Inhaltszusammenfassung zur Seite Nr. 1
INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION
TM
EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS
OF EMERSON RADIO CORP., PARSIPPANY, NEW JERSEY, U.S.A.
32” Digital / Analog
LCD TV
Owner’s Manual
LC320EM82
LC320EM81
LC320EM8A
HIGH-DEFINITION TELEVISION
TO RECEIVE DIGITAL/ANALOG SIGNAL,
YOU MUST CONNECT ANTENNA.
IF YOU NEED ADDITIONAL ASSISTANCE WITH SETUP OR OPERATING AFTER
READING OWNER’S MANUAL, PLEASE CALL TOLL FREE 1-800-256-2487,
Inhaltszusammenfassung zur Seite Nr. 2
NTRODUCTION I WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC RISK OF ELECTRIC SHOCK SHOCK IS PRESENT WITHIN THIS UNIT. DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC THIS SYMBOL INDICATES THAT THERE ARE SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER IMPORTANT OPERATING AND MAINTENANCE SERVICEABLE PARTS INSIDE. REFER SERVICING TO INSTRUCTIONS
Inhaltszusammenfassung zur Seite Nr. 3
INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION 17. OBJECT AND LIQUID ENTRY - Never push objects of any kind into 20. REPLACEMENT PARTS - When replacement parts are required, be this TV through openings as they may touch dangerous voltage sure the service technician uses replacement parts specified by points or short out parts that could result in a fire or electric shock. the manufacturer that have the same characteristics as the original Neve
Inhaltszusammenfassung zur Seite Nr. 4
NTRODUCTION I LOCATION For safe operation and satisfactory performance of the unit, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places. • Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes. • Insta
Inhaltszusammenfassung zur Seite Nr. 5
INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Features Contents • DTV/TV/CATV INTRODUCTION - You can use your remote control to select channels Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 which are broadcast in digital, conventional analog, Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 standard de
Inhaltszusammenfassung zur Seite Nr. 6
NTRODUCTION I Remote Control Function 1. POWER button (p12) 11. SLEEP button (p20) Press to turn the unit on and off. Press to activate the sleep timer. 2. Number buttons (p15) 12. AUDIO button (p17) Digital Mode (DTV) • Press to select channels. - button Press to select the audio language. Analog Mode (TV) • Press to shift the minor channel Press to select the audio mode. from the major channel. 13. STILL button (p16) 3. SETUP button (p13) Press to pause screen image. Press to display the m
Inhaltszusammenfassung zur Seite Nr. 7
INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Control Panel 1 1. SETUP button (p13) 2 Press to display the main menu. 3 X Y 4 2. VOLUME / buttons (p15) 5 X Y Press to adjust the volume or move right ( )/left ( ) through the main menu items. INPUT VOLUME CHANNEL SETUP POWER SELECT K L 3. CHANNEL / buttons (p15) top of this unit Press to select channels or move up/down through the main menu items. 4. INPUT SELECT button (p16) • Press to acc
Inhaltszusammenfassung zur Seite Nr. 8
ONNECTION C Cables not included. Please purchase the necessary cables at your local store. Basic Connection This section describes how to connect the unit to an antenna, cable/satellite box, etc. Note: • Be sur e your antenna or other device is connected properly before plugging in the power cord. [Antenna Cable Connection] When connecting the unit to an antenna or cable TV company (without cable/satellite box) Connect the RF coaxial cable on your home outlet to the antenna input jack of this u
Inhaltszusammenfassung zur Seite Nr. 9
INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Cables not included. Please purchase the necessary cables at your local store. External Device Connection [HDMI Connection] HDMI (High Definition Multimedia Interface) transports high definition video and multi-channel digital audio through a single cable. It ensures that the content sent from the source to TV is of the highest possible resolution. rear of this unit e.g.) To HDMI - IN jack HDMI cab
Inhaltszusammenfassung zur Seite Nr. 10
ONNECTION C Cables not included. Please purchase the necessary cables at your local store. [Component Video Cable Connection] Component video connection offers better picture quality for video devices connected to the unit. Use a component video cable to connect the unit to external video devices equipped with component video output jacks. If you connect to the unit’s COMPONENT 1 video input jack, connect RCA audio cables to the audio L/R jacks of COMPONENT 1. If you connect to the unit’s COMP
Inhaltszusammenfassung zur Seite Nr. 11
INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Cables not included. Please purchase the necessary cables at your local store. [Video Connection] Video connection offers standard picture quality for video devices connected to the unit. If you connect to the unit’s VIDEO 1 video input jack, connect RCA audio cables to the audio L/R jacks of VIDEO 1. If you connect to the unit’s VIDEO 2 video input jack, connect RCA audio cables to the audio L/R jac
Inhaltszusammenfassung zur Seite Nr. 12
NITIAL SETTING I These operations are accessible by remote control. Some may also be accessible by controls on the main unit. Note: Initial Setup • If you connect the cable system directly, contact the CATV This section will guide you through the unit’s initial setting which includes installer. selecting a language for your on-screen menu and auto channel scan, • If you press [POWER] or [SETUP] during auto channel which automatically scans and memorizes viewable channels. scan, this setting
Inhaltszusammenfassung zur Seite Nr. 13
INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Main Menu Auto Channel Scan This section describes the overview of the main menu displayed when you If you switch wires (e.g., between antenna and CATV) or if you move the TV press [SETUP]. For more details, see the reference page for each item. to a different area after the initial setting, or if you restore the DTV channel The main menu consists of the function setting items below. you deleted,
Inhaltszusammenfassung zur Seite Nr. 14
NITIAL SETTING I Language Selection Note: You can choose English, Spanish, or French as your on-screen language. • If you connect the cable system directly, contact the CATV installer. • If you press [POWER] or [SETUP] during auto channel scan, the setting will be canceled. • Channel settings will be saved even if the power fails. Press [SETUP] to display the main menu. 1 • If you need the English menus instead of the Spanish or French menus you are having, press [SETUP]. Use [Cursor K / L]
Inhaltszusammenfassung zur Seite Nr. 15
INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION ATCHING TV W Channel Selection Volume Adjustment Select channels by pressing [CH K / L] or [the Number buttons]. This section describes how to adjust the volume. The mute function, which turns the sound off and on, is also described. K X Y • To select the memorized channels, use [CH / L] or Use [VOL. / ] to adjust the audio volume. [the Number buttons]. • To select the non-memorized channels
Inhaltszusammenfassung zur Seite Nr. 16
ATCHING TV W Still Mode Switching Each Mode You can freeze the image shown on the TV screen. You can easily switch with the remote control to the DTV (ATSC) and TV (NTSC) or to access an external device when they are connected to the unit. Press [STILL] to pause the image shown on the screen. Press [INPUT SELECT] or [CH K] repeatedly to cycle through the input modes. Still TV/DTV channel Video1 • The sound output will not be paused. or • If no signal is detected or protected signal is rec
Inhaltszusammenfassung zur Seite Nr. 17
INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION Switching Audio Mode This section describes how to switch the audio language. TV DTV Press [AUDIO] to display the currently selected Press [AUDIO] to display the currently selected 1 1 audio mode. While receiving an MTS broadcast, language and the number of available languages. press repeatedly to cycle through the available audio 6-1 channel. English 1/3 6 SAP / STEREO Press [AUDIO] repe
Inhaltszusammenfassung zur Seite Nr. 18
ATCHING TV W Screen Information You can display the currently selected channel or other information such as the audio mode on the TV screen. DTV TV In the digital mode, the detailed broadcasting information for the current In the analog mode, the current channel number and the audio mode are channel such as program title, program guides are displayed. displayed. Press [INFO] to display the details of the currently Press [INFO]. selected program. 6 SAP / STEREO 480i 480i SD SD 4:3 4:3
Inhaltszusammenfassung zur Seite Nr. 19
INTRODUCTION CONNECTION INITIAL SETTING WATCHING TV OPTIONAL SETTING TROUBLESHOOTING INFORMATION TV Screen Display Mode 4 types of display modes can be selected when the broadcasting station is sending 4:3 or 16:9 video signal. Press [SCREEN MODE] repeatedly to switch the TV For 16:9 video signal aspect ratio. Full Zoom (normal) For 4:3 video signal Full Sidebar (normal) Expand Cinema [Full] Display a 16:9 picture at its original size. [Zoom] Display a 16:9 picture at its maximum size with
Inhaltszusammenfassung zur Seite Nr. 20
ATCHING TV W Sleep Timer The sleep timer can be set to automatically turn off the unit after an incremental period of time. Press [SLEEP] to set the sleep timer. 1 Sleep Off • Sleep timer display appears on the TV screen. Press [SLEEP] repeatedly to change the amount of time 2 until shut off. Sleep 120min. • You can set your unit to turn off after a set period of time (from 30 to 120 minutes). • Each press of [SLEEP] will increase the time by 30 minutes. • After set up, the sleep time
