Inhaltszusammenfassung zur Seite Nr. 1
INSTALLATION MANUAL
OUTDOOR COMBINATION CAMERA
C-CC714 NT
C-CC714 PL
C-CC764 NT
C-CC764 PL
Thank you for purchasing TOA’s Outdoor Combination Camera. Please carefully follow the instructions in
this manual to ensure long, trouble-free use of your equipment.
Inhaltszusammenfassung zur Seite Nr. 2
TABLE OF CONTENTS 1. SAFETY PRECAUTIONS ............................................................................... 3 2. GENERAL DESCRIPTION ............................................................................. 5 3. FEATURES .......................................................................................................... 5 4. HANDLING PRECAUTIONS .......................................................................... 6 5. NOMENCLATURE .....................................
Inhaltszusammenfassung zur Seite Nr. 3
1. SAFETY PRECAUTIONS • Be sure to read the instructions in this section carefully before use. • Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded as very important precautions are included. • We also recommend you keep this instruction manual handy for future reference. Safety Symbol and Message Conventions Safety symbols and messages described below are used in this manual to prevent bodily injury and property damage which could res
Inhaltszusammenfassung zur Seite Nr. 4
When Installing the Unit • Avoid installing the unit in locations exposed to sea breeze or corrosive gas. Mounts may become corroded, eventually causing the unit to fall off, which could result in personal injury. • Do not mount the unit in locations exposed to constant vibration. The mounting screws and/or bolts may be loosened by excessive vibration, potentially causing the unit to fall, which could result in personal injury. • Avoid installing the unit at heights exceeding 16 meters above the
Inhaltszusammenfassung zur Seite Nr. 5
2. GENERAL DESCRIPTION TOA’s dome-type color cameras combine with a high-speed camera drive that permits one 360-degree horizontal rotation per second and a 22 times (C-CC714) or a 23 times (C-CC764) optical zoom lens. Up to 255 arbitrary positions can be preset and such preset positions can be instantaneously repeated. The systems also feature a 12 times electronic zoom, timer, and tracing, while the C-CC764 offer additional functions that include a motion detector, auto flip, black & white mod
Inhaltszusammenfassung zur Seite Nr. 6
4. HANDLING PRECAUTIONS • Noise may appear on the monitor or preset camera positions may deviate with prolonged camera use. In such cases, use the camera’s refresh function to automatically refresh settings and reestablish the home position once a day or week, thus allowing any position deviation to be corrected. When correcting manually, initialize the camera from the remote controller. • The AC line is equipped with a surge protector to protect the camera against lightning strikes and other po
Inhaltszusammenfassung zur Seite Nr. 7
• The dome camera features built-in heat generating circuitry. Take care not to touch the internal parts marked “Caution! High Temperature” when working inside the camera during dome cleaning or maintenance . • Avoid directly touching the dome surface, since camera picture quality could deteriorate if the dome cover becomes smudged and dirty. • To clean, be sure to first unplug the power plug from the AC outlet, then wipe with a dry cloth. When the unit gets very dirty, use a cloth dampened in a
Inhaltszusammenfassung zur Seite Nr. 8
5. NOMENCLATURE [ Appearance ] [ Camera Unit Appearance ] 1 3 2 4 6 5 [ Camera Unit Bottom ] [ Housing Appearance ] 15 14 7 13 9 9 8 [ Camera Unit Top ] [ Housing Bottom ] 11 19 9 9 16 10 17 9 9 18 11 19 20 12 8
Inhaltszusammenfassung zur Seite Nr. 9
[ C-BC711W Wall Mounting Bracket (optional) ] [ C-BC711P Suspension Bracket (optional) ] 23 21 22 22 [ C-BC711PM Pole Mounting Bracket (optional) ] 24 (1) Top cover (14) COM LED* (2) Safety wire for housing (15) COM PORT* (3) Housing adaptor (16) DIP switch (SW1) (4) Safety screw (17) DIP switch (SW2) (5) Dome cover (18) DIP switch (SW3) (6) Decorative frame (19) Camera unit mounting hole (7) Sunshade (Outside) (20) Safety wire for camera unit (8) Case (Inside) (21) Wall mounting bracket (9) Hex
Inhaltszusammenfassung zur Seite Nr. 10
6. CONNECTIONS Power cable Connects to the power supply. (24V AC 50/60 Hz) Alarm input/output terminal (No. 1 - 5) Connects to the sensor of no-voltage make contact or the external equipment that can be controlled using the auxiliary output. Camera control terminal (No. 6 - 8) Connects to cables from the Remote Controller or other camera when controlling the camera using the RS-485 communications line. Wire color Dot color Terminal name 1 Orange Black GND 2 Orange Red
Inhaltszusammenfassung zur Seite Nr. 11
6.2. Camera Control Connector Connection (RS-485) • Connect terminals (+) and (–) of the C-RM500 Remote Controller or the C-IF500 Interface Unit to the camera's terminals (+) (terminal No. 8) and (–) (terminal No. 7), respectively. • Connect the camera's terminals (+) and (–) to the next camera's terminals (+) and (–) in order. Notes • The maximum number of units connectable to a pair of RS-485 lines (from termination to termination) is 32 units including the Remote Controller. The maximum cabl
Inhaltszusammenfassung zur Seite Nr. 12
7.3. Dip Switch Settings DIP SW1 DIP SW2 DIP SW3 DIP SW1 DIP SW2 DIP SW3 Communication speed setting No.1 Camera address setting switch 1 Firmware update switch 1 switch 1 Communication speed setting No.2 Camera address setting switch 2 Firmware update switch 2 switch 2 No.3 Camera address setting switch 3 Firmware update switch 3 OSD switch No.4 Camera address setting switch 4 Unused Unused No.5 Camera address setting switch 5 Unused Unused Communication method selector No.6 Camera addres
Inhaltszusammenfassung zur Seite Nr. 13
7.3.2. Communication Speed Setting Switch (DIP switch 2: No. 1 – 2) Check to be sure that the communication speed set here is the same as that of the Remote Controller. When changing the speed, change settings of all cameras and Remote Controller within the system. (Factory setting: 38,400 bps.) No.2 No.1 bps OFF OFF 38400 O N OFF 19200 OFF O N 9600 O N O N 4800 7.3.3. OSD Switch (DIP switch 2: No. 3) When this switch is set to the OFF position, the initial screen does not disappear until comm
Inhaltszusammenfassung zur Seite Nr. 14
[ Camera address setting switch: 1 - 64 ] DIP switch 1 DIP switch 1 DIP switch 1 DIP switch 1 No. No. No. No. ON ON ON ON 117 33 49 12345678 12345678 12345678 12345678 ON ON ON ON 218 34 50 12345678 12345678 12345678 12345678 ON ON ON ON 319 35 51 12345678 12345678 12345678 12345678 ON ON ON ON 420 36 52 12345678 12345678 12345678 12345678 ON ON ON ON 521 37 53 12345678 12345678 12345678 12345678 ON ON ON ON 622 38 54 12345678 12345678 12345678 12345678 ON ON ON ON 723 39 55 12345678 12345678 12
Inhaltszusammenfassung zur Seite Nr. 15
[ Camera address setting switch: 65 - 128 ] DIP switch 1 DIP switch 1 DIP switch 1 DIP switch 1 No. No. No. No. ON ON ON ON 65 81 97 113 12345678 12345678 12345678 12345678 ON ON ON ON 66 82 98 114 12345678 12345678 12345678 12345678 ON ON ON ON 67 83 99 115 12345678 12345678 12345678 12345678 ON ON ON ON 68 84 100 116 12345678 12345678 12345678 12345678 ON ON ON ON 69 85 101 117 12345678 12345678 12345678 12345678 ON ON ON ON 70 86 102 118 12345678 12345678 12345678 12345678 ON ON ON ON 71 87 1
Inhaltszusammenfassung zur Seite Nr. 16
[ Camera address setting switch: 129 - 192 ] DIP switch 1 DIP switch 1 DIP switch 1 DIP switch 1 No. No. No. No. ON ON ON ON 129 145 161 177 12345678 12345678 12345678 12345678 ON ON ON ON 130 146 162 178 12345678 12345678 12345678 12345678 ON ON ON ON 131 147 163 179 12345678 12345678 12345678 12345678 ON ON ON ON 132 148 164 180 12345678 12345678 12345678 12345678 ON ON ON ON 133 149 165 181 12345678 12345678 12345678 12345678 ON ON ON ON 134 150 166 182 12345678 12345678 12345678 12345678 ON
Inhaltszusammenfassung zur Seite Nr. 17
[ Camera address setting switch: 193 - 255 ] DIP switch 1 DIP switch 1 DIP switch 1 DIP switch 1 No. No. No. No. ON ON ON ON 193 209 225 241 12345678 12345678 12345678 12345678 ON ON ON ON 194 210 226 242 12345678 12345678 12345678 12345678 ON ON ON ON 195 211 227 243 12345678 12345678 12345678 12345678 ON ON ON ON 196 212 228 244 12345678 12345678 12345678 12345678 ON ON ON ON 197 213 229 245 12345678 12345678 12345678 12345678 ON ON ON ON 198 214 230 246 12345678 12345678 12345678 12345678 ON
Inhaltszusammenfassung zur Seite Nr. 18
8. INSTALLATION The Combination Camera weight 4.4 kg. Select the heavy-duty mounting surface that can structurally support the weight of the WARNING camera. Doing otherwise may result in the unit falling and possibly causing personal injury. 8.1. About Installation • Mount the camera to a heavy-duty wall surface using the optional C-BC711W Wall Mounting Bracket. • When installing the camera on a pole, use the optional C-BC711W Wall Mounting Bracket, C-BC711PM Pole Mounting Bracket and 2 YS-60B
Inhaltszusammenfassung zur Seite Nr. 19
8.3. Wall Mounting Bracket Installation Use the optional C-BC711W Wall Mounting Bracket. Notes • Check to be sure that wall surface can structurally support the weight of the camera and mounting bracket • Bolts, nuts and washers are not supplied with the bracket. Use bolts, nuts and washers that are appropriate for the wall's structure and composition. • Be sure to hang the safety wire first when installing the unit. 1. Make a cable entry hole of ø 50 – 100mm on a wall. Wall surface C-BC711W (o
Inhaltszusammenfassung zur Seite Nr. 20
8.4. Attaching Housing and Camera Unit to Wall Mounting Bracket 1. Loosen 2 safety screws. Safety screw Safety wire Safety screw Housing 2. Run the safety wire through the top cover, then hang the hook to the mounting bracket. 3. Run the top cover through the pipe, then connect cables. Wall surface Top cover Safety wire Insulate the terminals by wrapping the (vinyl) insulating tape around it. Housing Refer to p.10 “Precautions when installing the camera”. 20
