Inhaltszusammenfassung zur Seite Nr. 1
5 in 1 portable power pack
Model 96157
operation instructions
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
Distributed exclusively by Harbor Freight Tools .
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SaVe THiS manual.
© ®
Copyrigh
Inhaltszusammenfassung zur Seite Nr. 2
speciFications Case Thermoplastic housing with mold-over armored rubber Battery 12V/18Ah Lead-acid Battery Cables 36” Long 6AWG gauge coated copper wire Power Output Two 115VAC outlets Outlet Socket Two 12 VDC Input Port AC-DC Charging Ports with Adapters Weight 19.6 Pounds 600 Amp Crank, 1000 Amp Surge Jumpstart Push-button Battery Test 5 L.E.D. Work Light, Other Features DC Volts Gauge, 1.75” Dia. 12V 260 PSI Compressor w/ 24” L. Hose & Gauge 3 Air Nozzle Adapters Push-in Fuse for Cooling
Inhaltszusammenfassung zur Seite Nr. 3
4. avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded. 5. Do not expose the power pack to rain or wet conditions. Water entering the Power Pack will increase the risk of electric shock. 6. stay alert. Watch what you are doing, and use common sense when operating the Power Pack. Do not use the Power Pack while tired or under the influence of drugs, alcohol, or medication. A
Inhaltszusammenfassung zur Seite Nr. 4
18. For emergency use only. Do not use this system in the place of a vehicle battery. Only use to jump start the vehicle. 19. lead acid batteries generate additional hydrogen gas when charging. Hydro- gen gas is explosive. Only use the Jump-start System in a well-ventilated area. Do not allow smoking in the area. 20. never exceed the maximum charging time of the power pack. Maximum AC charge time is 48 hours. Maximum DC charge time is 24 hours. ser Vice 1. Tool service must be perfo
Inhaltszusammenfassung zur Seite Nr. 5
AC Adapter (30) DC Adapter (31) 3. t o charge from an ac power source . After the initial charge, use only the AC Adapter (30) provided with the unit. Plug first into any standard 120V socket, and then into Power Pack. Allow up to 34 hours for the unit to fully charge. The pack must not be continually charged for over 34 hours at a time. 4. When the Power Pack is fully charged, unplug from the 120V socket and unit. Do not exceed the maximum ac charge time of 34 hours. 5. t o charge from
Inhaltszusammenfassung zur Seite Nr. 6
4. Connect the black Negative Battery Clamp (28) to a non-moving metal part of the vehicle. Do not connect to t He ne Gati Ve ter Minal o F t He batter Y. 5. The Connection Indicator Light (17) will glow green if a correct connection has been made. If the Connection Indicator Light turns red, review, and change the connections. 6. When the correct connection has been made, turn the Jump-start Power Switch (18) to the “ON” position. 7. Start vehicle. If vehicle does not start, wait a
Inhaltszusammenfassung zur Seite Nr. 7
Fan Turn the Inverter/Fan Switch (26) to the “ON” position, turn off when finished. 12 Volt Dc 1. Remove the 12V DC Socket Cover (11, 12) and plug in a 12 Volt accessory. 2. Monitor voltage use, so that the Power Pack does not run out of power. battery Disposal 1. Disposal: The Power Pack uses a lead-acid battery. Do not attempt to replace battery. Remove all screws from case and open. Disposing of Power Pack must comply with the standards for hazardous waste disposal in your area. Con
Inhaltszusammenfassung zur Seite Nr. 8
troublesHootinG SKU 96157 For technical questions, please call 1-800-444-3353. Page 8
Inhaltszusammenfassung zur Seite Nr. 9
liMiteD 90 D aY warrantY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durabil- ity standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facili- ties, criminal activity, improper installa
Inhaltszusammenfassung zur Seite Nr. 10
asseMbl Y DiaGraM REV 08a SKU 96157 For technical questions, please call 1-800-444-3353. Page 10
