Bedienungsanleitung JVC V.NETWORKS VN-C10

Bedienungsanleitung für das Gerät JVC V.NETWORKS VN-C10

Gerät: JVC V.NETWORKS VN-C10
Kategorie: Digitalkamera
Produzent: JVC
Größe: 3.74 MB
Datum des Hinzufügens: 4/11/2013
Seitenanzahl: 78
Anleitung drucken

Herunterladen

Wie kann man es nutzen?

Unser Ziel ist Ihnen einen schnellen Zugang zu Inhalten in Bedienungsanleitungen zum Gerät JVC V.NETWORKS VN-C10 zu garantieren. Wenn Sie eine Online-Ansicht nutzten, können Sie den Inhaltsverzeichnis schnell durchschauen und direkt zu der Seite gelangen, auf der Sie die Lösung zu Ihrem Problem mit JVC V.NETWORKS VN-C10 finden.

Für Ihre Bequemlichkeit

Wenn das direkte Durchschauen der Anleitung JVC V.NETWORKS VN-C10 auf unserer Seite für Sie unbequem ist, können sie die folgende zwei Möglichkeiten nutzen:

  • Vollbildsuche – Um bequem die Anleitung durchzusuchen (ohne sie auf den Computer herunterzuladen) können Sie den Vollbildsuchmodus nutzen. Um das Durchschauen der Anleitung JVC V.NETWORKS VN-C10 im Vollbildmodus zu starten, nutzen Sie die Schaltfläche Vollbild
  • Auf Computer herunterladen – Sie können die Anleitung JVC V.NETWORKS VN-C10 auch auf Ihren Computer herunterladen und sie in Ihren Sammlungen aufbewahren. Wenn Sie jedoch keinen Platz auf Ihrem Gerät verschwenden möchten, können Sie sie immer auf ManualsBase herunterladen.
JVC V.NETWORKS VN-C10 Handbuch - Online PDF
Advertisement
« Page 1 of 78 »
Advertisement
Druckversion

Viele Personen lesen lieber Dokumente nicht am Bildschirm, sondern in gedruckter Version. Eine Druckoption der Anleitung wurde ebenfalls durchdacht, und Sie können Sie nutzen, indem Sie den Link klicken, der sich oben befindet - Anleitung drucken. Sie müssen nicht die ganze JVC V.NETWORKS VN-C10 Anleitung drucken, sondern nur die Seiten, die Sie brauchen. Schätzen Sie das Papier.

Zusammenfassungen

Unten finden Sie Trailer des Inhalts, der sich auf den nächsten Anleitungsseiten zu JVC V.NETWORKS VN-C10 befindet. Wenn Sie den Seiteninhalt der nächsten Seiten schnell durchschauen möchten, können Sie sie nutzen.

Inhaltszusammenfassungen
Inhaltszusammenfassung zur Seite Nr. 1

V.NETWORKS
Model INSTRUCTIONS
VN-C10
For Customer Use:
Enter below the Serial No. which is
located on the body. Retain this
information for future reference.
Model No. VN-C10
Serial No.
LWT0095-001A
VN-C10_E_01-43.pm65e 1 08/01/03, 9:12 AM

Inhaltszusammenfassung zur Seite Nr. 2

IMPORTANT SAFEGUARDS 1. Read all of these instructions. 2. Save these instructions for later use. 3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 5. Do not use attachments not recommended by the appliance manufacturer as they may cause hazards. 6. Do not use this appliance near water - for example, near a batht

Inhaltszusammenfassung zur Seite Nr. 3

Safety Precautions Due to design modifications, data given in this FOR USA AND CANADA instruction book are subject to possible change without prior notice. CAUTION RISK OF ELECTRIC SHOCK WARNING: DO NOT OPEN TO REDUCE THE RISK OF FIRE OR CAUTION:TO REDUCE THE RISK OF ELECTRIC ELECTRIC SHOCK, DO NOT SHOCK. DO NOT REMOVE COVER (OR EXPOSE THIS APPLIANCE TO RAIN BACK). NO USER-SERVICEABLE PARTS INSIDE.REFER SERVICING TO OR MOISTURE. QUALIFIED SERVICE PERSONNEL. AVERTISSEMENT: The lightning flash wis

Inhaltszusammenfassung zur Seite Nr. 4

Thank you for purchasing this product. (These instructions are for VN-C10U.) Before beginning to operate this unit, please read the instruction manual carefully in order to make sure that the best possible performance is obtained. Contents Contents ................................................................................................. 4 Introduction Features ................................................................................................. 6 Items Included ..............

Inhaltszusammenfassung zur Seite Nr. 5

Step 4 Setting with V.Networks Controller Operations 4-1 Starting Up V.Networks Controller ............................................. 44 (V.Networks 4-2 Function Settings with V.Networks Controller ............................ 45 4-3 Motion Detection Standby ......................................................... 46 Controller) 4-4 Image Size and Inversion .......................................................... 47 4-5 Setting the Image Quality ............................................

Inhaltszusammenfassung zur Seite Nr. 6

Introduction Features • VN-C10 uses a 1/3-inch CCD with 380,000 pixels, enabling monitoring of high quality images. •For the compression method, in addition to the standard JPEG, VN-C10 supports MPEG4 for a wide range of bit rates. • Equipped with an image recording function by motion detection and alarm input. • VN-C10 has a design similar to other CCTV monitoring cameras, allowing peripheral equipment for such cameras to be also used for VN-C10. • With a built-in Web server, VN-C10 supports In

Inhaltszusammenfassung zur Seite Nr. 7

Required Operating Environment PC Specifications OS : Windows 2000 (Service Pack 1 or higher) Windows XP Home Edition Windows XP Professional CPU : Pentium III 500 MHz or higher (1 GHz or higher recommended) Memory Capacity : 128 MB or more Hard Disk Space : 20 MB or more Display/Video Card : 1024 X 768 pixels or more, True Color (24 bits or 32 bits) LAN Specifications • 10 BASE-T/100 BASE-TX network connected with IEEE802.3 hubs. Note The PC specifications above are only for a reference purpose

Inhaltszusammenfassung zur Seite Nr. 8

Introduction Operating Precautions ● VN-C10 is designed for indoor use. For outdoor use, prepare a proper housing to cover and protect the camera. ● The product should not be installed or used in the following locations. • Locations subject to rain or water. • Locations with hot air or oil vapors such as in kitchens, etc. • Locations where the allowed ambient temperature (0 °C to 40 °C) is exceeded. • Locations exposed to X-ray radiation or where strong electrical or magnetic waves are gener- at

Inhaltszusammenfassung zur Seite Nr. 9

Controls, Connectors and Indicators (Front, top and side views) 2 1 3 4 5 8 7 6 1 Lens mount 5 Screw hole (1/4-20UNC) The mount for attaching a lens. Either a C- For attaching the camera to mount or a CS-mount lens can be used. a fixer or a pan/tilt unit. The screw length must not ex- ceed 7 mm. If a longer screw 2 Back-focus adjustment ring MAX. 7 mm is used, the internal parts of The ring for adjusting back-focus and chang- the camera may be dam- ing the mount method. For adjusting back-fo- a

Inhaltszusammenfassung zur Seite Nr. 10

Introduction Controls, Connectors and Indicators (continued) (Side and rear views) 9 # $ % 0! 1 2 G OUT COM 2 1 ALARM PUSH RESET IRIS @ POWER 10BASE-T/100BASE-TX DO NOT CONNECT TO THE TELEPHONE NETWORK For USA ^ 9 Ventilation opening # [DC 12 V/AC 24 V] Power terminal For the internal cooling fan. Install the cam- For connecting to a DC 12 V or AC 24 V, 50 Hz/ era in a way that does not cover the opening. 60 Hz, power source. (☞ Page 14) 0 [RESET] button $ [ALARM INPUT] terminals Press this but

Inhaltszusammenfassung zur Seite Nr. 11

Preparations Connection Examples LAN Connection VN-C10 MAC address BF LOCK LAN VN-C10 MAC address PC BF LOCK Network Connection VN-C10 MAC address BF LOCK VN-C10 MAC address BF LOCK LAN INTERNET FTP Server PC Images are automatically PC updated at a regular interval. Peer-to-Peer Connection VN-C10 MAC address BF LOCK PC 11 VN-C10_E_01-43.pm65e 11 08/01/03, 9:13 AM Av Pk L H Av Pk L H Av Pk L H ALC LEVEL ALC LEVEL ALC LEVEL Av Pk L H Av Pk L H ALC

Inhaltszusammenfassung zur Seite Nr. 12

Preparations Preparation Procedure Set the camera in the following procedure. Step 1 Connection and Installation Attach a lens and connect the power cable, a LAN cable and an alarm etc. ☞ Page 13 Then, install the camera to a fixer, etc. Fix a wire securely for preventing the camera from falling off. Step 2 Setting the Network Install the software [V.Networks Controller], and set the network for the PC ☞ Page 19 and VN-C10. Also perform the setting with [V.Networks Setup Tool] and regis- tratio

Inhaltszusammenfassung zur Seite Nr. 13

Preparations (Step 1 Connection and Installation) 1-1 Attaching a Lens Attach a lens in the following procedure. 1. Before attaching a lens, check the mount method of the lens. VN-C10 is set for CS-mount at the factory. For attaching a C-mount lens, loosen the back- focus locking screw using a screwdriver and turn the back-focus adjustment ring to change the mount method accordingly with a finger or a pointed tool like a screwdriver. To attach a lens, observe the length shown as (a). Do not use

Inhaltszusammenfassung zur Seite Nr. 14

Preparations (Step 1 Connection and Installation) 1-2 Connecting the Power Cord Connect the camera to DC 12 V or AC 24 V. The power indicator is lit when the power is turned on. To Power Power Cord • Do not connect the power cord to DC 12 V and AC 24 V at the same time. • Use a lug plate to securely connect the power cord to the power terminals and avoid 1 2 G 2 1 OUT COM misconnection or loose connection. •For DC 12 V connection, ensure that the polarities, positive and negative, are correctly

Inhaltszusammenfassung zur Seite Nr. 15

1-3 Connecting a LAN Cable Connect the camera to a hub or a PC by using a LAN cable. • For hub connection Use a straight cable. 1 2 G OUT COM 2 1 • For PC connection Use a cross-over cable. ALARM PUSH Caution POWER 10BASE-T/100BASE-TX There are a few types of LAN board for DO NOT CONNECT TO THE TELEPHONE NETWORK which a cross-over cable cannot be used. For USA Check the specifications of the LAN board to be used before performing connection. Note For 100 BASE-TX, use a CAT-5 cable. 15 VN-C10_E_0

Inhaltszusammenfassung zur Seite Nr. 16

Preparations (Step 1 Connection and Installation) 1-4 Connecting the Alarm I/O Terminals Connect the alarm I/O terminals with external equipment such as a sensor, buzzer, etc. Press the buttons for connecting or disconnect- 1 2 G 2 1 OUT COM ing cables as shown on the left. Cable Specifications ALARM 50 m max. PUSH UL1007, UL1015 or equivalent AWG #22 to AWG #18 or equivalent POWER 10BASE-T/100BASE-TX DO NOT CONNECT TO THE TELEPHONE NETWORK For USA Caution Due to external noise, the camera may n

Inhaltszusammenfassung zur Seite Nr. 17

1-4 Connecting the Alarm I/O Terminals (continued) Alarm Output Terminal This terminal is for connecting with an alarm annunciator such as an indicator, a lamp or a buzzer. Annunciator Output Requirements Connection • Equivalent to NPN open collector output VN-C10 Example 1 (The output logic is set with [V.Networks Setup DC 12 V Output Tool.]) R terminal IN • Allowed applied voltage: DC 12 V max. MAX MAX 300 mA 12 V • Allowed input current: 300 mA COM COM • Momentary output: 2 to 5000 ms termi

Inhaltszusammenfassung zur Seite Nr. 18

Preparations (Step 1 Connection and Installation) 1-5 Installing the Camera Fall-Preventive wire For attaching the camera to a fixer or a rotating platform, use the screw hole of the mounting bracket. Camera mounting screw hole Camera-mounting bracket Caution ● The length of the screw for mounting the camera must not exceed 7 mm. Do not MAX. use a longer screw as it 7 mm may damage the internal parts of the camera. ● In the factory setting, the bracket is attached on the top of the camera. For

Inhaltszusammenfassung zur Seite Nr. 19

Preparations (Step 2 Setting the Network) 2-1 Installing the Software For operating VN-C10, install the software from the CD-ROM, which is supplied with ~~~~~~~~~~~~~~~ the camera in the following procedure. Installing V.Networks Controller 1. Select [Setup.exe] found in the [JVC] folder. 2. Proceed by following the instructions shown on the screen. 3. If the installation is successfully executed, the [V.Networks] icon is created in [Programs] of the Windows [Start] menu. [vn-c10u Controller] i

Inhaltszusammenfassung zur Seite Nr. 20

Preparations (Step 2 Setting the Network) 2-2 Setting the PC’s IP Address for Windows XP After attaching the camera, proceed to set the IP address of the PC by which the camera is operated. With Windows XP, follow the procedure below to set the IP address. (For Windows 2000, ☞ Page 22) Note Under a DHCP environment and also if the IP address to be allotted to [V.Networks] is already known, skip 2-2 [Setting the PC’s IP Address]. 1.Click . • Right-click [My Network] and select [Properties]. 2.Sel


Ähnliche Anleitungen
# Bedienungsanleitung Kategorie Herunterladen
1 JVC Digital Video Camera GR-D24 Handbuch Digitalkamera 65
2 JVC 1SM321404 Handbuch Digitalkamera 5
3 JVC Digital Video Camera GR-DVL105 Handbuch Digitalkamera 19
4 JVC Digital Video Camera GR-DX78 Handbuch Digitalkamera 6
5 JVC DOME CAMERA VN-C215V4U Handbuch Digitalkamera 6
6 JVC DULYT1266-004A Handbuch Digitalkamera 1
7 JVC DOME TYPE CAMERA TK-C676 Handbuch Digitalkamera 15
8 JVC DVL522U Handbuch Digitalkamera 0
9 JVC CYBERCAM GR-DVF31 Handbuch Digitalkamera 4
10 JVC CompactFlash LYT0143-001A Handbuch Digitalkamera 0
11 JVC DVL320U Handbuch Digitalkamera 6
12 JVC DVL367 Handbuch Digitalkamera 4
13 JVC DVL520U Handbuch Digitalkamera 30
14 JVC DVL720U Handbuch Digitalkamera 10
15 JVC EVERIO GZ-HM550 Handbuch Digitalkamera 85
16 Sony 3D Bloggie MHS-FS3 Handbuch Digitalkamera 35
17 Sony 838 MHz to 862 MHz Handbuch Digitalkamera 7
18 Sony 4-133-499-11 (1) Handbuch Digitalkamera 15
19 Sony 4-187-045-11(1) Handbuch Digitalkamera 1
20 Sony 4-132-058-11(1) Handbuch Digitalkamera 5