Bedienungsanleitung Dakota Digital LAT-NR271

Inhaltszusammenfassung zur Seite Nr. 1

INSTALLATION INSTRUCTIONS
LAT-NR271
LED Tail Lights for 1970 Impala/Caprice

MAN#650218

Kit Includes:

Installation:

1. Remove the two screws and lens on each tail light.
2. Remove the light bulb from socket.
3. Carefully remove the gasket from the housing. If the gasket is hard or brittle it should be
replaced.


4. Now is a good time to clean or replace the lenses and housings if necessary. If the lenses are
in poor condition a replacement set is recommended.
MAN#6

Inhaltszusammenfassung zur Seite Nr. 2

5. Insert the LED assembly bulb base into the tail light housing socket. 6. Place the new LED assembly into the housing so that the mounting bracket sits into the groove for the lens gasket. 7. Replace the lens gasket. The gasket will sit on top of the mounting bracket tabs. 8. Replace the lens and carefully tighten the screws. 9. Repeat for the other tail light. 10. Test the tail lights, brake lights, and turn signals. If the turn signals do not flash you will need to upgrade your f