Inhaltszusammenfassung zur Seite Nr. 1
<< Previous Next >>
Installing Your Multifunction
to Your Network for the First Time
PIXMA MX420
Windows OS
1
Inhaltszusammenfassung zur Seite Nr. 2
<< Previous Next >> Installing Your Multifunction to Your Network for the First Time PIXMA MX420 Windows OS Preparing to Connect My Multifunction to My Network 3 Network Requirements 3 Important Information You Need Before Adding Your Multifunction 4 Adding Your Multifunction to the Network 5 2
Inhaltszusammenfassung zur Seite Nr. 3
Preparing to Connect My Multifunction << Previous Next >> To My Network Network Requirements Before connecting the machine to the network, make sure that configuration of the computer and access point or router is complete, and that the computer is connected to the network. Notes on Network Connection • The configuration, router functions, setup procedures and security settings of the network device vary depending on your system environment. For details, refer to your device's instruction manua
Inhaltszusammenfassung zur Seite Nr. 4
Preparing to Connect My Multifunction << Previous Next >> To My Network An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without using an access point, is not supported. Be sure to prepare an access point. Important Information You Need Before Adding Your Multifunction The following information is required to connect to your access point or router. • Access Point Name/Network Name: Also referred to as SSID. A name to identify the specifi
Inhaltszusammenfassung zur Seite Nr. 5
Adding Your Multifunction to Your Network << Previous Next >> Adding Your Multifunction to Your Network Step One Step Two Press the Setup button (A) Select Wireless LAN setup, and then press the OK button. 5
Inhaltszusammenfassung zur Seite Nr. 6
Adding Your Multifunction to Your Network << Previous Next >> Step Three Step Four Select Yes, then press the OK button. Select Easy setup, and then press the OK button. When wireless connection is enabled, the Wi-Fi lamp (D) lights blue. 6
Inhaltszusammenfassung zur Seite Nr. 7
Adding Your Multifunction to Your Network << Previous Next >> Step Five Step Six Select the access point name, then press the OK button. When one of the following screens is displayed, enter the network key using the Numeric buttons (E), then press the OK button. If the following screen is not displayed, go to step 8 NOTE: If you are living in an apartment, nearby access Press the button to switch character entry modes. points in use may be detected. Network key entry is case-sensitive.
Inhaltszusammenfassung zur Seite Nr. 8
Adding Your Multifunction to Your Network << Previous Next >> Step Seven Step Eight Make sure that the network key is correct, and then When the connected to the access point screen appears, press the press the OK button. OK button. The Setup menu screen returns. NOTE: If Failed to connect to the access point. appears, press the OK button, make sure that the network key is correct, then enter it again. If a connection still cannot be established, refer to the printed manual: Network Setup T
Inhaltszusammenfassung zur Seite Nr. 9
<> Installing the Drivers & Application Software Step One Step Two insert the Setup CD-ROM into the CD-ROM drive. If the Click Easy Install. program does not start automatically, double-click the The drivers, application software, and on-screen CD-ROM icon in Computer orMy Computer, then doubleclick manuals are installed. MSETUP4.EXE. For Windows 7/Windows Vista: Click Run Msetup4.exe on the AutoPlay screen, then click Yes or Continue on the User Account Control dialog box. If
Inhaltszusammenfassung zur Seite Nr. 10
Installing the Drivers and Software <> Step Four Step Three Select Use the printer with wireless LAN connection, then click Next. On the next screen click Install 10
Inhaltszusammenfassung zur Seite Nr. 11
Installing the Drivers and Software <> Step Five Step Six Click Yes or No for the License Agreement Adobe RGB Click Yes for the License Agreement 11
Inhaltszusammenfassung zur Seite Nr. 12
Installing the Drivers and Software <> Step Seven Step Eight Click Next on the Printer Detection screen Click Next if the Please Allow All Install Wizard Processes appears 12
Inhaltszusammenfassung zur Seite Nr. 13
Installing the Drivers and Software <> Step Ten Step Nine When the Detected Printers List appears, select Canon MX420 series Then click Next. Turn on the printer and click OK 13
Inhaltszusammenfassung zur Seite Nr. 14
Installing the Drivers and Software <
