Inhaltszusammenfassung zur Seite Nr. 1
ENGLISH
User's Manual
Thank you for buying a Samsung Camera.
This manual will guide you through using the camera, including capturing images, downloading images and
using the application software. Please read this manual carefully before using your new camera.
Inhaltszusammenfassung zur Seite Nr. 2
Instructions Use this camera in the following order Before connecting the camera to a PC, via the Set up the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in camera driver Application software CD-ROM. (p.107) Take a picture (p.23) Take a picture * When taking a picture, you should use the rechargeable battery supplied with the camera. Insert the supplied USB cable into the PC’s USB Insert the port and the camera’s USB connection terminal. (p
Inhaltszusammenfassung zur Seite Nr. 3
Contents Things to Watch Out for When Taking READY Pictures 26 Getting to know your camera 5 Using the camera buttons to adjust the About the icons 5 camera 27 Danger 6 POWER button 27 Warning 6 SHUTTER button 27 Caution 7 ZOOM W/T button 27 System chart 8 Voice memo/ UP button 29 Identification of features 10 Macro / Down button 30 Front & Top 10 Focus lock 31 Back & Bottom 10 Flash/ Left button 32 Side/ 5-function button 11 Self-timer/ Remote/ Right button 35 Cradle 11 MENU/ OK button 37 Movie
Inhaltszusammenfassung zur Seite Nr. 4
Contents Movie clip capture function 56 Setting up the Date/ Time/ Date type 87 On camera movie trimming 57 Imprinting the recording date 87 Playing back a recorded voice 58 Sound 88 LCD monitor indicator 59 Connecting an External Device (USB) 88 Using the camera buttons to adjust the Function lamp 89 camera 60 Auto Focus lamp 90 Thumbnail / Enlargement button 60 LCD brightness 90 Voice memo / Up button 61 Selecting Video out type 91 Play & Pause/ Down button 62 Quick view 93 Left/ Right/ Menu/
Inhaltszusammenfassung zur Seite Nr. 5
Getting to know your camera Thank you for buying a Samsung Digital Camera. Prior to using this camera, please read the user manual thoroughly. When you require After Sales service, please bring the camera and the cause of the camera malfunction (such as Batteries, Memory card etc.) to the A/S centre. Please check that the camera is operating properly prior to when you intend to use it (e.g. for a trip or an important event) to avoid disappointment. Samsung camera takes no responsibility for any
Inhaltszusammenfassung zur Seite Nr. 6
Danger Do not attempt to modify this camera in any way. This may result in fire, injury, electric shock or severe damage to you or your camera. Internal inspection, maintenance and repairs should be carried out by your dealer or Samsung Camera Service centre. Please do not use this product in close proximity to flammable or explosive gases, as this could increase the risk of explosion. Should any form of liquid or a foreign object enter the camera, do not use it. Switch off the camera, and then
Inhaltszusammenfassung zur Seite Nr. 7
Caution Leaking, overheating, or burst batteries could result in fire or injury. Use batteries with the correct specification for the camera. Do not short circuit, heat or dispose of batteries in fire. Do not insert the batteries with the reverse polarities. Remove the batteries when not planning to use the camera for a long period of time. Batteries may leak corrosive electrolyte and permanently damage the camera's components. Do not fire the flash while it is in contact with hands or objects
Inhaltszusammenfassung zur Seite Nr. 8
System chart Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. < Included items > Pouch User manual, Remote control Camera strap Software CD Product warranty (see p.105, 106) DPOF compatible SD memory card printer (see p.75) (see p.18) Rechargeable battery (SLB-1137) AC cord SAC-41 Cradle (for both Charger and AC adapter) 8
Inhaltszusammenfassung zur Seite Nr. 9
System chart System Requirements For Windows PC with processor better than MMX Pentium 233MHz (XP : Pentium II 300MHz) Windows 98/98SE/2000/ME/XP Minimum 32MB RAM (XP : 128MB) 140MB of available hard-disk space PictBridge compatible Computer USB port printer(see p.78) CD-ROM drive 800x600 pixels, 16-bit colour display compatible monitor (24-bit colour display recommended) For Macintosh Power Mac G3 or later Mac OS 9.2 ~ 10.3 Minimum 64MB RAM 110MB of available hard-disk space USB cable USB cab
Inhaltszusammenfassung zur Seite Nr. 10
Identification of features Front & Top Mode switch Power button Shutter button Speaker Flash Auto Focus lamp Remote Microphone control sensor Function lamp & Self-timer lamp Lens Back & Bottom M button LCD button (Album button) Zoom T button (Digital zoom) Zoom W button (Thumbnail) LCD monitor Strap eyelet Tripod socket +/-, DELETE DC/USB/AV button connection terminal/ Play mode button Cradle connector The play mode button is lower than other camera buttons to prevent the camera from unwante
Inhaltszusammenfassung zur Seite Nr. 11
Identification of features Side/ 5-function button Battery chamber cover Voice memo/ UP button MENU/ OK button FLASH/ SELF-TIMER/ Battery chamber LEFT button REMOTE/ RIGHT button Memory card slot Macro / DOWN button Battery holder Play & Pause button Cradle You can recharge your rechargeable battery, print a captured image and download images with the cradle. (Refer to page 15, 78, 117) Top Camera connection terminal Back DC input USB port connection point AV connection terminal 11
Inhaltszusammenfassung zur Seite Nr. 12
Identification of features You can select the desired working mode by using the mode switch located on the top of the camera. This digital camera has 3 recording modes. These are listed below. Movie clip mode A movie clip can be recorded for as long as the available recording time of the memory capacity allows. Image size and type are listed below. - Image size : 640X480, 320X240, 160X128 (user selectable) - Movie clip file type : *. avi(MPEG-4) Voice recording mode A voice recording can be re
Inhaltszusammenfassung zur Seite Nr. 13
Identification of features Function lamp & Self-timer lamp Function Description Power on The lamp blinks and turns off when the camera is ready to take a picture The lamp blinks while saving the image data and turns off when the After taking a picture camera is ready to take a picture While movie recording The lamp blinks at a 2-second interval While voice recording The lamp blinks at a 2-second interval When the USB cable The lamp lights up is inserted Transmitting Data The lamp blinks For the
Inhaltszusammenfassung zur Seite Nr. 14
Connecting to a Power Source You should use the rechargeable battery (SLB-1137) supplied with the camera. Do not use the AC adapter and non rechargeable battery at the same time. It may cause an explosion. INFORMATION Important information about battery usage When the camera is not used, turn off the camera power. Do not use the non rechargeable batteries. It may cause an explosion. Please remove the batteries if the camera will not be used for long periods. Batteries can lose power over time an
Inhaltszusammenfassung zur Seite Nr. 15
Connecting to a Power Source DANGER Always turn off the power before taking the SAC-41 (for both Charger and AC adapter) out of the mains supply. As with all mains powered devices, safety is important. Ensure that neither the camera nor adapter comes into contact with water or metallic materials. Please ensure that you use the SAC-41 (for both Charger and AC adapter) with the correct specification for the camera. Failure to do so may affect your warranty. Do not use the flash frequently or take
Inhaltszusammenfassung zur Seite Nr. 16
Connecting to a Power Source Important information about battery (SLB-1137) charging If the charging LED of the SAC-41 does not turn on or blink after inserting the rechargeable battery, Charging please check whether the batteries are inserted LED correctly. Please check the battey charging status with the charging LED of SAC-41. Charging LED Status Using the cradle Direct to the camera Being Charged Red LED is on Red LED is on Charging is complete Green LED is on Green LED is on Charging error
Inhaltszusammenfassung zur Seite Nr. 17
Connecting to a Power Source : If the camera does not turn on after you have inserted batteries, Using the batteries please check whether the batteries are inserted with the correct polarity(+/-). 1. Open the battery chamber 2. Insert the batteries taking 3. To close the battery cover by pushing in the note of the polarity (+ / -). chamber cover, push it direction of the arrow. until it clicks. Removing the battery 1. Turn off the camera power. Open the battery chamber cover and move the battery
Inhaltszusammenfassung zur Seite Nr. 18
Instructions on how to use the memory card Maintenance of the memory card Be sure to format the memory card (see p.86) if you are using a newly purchased memory for the first time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera. Turn off the camera power whenever the memory card is being inserted or removed. Repeated use of the memory card will eventually reduce the memory card’s performance. Should this be the case, you will need
Inhaltszusammenfassung zur Seite Nr. 19
Instructions on how to use the memory card INFORMATION Don't remove the memory card when the function lamp is blinking as this may cause damage to data in the memory card. The camera can use SD Memory Cards and MMC (Multi Media Cards). Please consult the enclosed manual for using the MMC Cards. The SD memory card has a write protect switch Card that prevents image files from being deleted or pins formatted. By sliding the switch to the bottom of Write the SD memory card, the data will be protect
Inhaltszusammenfassung zur Seite Nr. 20
Inserting the memory card 1. Turn off the camera’s power and pull the battery chamber cover in the direction of the arrow to open. 2. Have the front of the memory card facing toward the front of the camera (lens) and the card pins toward the back of the camera (LCD monitor), and then push the memory card into the card slot until you hear a click. 3. To close, push the battery chamber cover until you hear a click. If the memory card does not slide in smoothly, do not attempt to insert it by force
