Inhaltszusammenfassung zur Seite Nr. 1
ENGLISH
WIDE LCD PANEL TV
INSTRUCTIONS
Contents
PREPARATION
Safety precautions ................................... 2
Remote control buttons and functions ..... 3
Set up and connections ........................... 4
Initial settings ........................................... 6
Registering / Editing channels ................. 7
Channel Summary ................................... 8
Operating the menus ............................... 9
FUNCTIONS
Picture setting ...................................
Inhaltszusammenfassung zur Seite Nr. 2
Safety precautions Thank you for buying this JVC LCD panel television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. • Follow this manual regarding setup! • Place the TV set in a neat and dry place. Do not place the product close to - Connect only to a 110-240 V, 50/60Hz AC outlet. source of steam, heat, moisture or oil. Because it may cause a fi re hazard • Make enough room for inserting and removing the power plug! or electric shock
Inhaltszusammenfassung zur Seite Nr. 3
Remote control buttons and functions 1 9 15 Power On / Off Operate the menu Change channel / Page / Hyper Scan 20 1 2 Colour buttons 10 To previous screen 16 Channel information 3 Turn on "Clear SD" 11 Turn on "Sound Meister" 17 Select the input Source (P.20) 4 12 18 Turn on "Zoom" Volume control / Turn off muting Return Plus / Return function 2 Clear SD 5 Turn on "Eco Sensor" 13 Function for viewing Teletext and 19 Change channel / Page 2 3 1 3 6 Turn on "Karaoke" 20 Turn the volume off / on
Inhaltszusammenfassung zur Seite Nr. 4
Set up and connections Connect an aerial and VCR / DVD Player TV/VIDEO Select the input Source (P. 20) MENU/OK Display on-screen menu / set AERIAL CHANNEL Change channel / Page / R L V VIDEO-2 Hyper Scan Function (P. 3) VOLUME Volume / Adjust Power lamp ON : Lit (Blue) OR Power On / Off OFF : Unlit Power lamp lights while • After all the connections have the TV is on. Microphone been made, insert the plug into • "Power Lamp" (P. 15) Remote control sensor / an AC outlet. VCR (DVD Player) E
Inhaltszusammenfassung zur Seite Nr. 5
Set up and connections (continued) You can connect many different devices to the rear panel of the TV. VIDEO-1 Watching videos Please read the user manuals of each device before setup. Output Input (Connecting cables are not supplied with this TV.) • Composite signal / TM Component signal HDMI Connector. (P. 24) • Sound L / R Microphone • Use Component signal HDMI-1 HDMI-2 HDMI-3 DIGITAL VIDEO/AUDIO "Video - 1 Setting" (P. 20) VIDEO-2 Watching videos To "HDMI-1" To "HDMI-3" Outpu
Inhaltszusammenfassung zur Seite Nr. 6
Initial Settings 1 Turn on the TV. 2 Select a language. 3 Select Country Area. Set Up 1. Select OK 1. Select > Language Set Up English Укрa їнcькa > Country Area OK Castellano OK Area - 1 Français Melayu Area - 2 P уccкий 2. Set 2. Set Português JVC logo appears Ti ếng Vi ệt • Show only when powering on for the fi rst time. Area-1 : Asia, Middle East, Europe, Oceania, Africa • The power on the unit can also be used. Area-2 : South America, Philippines • The select the new Country Area after Ini
Inhaltszusammenfassung zur Seite Nr. 7
Registering / Editing channels This function is available when select Country Area to "Area-1" only. You can edit the channel list or register new channel manually. Set Up Select a channel > Edit PR ID CH/CC 01 CH 02 02 CH 03 OK 03 CH 07 04 CH 76 05 CH 12 06 CH 09 07 CH 05 08 CH 02 09 CH 15 10 CH 28 Move Move a channel position. Insert / Delete Insert / Delete a channel 1. Select a 2. Enter a Set Up 1. Start Set Up > Edit CH/CC number 0-9 > Edit PR ID CH/CC (Green) PR ID CH/CC
Inhaltszusammenfassung zur Seite Nr. 8
Channel Summary This function is available when select Country Area to "Area-2" only. You can edit the channel list. Set Up > Channel Summary Select a channel CH/CC ID Skip CH 02 CH 03 CH 04 OK CH 05 CH 06 CH 07 CH 08 CH 09 CH 10 CH 11 Skip Skip the channel. ID Edit a channel name. (Yellow) Set Up (Red) > Channel Summary CH/CC ID Skip CH 02 Yes CH 03 Yes CH 04 Yes CH 05 Yes CH 06 Yes 1. Select the character CH 07 Yes Set Up CH 08 Yes > Channel Summary CH 09 Yes CH/CC ID Skip 2. M
Inhaltszusammenfassung zur Seite Nr. 9
Operating the menus You can select the Country Area between Area-1 and Area-2. See in item 3 of "Initial setting" (P. 6) See the menus location in the below table. Set Country Area to "Area-1" Set Country Area to "Area-2" Top Menu 2nd Menu Page Top Menu 2nd Menu Page Picture Picture Mode 10 Picture Picture Mode 10 Backlight 10 Backlight 10 Contrast 10 Picture 10 Brightness 10 Brightness 10 Sharpness 10 Detail 10 Colour 10 Color 10 Tint 10 Tint 10 White Balance 10 White Balance 10 Features 11 Fea
Inhaltszusammenfassung zur Seite Nr. 10
Picture setting 1. Display "Picture" menu 2. Select item and setting or adjust • To enter an items menu 1. Select 1. Select Picture Picture Picture Mode Bright Picture Mode Bright MENU 2. Adjust Backlight Backlight Contrast Contrast OK OK OK Brightness Brightness Sharpness Sharpness Colour Colour 3. Finish 2. Enter Enter Tint Tint White Balance Warm White Balance Warm Features Features You can select a preset picture setting according to your favour. Bright : Hightens contrast and
Inhaltszusammenfassung zur Seite Nr. 11
Picture setting (continued) Finer Picture adjustment Picture > Features Clear SD Off Digital VNR Off DigiPure Off Pull Down Off Colour Management Off Picture Management Off Smart Picture Off Dynamic Backlight Off MPEG Noise Reduction Off Colour System Zoom : For clearly picture (Off / Mode-1 / Mode-2) Clear SD When Clear SD set to Mode-1 or Mode-2, then Digital VNR, DigiPure, Picture Management and MPEG Noise Reduction cannot operate. Digital VNR : Reduce the amount of noise in original pi
Inhaltszusammenfassung zur Seite Nr. 12
Sound setting 1. Display "Sound" menu. 2. Select item and setting or adjust. • Set Country Area to "Area-1" • Set Country Area to "Area-2" Sound Sound Sound 1. Select Stereo / I ▪II O Mono Stereo / I ▪II I II Mono MTS Stereo SAP Mono MENU Sound Meister Dynamic Sound Meister Dynamic On Air 2. Adjust Treble Treble Sound Meister Dynamic Bass Bass Treble Surround OK Surround Bass OK Balance Balance Surround Voice Enhancer Off Balance Voice Enhancer Off AI Volume On A
Inhaltszusammenfassung zur Seite Nr. 13
Sound setting (continued) Chooses to connect subwoofer. (Off / On) Subwoofer Out • Subwoofer to be used must have a built-in amplifi er. Adjusts sound level of your subwoofer. (Lower ↔ Louder) Subwoofer Level • When Subwoofer Out set to On, you can adjust Subwoofer Level. You can enjoy to reduce the vocals for your own karaoke. KARAOKE Karaoke Karaoke Off Main Volume Microphone Volume Karaoke Chooses to reduce the vocals. Off : Normal sound of song Mode-1 : Only sound of music Karaoke Mode-
Inhaltszusammenfassung zur Seite Nr. 14
Useful functions 1. Display "Features" menu. 2. Select item and setting or adjust. • To enter an items menu Features Features 1. Select 1. Select On Timer On Timer MENU Sleep Timer Sleep Timer 2. Adjust Calendar Calendar Channel Guard Channel Guard OK OK Blue Back Off Blue Back Off OK Child Lock Off Child Lock Off Auto Shutoff Off Auto Shutoff Off 2. Enter 3. Finish Favourite Setting Enter Favourite Setting Power Lamp On Power Lamp On Eco Sensor On Eco Sensor On 1. Select PR channel th
Inhaltszusammenfassung zur Seite Nr. 15
Useful functions (continued) Blue Back Display a blue screen and mute the sound when the signal is weak or absent. (Off / On) Child Lock Disables the side control buttons of the TV. (Off / On) Auto Shutoff Set the power to turn off if no signal is received and no operation is performed for about 15 minute. (Off / On) Delete the favourite channel that you registered. Favourite Setting 1. Select Features Features (Blue) > Favourite Setting > Favourite Setting 1 OK 1 PR 32 PR 01 2 2 PR 05 3 PR 07 3
Inhaltszusammenfassung zur Seite Nr. 16
Multi Media Input Allows you to enjoy pictures, musics, movies and text fi les stored on your USB device or SD card you have connected to the terminal of the TV. Cautions - Insert or remove SD cards and USB devices gently and in the right direction. Otherwise, the devices or the TV may be damaged. - It is recommended to keep a backup of your fi les. - Do not connect a mouse, keyboard or the like. - Do not use a USB hub or extension cable. 1 Insert an SD card / USB device into the SD card slot /
Inhaltszusammenfassung zur Seite Nr. 17
Multi Media Input (continued) SELECT MEDIA - Some fi les may be displayed with bands around the edges. 1. Select 4 PHOTO MUSIC MOVIE TEXT FILE - To see the next / previous fi le, press / . OK - To exit the full-screen display and show the folder index, press . 2. Set - The thumbnails of some fi les may not be shown. - This TV can only display fi le names as alphabetical letters. PHOTO View picture from your USB device or SD card. - Photographs with large fi le-sizes may take a while to be displayed.
Inhaltszusammenfassung zur Seite Nr. 18
Multi Media Input (continued) MOVIE Copy (fi le) Delete (fi le) 5.3 MOVIE D:/VIDEO_TS/ Abc File name : Abc 1. Move the highlight bar to the fi le 1. Move the highlight bar to the fi le Xyz File size : 229MB Pop File type : Div that you want to copy. you want to delete. 2. Press right arrow button, then 2. Press right arrow button, then - When the movie fi le is selected the highlight bar, the detail of that a remark will be showed on the a remark will be showed on the movie will be shown inside t
Inhaltszusammenfassung zur Seite Nr. 19
V iewing Teletext Viewing Closed Caption This function is available when select Country Area to "Area-1" only. This TV can display TV broadcasts and Teletext on the same channel in 1. Select "Set Up". two windows. When watching TV TV TEXT TEXT TEXT--- TEXT--- 1. MENU TEXT--- TEXT--- Set Up Auto Program Channel Summary Language OK Video-1 Setting Component Rocket Sart On HDMI Setting 2. Select a Teletext page by press number button (0-9). Enter PC Setting CH Closed Caption • Move up or do
Inhaltszusammenfassung zur Seite Nr. 20
W atching Video or DVDs Technical information Select the input Source. Connect "DVI" devices AV Select 1. Select TV/VIDEO 011 1 SD / USB Connect a "DVI" device to "HDMI" using "DVI-HDMI" conversion cable. 2 HDMI I 1 OK 3 HDMI I 2 4 HDMI I 3 Connect analogue sound output of the DVI device to L and R terminals in 5 Video - 1 2. Set 6 Video - 2 HDMI-1. 7PC • Set "Audio" in "HDMI Setting" to "Analogue" or "Auto". • Operate the connected device and play video. • HDMI-2 and HDMI-3 input does not su
