nr. 9
[Back] [Next] SYSTEM REQUIREMENTS (PC) Microsoft® Windows® 98/98SE/Me/2000/XP (Pre-installed Model) Intel® Pentium® Processor 166 MHz or higher Free USB Port Minimum RAM: 32 MB (Windows XP: 128 MB) 250 MB of available hard disk space Color display: 800x600 or better CD-ROM drive Notes: Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Other trademarks are the properties of their respecti
Inhaltszusammenfassung zur Seite Nr. 10
[Back] [Next] FEATURES LCD Monitor A 1.5-inch color TFT LCD monitor with high image quality of 2 megapixels that enables monitoring of images while shooting, and immediately after recording. Design Features a compact, posh metallic design. Digital Zoom Digital zooming of x2, x3 and x4 and macro mode (switching by lens) with a 45 cm close-up capability for wide variety of shooting scenes. Multipurpose A Digital Still Camera, usable as a movie camera (Video Clip: AVI w/o Sound) or Webca
Inhaltszusammenfassung zur Seite Nr. 11
[Back] [Next] GETTING TO KNOW THE CAMERA Controls, Connectors and Indicators Built-in Flash Viewfinder window Self-Timer lamp Lens Normal / Macro switch dial USB port Strap holder USB Port Cover Shutter button [RESOLUTION] & Quality / Left button Status indicator [DISPLAY] /Up button [OK/ ZOOM] button Viewfinder Flash mode /Right button [POWER] button Self-Timer /Down button [MODE] button [MENU] button LCD monitor Battery/Memory Card compartment door Tripod socket
Inhaltszusammenfassung zur Seite Nr. 12
[Back] [Next] GETTING STARTED Be sure to insert the (AA-size Alkaline) batteries before trying to capture images with your camera. Inserting the Batteries 1. Slide the Battery/Memory card compartment door (located on the right side of the camera) in the direction indicated by the arrow to open it. 2. Insert the AA-size batteries as indicated on the inner side of the door. 3. Close back the door and turn on the camera. Checking Batteries( : Full battery power) The Battery Indicator
Inhaltszusammenfassung zur Seite Nr. 13
1. Thread the thinner looped end of the strap through the strap holder. 2. Insert the other end of the strap through the thin loop and pull it all the way out. Ensure that the strap is securely tightened unto the camera. Note: Be careful not to bump the camera or entangle the strap. Inserting and Removing the SD / Multimedia Card This camera can be used with either an SD card or a Multimedia card (MMC). When traveling and capturing a lot of images, it is convenient to make use of an
Inhaltszusammenfassung zur Seite Nr. 14
Switching the LCD Monitor ON / OFF The LCD monitor is automatically activated when the power is switched on. However, since the LCD monitor consumes battery power fast, we recommend that you turn off the LCD monitor and use the optical viewfinder as far as possible when capturing still images. To switch the LCD monitor ON or OFF, toggle the [DISPLAY]/Up button. When the LCD Monitor is OFF, the status indicator lights up to indicate Power ON status. Notes: The “DATE/TIME” setting sc
Inhaltszusammenfassung zur Seite Nr. 15
[Back] [Next] OPERATIONS CAMERA MODE PLAY /ERASE MODE VIDEO CLIP MODE Shooting Basics Shooting Basics Play Basics Customized Shooting Zooming Using Flash Customized Shooting is not applicable to the Video Clip and Play/Erase Mode. Using Self-Timer Setting the Image Resolution & Quality Menu Settings “SETUP MENU” “SETUP MENU” “SETUP MENU” “QUICK VIEW” “EV&WHITE BALANCE” “SLIDE SHOW” “EV&WHITE BALANCE” “ERASE” “COPY TO CARD” “DPOF” Setting the var
Inhaltszusammenfassung zur Seite Nr. 16
[Back] [Next] CAMERA MODE This mode is used for capturing still images. The images captured will be stored in the camera’s internal memory or the memory- card in JPEG file format. LCD monitor status display Memory Card Indicator Camera mode Indicator r Resolution & Quality Indicato Number indicator Built-in Flash Indicator Indicator Self-Timer indicator Zoom Indicator EV Level Indicator White Balance Indicator Battery Indicator Macro Indicator 1. Resolution & Quality Indica
Inhaltszusammenfassung zur Seite Nr. 17
5. Self-Timer Indicator 2 sec Self-Timer mode. Shooting begins 2 seconds after pressing the shutter button. 10 sec Self-Timer mode.Shooting begins 10 seconds after pressing the shutter button. No Indicate Will not be displayed when Self-Timer is not being set. 6. Zoom Indicator Appears when Digital Zoom is set to 2 times. Appears when Digital Zoom is set to 3 times. Appears when Digital Zoom is set to 4 times. No Indicate Will not be displayed when Digital Zoom is not being set.
Inhaltszusammenfassung zur Seite Nr. 18
1. Get the camera ready. (Refer to “Getting Started”) 2. Toggle the [MODE] button to select the Camera mode [ ]. 3. Turn the Normal / Macro switch dial to Normal . 4. Frame your subject. You may use either the viewfinder or the 1.5" full color TFT LCD monitor (Toggle the [DISPLAY]/ Up button to activate or deactivate it) * We recommend, however, that the viewfinder be used as far as possible to extend battery time since the LCD is highly power consumptive. 5. Press the shutter button fu
Inhaltszusammenfassung zur Seite Nr. 19
[Back] [Next] Customized Shooting (CAMERA MODE) (1) Zooming This mode allows you to zoom up on your subject, making it appear larger (2x, 3x, 4x) and closer. Procedures: 1. Ensure that the camera is turned on. 2. Select the Camera mode with the [MODE] button. 3. Press the [OK/ZOOM] button to activate the digital zoom function. The image on the LCD monitor will be enlarged. With each press, the image will change in the sequence of 2x, 3x, 4x and zoom off. 4. Frame your subject. The
Inhaltszusammenfassung zur Seite Nr. 20
Auto Flash The flash fires automatically according to the photography conditions. It is suitable for general photography. Red-Eye Use this mode to avoid the red-eye effect when photographing people or animals in low light Reduction (RER) conditions. Used where the use of flash is prohibited or when utilizing the night view/indoor lighting for shooting. Flash Off The flash mode can also be turned off when the distance to the subject is too far away for the flash to have any effect. Note
