Inhaltszusammenfassung zur Seite Nr. 1
DVD-R DRIVE
DVR-S201
Operating Instructions
R
Inhaltszusammenfassung zur Seite Nr. 2
This product complies with the Low Voltage Directive (73/ IMPORTANT 23/EEC), EMC Directives (89/336/EEC, 92/31/EEC) and CE The accessory power cord can only be used on the continent Marking Directive (93/68/EEC). of North America. In Europe, do not use the accessory power cord. Consult with the company sales representative. “Use Only Safety Licensed Power Cord.“ Ce produit est conforme à la directive relative aux appareils basse tension (73/23/CEE), aux directives relatives à la A certified powe
Inhaltszusammenfassung zur Seite Nr. 3
Thank you for buying this PIONEER product. 7 CONTENTS Please read through these operating instructions so you will know how to operate your model properly. After you have INSTALLATION-RELATED PRECAUTIONS ....... 5 finished reading the instructions, put them away in a safe PRIOR TO USING THIS PRODUCT ................... 5 place for future reference. In some countries or regions, the Confirm that you have received the following shape of the power plug and power outlet may sometimes differ from tha
Inhaltszusammenfassung zur Seite Nr. 4
IMPORTANT! SAFETY INSTRUCTIONS 1. READ INSTRUCTIONS – All the safety and operating 10. PLUG – This product is equipped with a wired grounding 15. SERVICING – Do not attempt to service this product instructions should be read before the appliance is type plug (a plug having a third (grounding) pin). yourself as opening or removing covers may operated. This plug will only fit into a grounding type power expose you to dangerous voltage or other hazards. 2. RETAIN INSTRUCTIONS – The safety and opera
Inhaltszusammenfassung zur Seite Nr. 5
INSTALLATION-RELATED PRECAUTIONS 7 Operating Environment: 7 Operating Precautions: Ö Operating Temperature Range: +5 °C to +30 °C Ö Maintain a cleared area around the air intake vent to Ö Operating Humidity Range: 10 % to 80 % prevent the internal temperature of the drive from (with no condensation) rising Ö Place the drive on a stable, level surface Ö Avoid placing objects on top of the drive 7 Installation Locations: Ö Run the drive only in the horizontal position Ö Avoid exposure to direct su
Inhaltszusammenfassung zur Seite Nr. 6
PRIOR TO USING THIS PRODUCT Ö Avoid specially shaped discs such as hearts or polygons Usage Precautions 7 Drive-related: Ö Avoid vibrations and shocks to the drive while in operation Ö Do not power down or remove cables from the drive while in operation Ö Keep the disc tray closed when not in use Ö Turn off the drive and disconnect the power cable when Ö Remove dust or lint from the disc with a soft cloth by not in use wiping from the inside to the outside edge rather than in a circular motion 7
Inhaltszusammenfassung zur Seite Nr. 7
PART NAMES AND FUNCTIONS Front Panel Rear Panel 1 2 3 8 9 DVD-R DRIVE DVR-S201 SCSI ID ON OFF TERMINATION R SCSI DISC READ/WRITE AC IN 4 5 6 7 0 - 1 Disc tray 6 OPEN/CLOSE (0) button Place the disc on the tray with its label side facing up (Operate Opens and closes the disc tray with the OPEN/CLOSE button) 7 POWER switch 2 Filter cover Turns the power ON and OFF Sliding the filter cover to the right and then removing it will expose the filter located to the rear of the cover. Note that the 8 SC
Inhaltszusammenfassung zur Seite Nr. 8
CONNECTION The power cord and SCSI cable (sold on the market) must be 7 Setting the TERMINATION Switch connected for operation of this drive. SCSI cable After connecting the cord and cable, set the TERMINATION switch and the SCSI ID. Computer When connecting the cord and cable or changing connections and settings, turn OFF the POWER switch then unplug the A B power cord from the outlet. Example of SCSI chain connection If the computer has no SCSI connector, install a SCSI adapter board (sold on
Inhaltszusammenfassung zur Seite Nr. 9
CONNECTION 7 Setting the SCSI ID 7 SCSI Connector Pin Configuration and Signals The SCSI ID is set using the switch on the device’s rear panel. Connector pin numbers and configurations are shown in The computer will recognize each connected SCSI device the following diagram. No.25 No.1 by its SCSI ID. Generally, the SCSI IDs are set as follows: “0” for a hard disk, “3” for a CD-ROM and “7” for a SCSI interface board (card). Refer to the operating instructions that accompany each device to verify
Inhaltszusammenfassung zur Seite Nr. 10
OPERATION The DVD-R writing system consists of a personal computer 7 Starting Up the DVD-R System (PC) and the DVD-R Drive. 1. Turn ON the power to the DVD-R Drive. In order to operate the DVD-R Drive, the accompanying 2. Turn ON the power to the PC. application software and disc driver must be installed on the 3. Press the OPEN/CLOSE button to open the tray. computer. (If the computer cannot accommodate the 4. Place the disc in the tray with its label side facing up. accompanying application so
Inhaltszusammenfassung zur Seite Nr. 11
DVD-R DRIVE DVR-S201 R OPERATION Replacing the filter Emergency Disc Removal 1. Hold both ends of the filter cover and slide it in the In the following cases, discs can be ejected using the direction indicated by the arrow in the diagram below to emergency ejection hole. remove the cover. Ö Trouble with the device makes it impossible to remove the disc using the OPEN/CLOSE button or a software command. Ö A disc that you need to eject remains inside the device but DVD-R DRIVE DVR-S201 the power
Inhaltszusammenfassung zur Seite Nr. 12
OTHER USEFUL INFORMATION Troubleshooting DVD-R Discs If you suspect trouble, check the status of operations for the 7 When data cannot be recorded or errors following situations: occur during recording: Ö Is the disc one that may be used with this device? 7 The power indicator does not light. Ö Has a sufficiently large writing area been secured? Ö Has the power cord been connected properly? Ö Was the DVD-R finalized (made so that no more writing Ö Has the POWER switch been turned ON? is possible
Inhaltszusammenfassung zur Seite Nr. 13
OTHER USEFUL INFORMATION 7 Others Specifications Power supply ................... AC 100 to 240 V/0.7 A, 50/60 Hz Dimensions ......................... 198 (W) x 65 (H) x 254 (D) mm 7 General Weight ........................................................................ 2.8 kg Discs that can be used Operating temperature ............................... +5 °C to +30 °C Ö DVD-R discs (3.95 GBytes and 4.7 GBytes) Operating humidity .. 10 % to 80 % (with no condensation) Ö DVD-ROM discs (single and
Inhaltszusammenfassung zur Seite Nr. 14
AFTER-SALES SERVICE FOR PIONEER PRODUCTS Please contact the dealer or distributor from where you purchased the product for its after-sales service (including warranty conditions) or any other information. In case the necessary information is not available, please contact the Pioneer's subsidiaries (regional service headquarters) listed below: PLEASE DO NOT SHIP YOUR PRODUCT TO THE COMPANIES at the addresses listed below for repair without advance contact, for these companies are no
