Inhaltszusammenfassung zur Seite Nr. 1
VIDEO DISK RECORDER
VDR-3000
INSTRUCTION MANUAL
http://www.datavideo-tek.com
COMPATIBLE
Inhaltszusammenfassung zur Seite Nr. 2
CONTENTS Introduction Packing list --------------------------------------------------------------------------- 3 Front & Rear Panel ---------------------------------------------------------------- 4 Display Panel ----------------------------------------------------------------------- 7 Remote Control Handset -------------------------------------------------------- 8 Connections Connection a TV/Monitor --------------------------------------------------------- 11 Connecting an an
Inhaltszusammenfassung zur Seite Nr. 3
PACKING LIST VDR-3000 is supplied with the following accessories: Infrared Remote Control Handset 2 x “AAA” Batteries for Handset Main Power Cord S-Video Cable 3 Phono (RCA) to 3 Phono (RCA) Audio/Video Cable IEEE1394 “Firewire” Cable (DV Model only) 3 SLOW R TU E RN MUTE POWER 12 34 56 7 8 90 +10 CE ENT COMP. PLAY LIST TIME MODE DISPLAY VIDEO BOOK MARK PL TM OSD O/ P BM CLEAR TIME SET PAL/ NTSC LANG RECALL CL TS P/ N LAN G RC
Inhaltszusammenfassung zur Seite Nr. 4
CD-RW Rewritable CD. Rear Panel 1 3 4 INPUT COMPONENT VIDEO OUTPUT SOURCE INPUT Y/ G PBR / B P / R OUTPUT AC INPUT DIGITAL INPUT RIGHT LEFT VIDEO S AUDIO VIDEO 230VAC AC VOLTS 2 7 6 5 1. Main Power Cord connecting socket To connect to the main power supply 2. AC Main voltage selector Sets the voltage input to 115 VAC or
Inhaltszusammenfassung zur Seite Nr. 5
7. Digital Audio Input To connect a audio digital signal from a CD player to duplicate an audio CD without sound quality loss. Please note: The Audio Digital Duplicate is only available with Audio CD-R due to copyright protection. Front Panel 8 9 10 17 18 19 22 20 24 21 R Video Disk Recorder CDDVD/ S-VCD/ VCD/ CD VDR-3000 EJECT REC REW F.F. MENU DV POWER / FINALIZE
Inhaltszusammenfassung zur Seite Nr. 6
15. PBC Button Playback control button for commercially produced VCD’s 16. CD Tray To load discs into the unit 17. Display Panel (see separate illustration) Shows current status of unit. 18. Eject Button To Open the CD Tray for loading or removing CD 19. REC Button To start recording 20. REW Button To picture search backward through a track. Several speeds are available each press of the button will increase the speed. 21. F.F. Button To picture search forward through
Inhaltszusammenfassung zur Seite Nr. 7
Display Panel 1 2 3 6 7 8 9 REPEAT 1 A- B CD TRK PBC Super VCD 4 5 10 11 1. Infrared receiver Receives signals from the Infrared Remote Control Handset 2. DV on LED Indicates the DV source is selected 3. CD/Super/VCD Indicates the format of the loaded disk or the selected recordin
Inhaltszusammenfassung zur Seite Nr. 8
SL OW RETURN Infrared Remote Control Handset MUTE POWER 1 36 12 34 2 5 678 +10 90 CE 35 3 4 34 5 33 ENT 32 6 7 31 30 8 9 29 0 1 PLAY LIST TIME MODE DISPLAY BOOK MARK VIDEO 28 PL TM OSD O/ P BM 1 1 27 CLEAR TIME SET PAL/ NTSC LANG RECALL CL TS P/ N LAN G RC 26 12 AUDI O VI DEO 13 25 I/ P I/ P 14 24 15 REW PLAY F.F ERASE 23 16 22 STEP PAUSE STOP 17 STP REC 21 18 20 19 VDR-3000 1. Power Button To switch the unit from On to Standby mode or vice versa. 2. Numerical Keypad To giv
Inhaltszusammenfassung zur Seite Nr. 9
7. REPEAT Button Offers repeat playback options. Press once to repeat a single track, twice to repeat the entire disk or three times to turn repeat function off. 8. DOWN Arrow Navigates down through on screen menu options. Also with on screen controls reduces the setting 9. PBC Button (Playback Control) Offers playback control options for commercially produced VCD’s 10. Video Output Button To select video output format: Composite, S (Y/C), Y.U.V
Inhaltszusammenfassung zur Seite Nr. 10
22. PLAY Button To start the disk playing 23. REW Button To picture search backwards through a track. Several speeds are available each press of the button will increase the speed 24. Audio Input Button To select the digital audio or analog audio input source 25. TS Button (Time Set) To jump to any point on a disk enter the time in minutes and seconds 26. CL Button (Clear) Clears entries from the user programmable Play List 27. P
Inhaltszusammenfassung zur Seite Nr. 11
CONNECTIONS Connecting to a TV Monitor NOTE: While connecting please ensure that the VDR 3000 and all devices that you are connecting to are switched off. The VDR 3000 should be connected to the video and audio inputs of a TV Monitor. The TV Monitor may have a SCART socket, PHONO (RCA) sockets or S-Video socket. TV/ Monitor RL S Selects the input source to Video Selects the AC input range 115VAC or 230VAC for VDR-3000 To connect to a SCART input a three phono (RCA) pl
Inhaltszusammenfassung zur Seite Nr. 12
Connecting an analog video source NOTE: While connecting please ensure that the VDR 3000 and all devices that you are connecting to are switched off. TV/ Monitor Source Audio/ Video RL S Selects the input source to Video Selects the AC input range 115VAC or 230VAC for VDR-3000 An analog video device can be connected via composite or S-Video if available. Connect the left and right audio output from the device to the left and right audio input on the rear of the VDR 3000. Connec
Inhaltszusammenfassung zur Seite Nr. 13
Connecting a DV video source (DV Model only) NOTE: During connection please ensure that the VDR 3000 and all devices that you are connecting are switched off. Source Player TV/ Monitor DV IN/OUT DV In DV Out RL S Selects the input source to DV Selects the AC input range 115VAC or 230VAC for VDR-3000 Connect the IEEE1394 “iLink” cable from your DV/mini DV device to the DV Input socket on the front of the VDR 3000. Set the Input Selector Switch on the rear of the VDR 3000 to
Inhaltszusammenfassung zur Seite Nr. 14
Connecting a Digital Still Camera NOTE: While connecting please ensure that the VDR 3000 and all devices that you are connecting to are switched off. Digital Photo Camera Video Out Audio CD Player TV/ Monitor Audio Out RL S Selects the input source to Video Selects the AC input range 115VAC or 230VAC for VDR-3000 Digital still cameras can be connected to the Video Input on the rear of the VDR 3000. Connect the Video Out from the Digital Still Camera to the Video In Phono (RCA) s
Inhaltszusammenfassung zur Seite Nr. 15
Connecting to a Projection TV / Monitor with Component Video NOTE: While connecting please ensure that the VDR 3000 and all devices that you are connecting to are switched off. The VDR 3000 should be connected to the component R.G.B. or Y.U.V. video and audio inputs of a Projection TV / Monitor. Project TV/ Monitor Y P R P B R B G To Hi-Fi System Selects the AC input range 115VAC or 230VAC for VDR-3000 To connect to a component input a three BNC plug (R.G.B. or Y.U.V. Vid
Inhaltszusammenfassung zur Seite Nr. 16
Connecting a Digital Audio CD Player (Optional) NOTE: During connection please ensure that the VDR 3000 and all devices that you are connecting are switched off. Digital Audio Player AUDIO CD OPT. Optical Cable To Hi-Fi System or TV/ Monitor Audio Input Jack Selects the AC input range 115VAC or 230VAC for VDR-3000 To connect to a digital audio input either a optical fiber plug to a optical fiber plug cable or phono (RCA) plug to phono (RCA) plug cable will be required. To connect th
Inhaltszusammenfassung zur Seite Nr. 17
OPERATION Switching on Once all cables are in place it is ok to power on the VDR-3000. Press the Power Button on the front of the VDR 3000 or on the remote control handset, the display panel should light up and display ” - - - -“. Power on the TV Monitor and select the correct A/V channel, the VDR 3000 start-up screen will appear. The TV screen it will display ” Insert CD”. 1 Playing a disk Press the Eject Button on the front of the VDR 3000 or on the remote control
Inhaltszusammenfassung zur Seite Nr. 18
To return to the previous track press the Previous Button on the VDR 3000 or remote control handset If you wish to search through a track during playback you can press the F.F. Button. There are several speeds available and pressing the F.F. Button will cycle through to a faster fast forward speed. To search back through a track, press the REW Button. There are several speeds available and each press of the REW Button will cycle through to a faster rewind speed. To pause a track
Inhaltszusammenfassung zur Seite Nr. 19
2 The VDR 3000 will take a few moments to prepare the disk for recording. If CDDVD, DVD- PHOTO, HQ-VCD, VCD or SVCD has been selected then once prepared the VDR 3000 start up screen will disappear and the system will be ready to start recording. If CD-DA is selected the VDR 3000 start up screen will remain on the TV. Select the video input source: DV Input (Option): To select a DV input source, set the slide switch on the rear panel to DV position. Analog Input: To select the anal
Inhaltszusammenfassung zur Seite Nr. 20
After set up the audio/video input and output. Start the source machine playing, in the case of a video source the picture will appear on the TV screen. Find the footage that you want to record to the disc and press the Rec. Button. On the TV screen “record” will appear in the corner of the screen and after a moment “recording” will appear. The display panel will start counting up in minutes and seconds to indicate the recording length. When you reach the end of the footage press the S
