Inhaltszusammenfassung zur Seite Nr. 1
PLASMA DISPLAY MONITOR
INSTRUCTIONS
GD-V422U
GD-V502U
For customer Use:
Enter below the Model No. and the Serial
No. which is located on the rear panel of the
cabinet. Retain this information for future
reference.
Model No.
Serial No.
Inhaltszusammenfassung zur Seite Nr. 2
WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified service personnel. The lightning flash with The exclamation point within arrow-head within a triangle a triangle is intended to tell is intended to tell the user the user that important that parts inside the product operating and servicing are a risk of electric shock to instructions are in the papers persons. with t
Inhaltszusammenfassung zur Seite Nr. 3
Important Safety Instructions 1) Read these instructions. All the safety and operating instructions should be read before the appliance is operated. 2) Keep these instructions. The safety and operating instructions should be retained for future reference. 3) Heed all warnings. All warnings on the appliance and in the operating instructions should be adhered to. 4) Follow all instructions. All operating and use instructions should be followed. 5) Do not use this apparatus near water. Fo
Inhaltszusammenfassung zur Seite Nr. 4
Dear JVC Customer Welcome to the JVC family of customers. We hope that you will have many years of enjoyment from your new Plasma Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt also, and note down the model number and serial number of your set in the space provided on the cover of these instructions. Table of Contents Important Safety Instructions ..................
Inhaltszusammenfassung zur Seite Nr. 5
FCC STATEMENT FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio comm
Inhaltszusammenfassung zur Seite Nr. 6
Safety Precautions WARNING Set up Do not place the Plasma Display on sloped or unstable surfaces. The Plasma Display may fall off or tip over. • Do not place any objects on top of the Plasma Display. If water spills onto the Plasma Display or foreign objects get inside it, a short-circuit may occur which could result in fire • or electric shock. If any foreign objects get inside the Plasma Display, please consult an Authorized Service Center. Do not cover the ventilation holes. Doing so may ca
Inhaltszusammenfassung zur Seite Nr. 7
Safety Precautions CAUTION This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury. (All of the following accessories are manufactured by JVC) ................................................... Speakers TS-C422SPG (GD-V422U) • TS-C5001SPG (GD-V502U) ................................................. Stand Unit TS-C50P5G • ..................................
Inhaltszusammenfassung zur Seite Nr. 8
Accessories Accessories Supplied Check that you have the Accessories and items shown Operating Remote Control Batteries for the Remote AC cord Instruction book Transmitter Control Transmitter EUR646532 (AA Battery × 2) INPUT SURROUND VOL NR PICTURE SOUND SET UP MULTI ZOOM PIP SWAP SELECT MOVE GD-V422U PICTURE GD-V502U POS. /SIZE ASPECT PC OFF TIMER PLASMA DISPLAY Ferrite core Ferrite core Fixing bands (small size) × 1 (large size) × 2 Remote Control Batteries Requires two AA batteries. 1. Turn t
Inhaltszusammenfassung zur Seite Nr. 9
Connections When connecting the speakers, be sure to use only the optional accessory speakers. Refer to the speaker’s Installation Manual for details on speaker installation. (Example: GD-V422U) Speakers (Optional accessories) 1 2 1 SPEAKERS Terminals (L) 2 AC cord connection (see page 13) SPEAKERS Terminals (R) – AC cord fixing 1. Open the clamper. 2. Insert the AC cord and 3. Slide up the clamper and fix close the clamper the AC cord plug securely. securely. When loosen the clamper: AC cord Cl
Inhaltszusammenfassung zur Seite Nr. 10
Connections PC Input Terminals connection COMPUTER AUDIO PC IN INPUT MENU —VOL + ENTER R - ST G POWER ON ANDBY Less than Conversion adapter Ferrite core (large size) 15 3" /16 (if necessary) (supplied) (10 cm) mini D-sub 15p RGB PC cable Less than 15 Ferrite core (small size) 3" /16 (supplied) (10 cm) Audio Stereo plug Connect a cable which matches the audio output terminal on the computer. Installing the ferrite core (Small size) 1 2 3 Open Press the cable Pull back the tabs through and clos
Inhaltszusammenfassung zur Seite Nr. 11
Connections SERIAL Terminals connection The SERIAL terminal is used when the Plasma Display is controlled by a computer. COMPUTER 6 7 8 9 14 2 3 5 Ferrite core RS-232C SERIAL (large size) Straight cable Pin layout for RS-232C (supplied) Installing the ferrite core (Large size) Less than D-sub 9p 15 Open 3" /16 (10 cm) Notes: (1) Use the RS-232C cable to connect the computer to the Plasma Display. (2) The computer shown is for example purposes only. (3) Additional equipment and cables shown ar
Inhaltszusammenfassung zur Seite Nr. 12
Connections AV & COMPONENT Connection COMPONENT VIDEO OUT RR Example of input signal source PB Y, PB, PR, OUT RCA-BNC DVD Y adapter plug L Digital TV-SET-TOP-BOX AUDIO R OUT (DTV-STB) AUDIO R AUDIO L VIDEO IN VIDEO OUT R AUDIO L VD HD PR/CR/R PB/CB/B Y/G IN COMPONENT/RGB IN S VIDEO IN AV PC IN SLOT1 SLOT2 SLOT3 Example of input signal source S VIDEO VCR MONITOR VIDEO IN CAMCORDER VCR R L VIDEO S VIDEO OUT OUT AUDIO OUT Notes: (1) Change the “Component / RGB-in” setting in the “Setup
Inhaltszusammenfassung zur Seite Nr. 13
Power ON / OFF AC cord connection Connecting the AC cord plug to the Plasma Display. Fix the AC cord plug securely to the Plasma Display with the clamper. (See page 9) Power ON / OFF Connecting the AC plug to the Wall Outlet Note: AC plug types vary between countries / regions. Press the Main power switch on the Plasma Display to turn the INPUT MENU —VOL + ENTER G POWER ON R - STANDBY Plasma Display on: Power-On. Power Indicator: Green If the power indicator is lit red, press the power button
Inhaltszusammenfassung zur Seite Nr. 14
Basic Controls VOL INPUT MENU – + ENTER R - STANDBY G POWER ON Enter / Aspect button Main Power (see page 16, 19) On / Off Switch Remote control MENU Screen ON / OFF Power Indicator sensor Each time the MENU button is pressed, the menu The Power Indicator will light. Power-OFF .. Indicator not illuminated (The unit will screen will switch. (see page 16) • still consume some power as long as the power cord Normal Viewing PICTURE SET UP is still inserted into the wall outlet.) SOUND PICTURE POS
Inhaltszusammenfassung zur Seite Nr. 15
Basic Controls Stand-by (ON / OFF) button The Plasma Display must first be plugged into the wall outlet and turned on at the power switch (see page 13). Press this button to turn the Plasma Display On, from Standby mode. Press it again to turn the Plasma Display Off to Standby mode. SURROUND button ON OFF The benefits of surround sound are enormous. You can be completely enveloped in sound; just as if you were at a concert hall or cinema. The surround setting switches on and off ea
Inhaltszusammenfassung zur Seite Nr. 16
On-Screen Menu Displays The MENU button on the unit can also Press to select . To PICTURE adjust menu 1 be pressed. (see page 22) INPUT MENU - VOL + ENTER PICTURE NORMAL NORMALIZE PICTURE MENU STANDARD PICTURE 25 Each time the MENU button is pressed, BRIGHTNESS 0 the menu screen will switch. COLOR 0 [ from the unit ] TINT 0 SHARPNESS 3 INPUT MENU - VOL + ENTER Normal Viewing PICTURE SET UP COLOR TEMP NORMAL SOUND PICTURE POS./ SIZE ADVANCED SETTINGS ON 1 2 INPUT Press to select. 1 Press to
Inhaltszusammenfassung zur Seite Nr. 17
On-Screen Menu Display from Remote Control [ from the unit ] 2 Press to access R each adjust INPUT MENU - VOL + ENTER screen. Press the R button to return to previous menu. Press to return to previous menu screen. To SIGNAL screen for VIDEO To SIGNAL screen for To SIGNAL screen for RGB (S VIDEO) (see page 33, 34) COMPONENT (see page 34) and PC (see page 35) [ ] SIGNAL [ VIDEO ] SIGNAL COMPONENT SIGNAL [ RGB ] ( ) 3D Y/C FILTER NTSC ON 3:2 PULLDOWN OFF SYNC H & V COLOR SYSTEM AUTO H-FR
Inhaltszusammenfassung zur Seite Nr. 18
Input Signal Selection Select the Input Signal INPUT Press the INPUT button to select the input signal to be played back from the equipment which has been connected to the Plasma Display. Input signals will change as follows: R - STANDBY INPUT MENU –+ VOL ENTER G POWER ON INPUT1 INPUT2 INPUT3 PC IN INPUT MENU VOL + ENTER Notes: (1) Input terminal will not be selected if the Video Input Card is not installed into the SLOT. INPUT (2) Select to match the signals from the source connected to the
Inhaltszusammenfassung zur Seite Nr. 19
ASPECT Controls The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. ASPECT button NORMAL ZOOM FULL ASPECT The aspect mode changes each time the INPUT ASPECT button is pressed. AUTO JUST SURROUND [from the unit] VOL NR INPUT MENU - VOL + ENTER The aspect mode changes each time the ENTER button is pressed. PICTURE SOUND SET UP [During MULTI PIP Operations] NORMAL 16 : 9 MULTI ZOOM
Inhaltszusammenfassung zur Seite Nr. 20
Adjusting PICTURE POSITION/SIZE Adjusting screen INPUT PICTURE SURROUND POS. /SIZE VOL 1 N R Press to display the PICTURE POS./ SIZE menu. Press to select H-POS / H-SIZE / V-POS / PICTURE SOUND SET UP V-SIZE / CLOCK PHASE. 2 MULTI ZOOM PIP SWAP SELECT MOVE PICTURE POS. /SIZE ASPECT PC OFF TIMER During “VIDEO (S VIDEO)” and During “RGB” and “PC” Notes: PLASMA DISPLAY “COMPONENT” input signal. input signal. (1) Adjustment details are PICTURE POS./SIZE PICTURE POS./SIZE memorized separately for N
