Inhaltszusammenfassung zur Seite Nr. 1
ENGLISH
OWNER’S MANUAL
LED LCD MONITOR
Please read this manual carefully before operating
your set and retain it for future reference.
LED LCD MONITOR MODELS
E1951S E1951T E2251VR E2251VQ
E2051S E2051T E2351VR E2351VQ
E2251S E2251T
E2351T
www.lg.com
Inhaltszusammenfassung zur Seite Nr. 2
ENGLISH ENG TABLE OF CONTENTS 2 Contents 3 AsseMBLInG AnD PRePAR- 28 PRoPeR PostURe InG 28 Proper posture for using the Monitor set. 3 Unpacking 4 Parts and buttons 29 LICenses 6 Setting Up the Monitor set 6 - Attaching the Stand Base 6 - Detaching the stand base 7 - Detaching the Stand Body (Using the Wall mount) 7 - Mounting on a table 8 - Mounting on a wall 10 UsInG tHe MonItoR set 10 Connecting to a PC 10 - D-SUB connection 11 - DVI to HDMI connection 12 - HDMI connection 13 CUstoMIZInG set
Inhaltszusammenfassung zur Seite Nr. 3
ENGLISH ENG ASSEMBLING AND PREPARING 3 AsseMBLInG AnD PRePARInG Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. DVI-D Cable CD(owner's Manual) / D-sUB Cable (E1951T/E2051T/E2251T/E2351T/ Card (This signal cable may be attached E2251VR/E2351VR/E2251VQ/ to this product before shipping out.) E2351VQ) (This
Inhaltszusammenfassung zur Seite Nr. 4
ENGLISH ENG ASSEMBLING AND PREPARING 4 Parts and buttons Power Indicator y Lighting on: t urned on y Lighting o ff: t urned off (Power Button) Button ("CUSTOMIZING SETTINGS" on page 13) E2251VR E2251VQ E1951S E2051S E2251S E2351VR E2351VQ E1951T E2051T E2251T E2351T Connection panel (See p.10)
Inhaltszusammenfassung zur Seite Nr. 5
ENGLISH ENG ASSEMBLING AND PREPARING 5 Button Description MENU Accesses the main menus.(See p.14) Left First Button osD LoCKeD/ This function allows you to lock the current control settings, so UnLoCKeD that they cannot be inadvertently changed. Press and hold the Left First Button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the Left First Button for several seconds. The message "OSD UNLOCKED" should appear. SUPER+ RESO
Inhaltszusammenfassung zur Seite Nr. 6
ENGLISH ENG ASSEMBLING AND PREPARING 6 Using a coin, turn the screw clockwise to se- 4 setting Up the Monitor set cure the stand base. Attaching the stand Base Place the monitor's screen face down. 1 CAUtIon To protect the screen from scratches, cover y the surface with a soft cloth. Put the stand Body on the set and use the 2 screws to fix. stand Base Detaching the stand base Place the monitor's screen face down. 1 To protect the screen from scratches, cover the surface with a soft clot
Inhaltszusammenfassung zur Seite Nr. 7
ENGLISH ENG ASSEMBLING AND PREPARING 7 2 Connect the AC-DC Adapter and Power Cord Detaching the stand Body (Using to a wall outlet. the Wall mount) 1 Remove 2 screws and detach the Stand Body. Press Power button on the front switch of panel 3 to turn the power on. CAUtIon Mounting on a table Disconnect the power cord first, and then move Lift and tilt the Monitor set into its upright 1 or install the Monitor set. Otherwise electric position on a table. shock may occur. Leave a 10 cm (minim
Inhaltszusammenfassung zur Seite Nr. 8
ENGLISH ENG ASSEMBLING AND PREPARING 8 manual supplied with the Kensington security WARnInG system or visit http://www.kensington.com. When you adjust the angle, do not hold the Connect the Kensington security system cable bottom of the Monitor set frame as shown on between the Monitor set and a table. the following illustration, as it may injure your fingers. Do not touch or press the screen when adjusting the angle of the monitor. note The Kensington security system is optional. You can
Inhaltszusammenfassung zur Seite Nr. 9
ENGLISH ENG ASSEMBLING AND PREPARING 9 If you intend to mount the Monitor set to a wall, an y VESA (A x B) optional third-party wall mount must be purchased. When you install the Monitor set using the wall mounting interface (optional parts), attach it A carefully so it will not fall. B Please use screws and a wall mount interface 1 in accordance with VESA Standards. 2 If you use screws longer than standard, the monitor might be damaged internally. If you use improper screws, the produc
Inhaltszusammenfassung zur Seite Nr. 10
ENGLISH ENG USING THE MONITOR SET 10 UsInG tHe MonItoR set Connecting to a PC E2251VR E2351VR E2251VQ E2351VQ Your Monitor set supports Plug & Play*. y *Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention. D-sUB connection Transmits analog video from your PC to the Monitor set. Connect the PC and the Monitor set with the supplied D-sub 15 pin signal cable as shown in the following illustrations. E1951S
Inhaltszusammenfassung zur Seite Nr. 11
ENGLISH ENG USING THE MONITOR SET 11 DVI to HDMI connection CAUtIon Transmits the digital video signal from your PC to the Monitor set. Connect the PC and the Monitor y Connect the signal set with the DVI to HDMI cable as shown the input cable and tighten following illustrations. it by turning the screws clockwise. E1951T E2051T E2251T E2351T y Do not press the screen with your finger for a long time as this may result in temporary distortion on the screen. y Avoid displaying a fixed imag
Inhaltszusammenfassung zur Seite Nr. 12
ENGLISH ENG USING THE MONITOR SET 12 Self Image Setting Function HDMI connection Press the power button on the front panel to turn Transmits the digital video and audio signals from the power on. When monitor power is turned on, your PC or A/V to the Monitor set. Connect the PC the "self Image setting" Function is executed or A/V and the Monitor set with the HDMI cable automatically. (Only supported in Analog Mode) as shown in the following illustrations. When the HDMI cable is connected
Inhaltszusammenfassung zur Seite Nr. 13
ENGLISH ENG CUSTOMIZING SETTINGS 13 CUstoMIZInG settInGs Accessing the Main Menus Press any button on the front of the Monitor set to display the MonItoR setUP OSD menu. 1 Press the desired menu item. 2 3 Change the value of the menu item by pressing the buttons on the front of the Monitor set. To return to the upper menu or set other menu items, use the up arrow ( ) button. Select eXIt to leave the OSD menu. 4 Monitor set Buttons MenU (See p.14) AUto (See p.5) eXIt Sets the screen options. O
Inhaltszusammenfassung zur Seite Nr. 14
ENGLISH ENG CUSTOMIZING SETTINGS 14 Customizing settings Menu settings MENU BRIGHTNESS 100 Press any button on the front of the Monitor set to display the 1 ORIGINAL RATIO WIDE MonItoR setUP OSD menu. PRESET COLOR TEMP WARM PRESET Press the MenU button to display the options in the OSD 2 50 RED menu. 50 GREEN BLUE 50 3 Set the options by pressing th e ◄ or ► or ▼ buttons. 70 CONTRAST BLACK LEVEL LOW Select eXIt to leave the OSD menu. 4 LANGUAGE ENGLISH To return to the upper menu or set o
Inhaltszusammenfassung zur Seite Nr. 15
ENGLISH ENG CUSTOMIZING SETTINGS 15 sUPeR eneRGY sAVInG settings SUPER ENERGY SAVING Press any button on the front of the Monitor set to 1 display the MonItoR setUP OSD menu. ON OFF RESET 2 Press the MenU button to display the options in the OSD Menu. SUPER SAVING TOTAL POWER REDUCTION: 20 W : 5 W/h Select sUPeR eneRGY sAVInG by pressing the LED SAVING TOTAL CO2 REDUCTION: 16 g 3 : 12 W/h ▼ button. Enter to sUPeR eneRGY sAVInG by pressing the 4 OK EXIT ► button. 5
Inhaltszusammenfassung zur Seite Nr. 16
ENGLISH ENG CUSTOMIZING SETTINGS 16 SUPER+ RESOLUTION sUPeR+ ResoLUtIon settings 1 Press any button on the front of the Monitor set to display the MonItoR setUP OSD menu. NORMAL LOW MEDIUM HIGH Press the sUPeR+ ResoLUtIon button to display 2 the options in the OSD menu. EXIT Set the options by pressing ◄ or ► buttons. 3 4 Select eXIt to leave the OSD menu. To return to the upper menu or set other menu items, OK EXIT use the up arrow ( ) button. The available SUPER+ RESOLUTION settings are
Inhaltszusammenfassung zur Seite Nr. 17
ENGLISH ENG CUSTOMIZING SETTINGS 17 DUAL PACKAGE DUAL MONITOR ► DUAL MonItoR settings 1 Press any button on the front of the Monitor set to display the MonItoR setUP OSD menu. Press the DUAL button to display the options in the OSD menu. 2 OFF EXTENDED CLONE Set the options by pressing ▼ and then ◄ and ► buttons. 3 EXIT 4 Select eXIt to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. The available DUAL MONITOR settings are describe
Inhaltszusammenfassung zur Seite Nr. 18
ENGLISH ENG TROUBLESHOOTING 18 tRoUBLesHootInG Check the following before calling for service. no image appears Is the power cord of the display y Check and see if the power cord is connected properly to the power connected? outlet. Is the power indicator light on? y Press the Power button. Is the power indicator red? y If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. y Try to turn on the PC. Do you see an "OUT OF RANGE"
Inhaltszusammenfassung zur Seite Nr. 19
ENGLISH ENG TROUBLESHOOTING 19 Display image is incorrect The screen color is mono or y Check if the signal cable is properly connected and use a screwdriver abnormal. to fasten if necessary. y Make sure the video card is properly inserted in the slot. y Set the color setting higher than 24 bits (true color) at Control Panel ► settings. The screen blinks. y Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. Do you see an "Unrecognized monitor, Plu
Inhaltszusammenfassung zur Seite Nr. 20
ENGLISH ENG SPECIFICATIONS 20 sPeCIFICA tIons E1951S E1951T Display screen t ype 47.0 cm (18.5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size: 47.0 cm Pixel Pitch 0.3 mm x 0.3 mm (Pixel Pitch) sync Input Horizontal Frequency 30 kHz to 61 kHz (Automatic) Vertical Frequency 56Hz to 75Hz (Automatic) Input Form e1951s Separate Sync. e1951t Separate Sync. Digital Video Input signal Input e1951s 15 pin D-SUB Connector e1951t 15 pin D-SUB Connector /DVI-D Connector (Di
