Inhaltszusammenfassung zur Seite Nr. 1
User Manual
Black Crystal 3000 Series LCD TV
JLC32BC3000 32” Class
JLC37BC3000 37” Class
JLC42BC3000 42” Class
JLC47BC3000 47” Class
Before operating your LCD TV, please read this manual thoroughly.
Inhaltszusammenfassung zur Seite Nr. 2
Contents Welcome to the JVC family of customers. We hope that you will have many years of enjoyment from your new JVC LCD TV. To get the most out of your JVC LCD TV, read these instructions before making any adjustments, and retain them for future reference. For assistance, call the JVC Customer Support and Service Center 1-855-868-1928 or visit our website http://go.jvc.com/HDTVSupport/. We recommend that you register your JVC LCD TV either at our wesite http://go.jvc.com/HDTVSupport/or fil
Inhaltszusammenfassung zur Seite Nr. 3
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within The exclamation point within an equilateral an equilateral triangle is intended to alert the user triangle is intended to alert the user to to the presence of uninsulated dangerous voltage the presence of important operating and within the pr
Inhaltszusammenfassung zur Seite Nr. 4
Important Safety Instructions Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce he
Inhaltszusammenfassung zur Seite Nr. 5
Important Safety Instructions 22) When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner’s manual of the other equipment carefully and follow the instructions when making any connections. 23) Sudden high volume sound may cause hearing or speaker damage. When you use headphones, (if the unit is equipped with a headphone jack) keep the vol
Inhaltszusammenfassung zur Seite Nr. 6
Important Safety Instructions CONDENSATION Moisture will form in the operating section of the unit if the unit is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, unit’s performance will be impaired. To prevent this, let the unit stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually.Condensation may also form during the summer if the unit is exposed to
Inhaltszusammenfassung zur Seite Nr. 7
Important Safety Instructions Television Antenna Connection Protection External Television Antenna Grounding If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges. Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the
Inhaltszusammenfassung zur Seite Nr. 8
Important Safety Instructions DTV Transition Advisory As of June 12, 2009, all U.S. television stations have switched to digital broadcasting. As a result, owners of analog television sets must connect a digital-to-analog converter box to the television set or subscribe to cable or satellite TV to receive over-the-air TV. Analog-only TVs continue to work as before to receive low power, Class A or translator television stations and with cable and satellite TV services, gaming consoles, VCRs,
Inhaltszusammenfassung zur Seite Nr. 9
Contents Adjusting the Menu Settings ...................26 Important Safety Instructions ....................3 Quick Menu Operation ........................................26 Television Antenna Connection Protection ... 6 Input Menu ..............................................................27 DTV Transition Advisory ........................................ 7 Picture Menu ...........................................................27 Attaching the Stand ..................................10 Pic
Inhaltszusammenfassung zur Seite Nr. 10
Contents Select Antenna / Cable ..................................34 Scan Channels ...................................................34 Add Channel ......................................................35 Delete Channel .................................................35 Sleep Timer ..............................................................35 Appendix ...................................................36 Supported Input Source for PIP/POP .............36 Supported Resolution ...............
Inhaltszusammenfassung zur Seite Nr. 11
Attaching the Stand The stand installation varies depending on 3 Connect the base to the stand. model. Perform the installation according to the instructions of your TV model. Unpacking the TV 1 Remove the remote control, power cord, and other accessories from the foam end caps. 2 Remove the top foam caps. 3 Remove the stand. 4 Secure the base to the stand with a 4 Remove the TV from the box. thumbscrew. 5 Place the TV face down on a flat and clean surface. 6 Attach the sta
Inhaltszusammenfassung zur Seite Nr. 12
Attaching the Stand JLC37BC3000 & JLC42BC3000 JLC47BC3000 1 Connect the base to the stand. 1 Align the bottom four screw holes with the neck and stand, and secure with the provided four screws and screwdriver. 3 Attach the neck cover firmly until it locks 2 Secure the base with the thumbscrew. into place. Removing the Stand When the TV needs to be transported, remove the stand and pack the TV back in the carton. To remove the stand, perform the assemble steps in reverse order accor
Inhaltszusammenfassung zur Seite Nr. 13
O W F I D N I E Quick Start Guide A U U N D Package Contents Check if the following items are included in your package. Remote Control Batteries LCD TV SLEEP MEDIA OK VOL CH MUTE 1 2 3 4 5 6 7 8 9 _ 0 ENT HDMI PC TV VIDEO COMP MUSIC Quick Start Guide User Manual Power Cord Remote Control Batteries 1 Push the tab, then lift to open the cover. 3 Close the battery cover. 2 Insert the batteries, making sure the [+] and [-] polarities are correct. Battery Precautions: Be sure to follow the co
Inhaltszusammenfassung zur Seite Nr. 14
Parts and Functions Front and Side Views POWER button MENU MENU button CH Channel Up / Down button CH VOL + Volume Up / Down button _ VOL INPUT INPUT button Remote control sensor Power indicator • Standby / Power OFF: Red USB port • Power ON: White HDMI Side (For JLC42BC3000 & JLC47BC3000 only) Rear View VESA mounting holes HDMI CABLE / ANTENNA DTV / TV 1 PC / MUSIC VIDEOAUDIO OUT AC IN PC AUDIO / MUSIC VIDEO AUDIO L R 2 OPTICAL Y Pb/Cb Pr/Cr AUDIO 3 L R L R AC INPUT LR AUDIO COMPONENT Compo
Inhaltszusammenfassung zur Seite Nr. 15
O W F I D N I E A U U N D Parts and Functions Remote Control 1 IR Transmitter: Sends remote control signal to the TV. 2 SLEEP button: Select a sleep mode timer (Off, 1 12 30 minutes, 60 minutes, 90 minutes, 120 minutes, 2 13 180 minutes). SLEEP 3 Playback controls: The buttons are used for 3 Photo, Music, Video, and HDMI CEC function. MEDIA 14 4 INPUT button: Change the input device. 15 5 WIDE button: Change the display mode 4 (Normal, Wide, Zoom Panoramic). 16 6 MUTE button: Tu
Inhaltszusammenfassung zur Seite Nr. 16
Making Connections Connecting Antenna / Cable Connect the 75 ohm coaxial cable directly to the DTV/TV Cable/Antenna jack of the TV. DTV / TV CABLE / ANTENNA 75 ohm coaxial cable Connecting HD Devices You can connect different devices to the TV using HDMI, DVI, Composite, or Component connections. Check the type of connection available on your device. Via HDMI HDMI connection transmits both digital video and audio signals from an HDMI device to the TV. Game Console / Blu-ray Player / Cable Box /
Inhaltszusammenfassung zur Seite Nr. 17
Making Connections Via Component Connection Audio cable TV DVD Player / Cable Box / Satellite AUDIO Y Pb/Cb Pr/Cr L R Audio IN Audio OUT R AUDIO COMPONENT L Video IN Pr/Cr Pb/Cb Video OUT Y Component cable Note: The component cable and audio cable are not supplied with the TV. Check your device package contents or contact your retailer to purchase. Via Composite Connection TV VCR / Camcorder / Game Console VIDEO VIDEO AUDIO Audio OUT Audio IN L R R AUDIO L VIDEO Video IN Video OUT Video cable
Inhaltszusammenfassung zur Seite Nr. 18
Making Connections Connecting External Speakers / Soundbar / AV Receivers Digital Connection Connect the SPDIF/Optical audio cable to the Audio OUT optical port of the TV and the optical port of the soundbar, AV receiver, or audio system. Digital Audio System TV AUDIO OUT Audio OUT Audio IN OPTICAL OPTICAL Optical audio cable Note: • The optical audio cable is not supplied with the TV. Check your device package contents or contact your retailer to purchase. Analog Connection Connect the RCA
Inhaltszusammenfassung zur Seite Nr. 19
Making Connections Connecting Computers and Laptops 1 Connect one end of a VGA cable to the PC port of the TV. 2 Connect the other end of the VGA cable to the RGB port of the computer or laptop. 3 For PC audio, connect a 3.5mm audio cable to the PC audio port of the TV and audio out port of the computer or laptop. Computer / Laptop PC audio cable TV PC / MUSIC Audio out PC AUDIO / MUSIC Audio IN Audio OUT VGA Video IN Video OUT VGA cable Note: • The VGA cable and the PC audio cable are
Inhaltszusammenfassung zur Seite Nr. 20
Basic Operations 4 Press or to select the Time Zone, then press Setup Wizard OK. When the TV is turned on for the first time, the Setup Wizard appears to assist you in setting up your TV. Time Zone Note: Make sure that the antenna or cable TV system Select the Time Zone is connected before proceeding. Time Zone: Alaska 1 Turn on the TV. The Setup Wizard screen appears. 2 Press or to select the menu language, then OK RETURN INFO Change Select Previous Setup Exit press OK. 5
