Inhaltszusammenfassung zur Seite Nr. 1
Operating Instructions
Progressive Wide Hospitality Plasma Display
Model No.
TH-37PG9W
TH-42PG9W
The illustration shown is an image.
Please read these instructions before operating your set and retain them for future reference.
English
TQBC2112
Inhaltszusammenfassung zur Seite Nr. 2
Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new Plasma Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt also, and note down the model number and serial number of your set in the space provided on the rear cover of these instructions. Visit our Panasonic Web Site http://p
Inhaltszusammenfassung zur Seite Nr. 3
Important Safety Notice WARNING 1) To prevent damage which may result in fire or shock hazard, do not expose this appliance to dripping or splashing. Do not place containers with water (flower vase, cups, cosmetics, etc.) above the set. (including on shelves above, etc.) No naked flame sources, such as lighted candles, should be placed on / above the set. 2) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel. 3)
Inhaltszusammenfassung zur Seite Nr. 4
Safety Precautions WARNING Setup This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury. (All of the following accessories are manufactured by Matsushita Electric Industrial Co., Ltd.) • Pedestal ............................................................... TY-ST09GR-S • Wall-hanging bracket (vertical) ............................. TY-WK42PV3W • Wall-ha
Inhaltszusammenfassung zur Seite Nr. 5
Safety Precautions When using the Plasma Display The Plasma Display is designed to operate on 220 - 240 V AC, 50/60 Hz. Do not cover the ventilation holes. • Doing so may cause the Plasma Display to overheat, which can cause fire or damage to the Plasma Display. Do not stick any foreign objects into the Plasma Display. • Do not insert any metal or flammable objects into the ventilations holes or drop them onto the Plasma Display, as doing so can cause fire or electric shock. Do not remove the
Inhaltszusammenfassung zur Seite Nr. 6
Safety Precautions CAUTION When using the Plasma Display Do not bring your hands, face or objects close to the ventilation holes of the Plasma Display. • Heated air comes out from the ventilation holes at the top of Plasma Display will be hot. Do not bring your hands or face, or objects which cannot withstand heat, close to this port, otherwise burns or deformation could result. Be sure to disconnect all cables before moving the Plasma Display. • If the Plasma Display is moved while some
Inhaltszusammenfassung zur Seite Nr. 7
Accessories Accessories Supply Check that you have the accessories and items shown Operating Instruction book Power supply cord Fixing bands × 2 The remote control is not included with this set. Available for purchase separately. Object model : EUR7636070R 7
Inhaltszusammenfassung zur Seite Nr. 8
Connections AC cord connection (see page 12) – AC cord fixing 1 Connect power plug to How to fix: How to release: the socket of the main Fix by pushing in until a Pull up while drawing in 1 body. clicking sound is heard. the knob. 2 Fix the clamper. 2 – Cable fixing bands Secure any excess cables with bands as required. Pass the attached cable To secure cables connected to Terminals, wrap the cable fixing band around them fixing band through the then pass the pointed end through the lockin
Inhaltszusammenfassung zur Seite Nr. 9
Connections PC Input Terminals connection COMPUTER AUDIO PC IN Conversion adapter (if necessary) Mini D-sub 15p RGB PC cable Audio Stereo plug Connect a cable which matches the audio output terminal on the computer. Notes: • Due to space limitations, occasionally you may have trouble connecting Mini D-sub 15P cable with ferrite core to PC input Terminal. • Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning frequency of 48
Inhaltszusammenfassung zur Seite Nr. 10
Connections SERIAL Terminals connection The SERIAL terminal is used when the Plasma Display is controlled by a computer. COMPUTER 6 7 8 9 14 2 3 5 SERIAL RS-232C Straight cable Pin layout for RS-232C D-sub 9p Notes: • Use the RS-232C cable to connect the computer to the Plasma Display. • The computer shown is for example purposes only. • Additional equipment and cables shown are not supplied with this set. The SERIAL terminal conforms to the RS-232C interface specification, so that the Plasma D
Inhaltszusammenfassung zur Seite Nr. 11
Connections COMPONENT / RGB IN connection Example of input signal source RL AUDIO PR/CR/R PB/CB/B Y/G SLOT COMPONENT/RGB IN 12 3 DVD PLAYER PC IN SLOT2 SLOT3 SLOT1 Digital TV Set-Top-Box (DTV-STB) R L PR PB Y AUDIO OUT DVD(Y , PB, PR)OUT Notes: • Change the “Component / RGB-in select” setting in the “SET UP” menu to “COMPONENT”. (see page 32) • Additional equipment, cables shown are not supplied with this set. RGB signal (R, G, B) RGB Camcorder Computer or PR/CR/R PB/CB/B Y/G VIDEO IN VIDEO
Inhaltszusammenfassung zur Seite Nr. 12
Power On / Off Connecting the AC cord plug to the Plasma Display. Fix the AC cord plug securely to the Plasma Display with the clamper. (see page 8) Connecting the plug to the Wall Outlet Note: Main plug types vary between countries. The power plug shown at right may, therefore, not be the type fitted to your set. Press the Power switch on the Plasma Display to turn the set on: Power-On. Remote Control Sensor Power Indicator: Green Example: The screen below is displayed for a while after the
Inhaltszusammenfassung zur Seite Nr. 13
Initial selections Selecting the input signal Select the input signals to be connected by installing the optional Terminal Boards. Press to select the input signal to be played back from the equipment which has been connected to the Plasma Display. Input signals will change as follow: INPUT1 INPUT2 INPUT3 PC IN Notes: • Selecting is also possible by pressing the INPUT button on the unit. • Input terminal will not be selected if the terminal board is not installed into the SLOT. • Select to ma
Inhaltszusammenfassung zur Seite Nr. 14
Basic Controls INPUT button (INPUT1, INPUT2, INPUT3 Remote control sensor and PC IN selection) (see page 13) INPUT MENU ENTER/ VOL Power Indicator Volume Adjustment The Power Indicator will light. Volume Up “+” Down “–” • Power-OFF ....Indicator not illuminated (The unit When the menu screen is displayed: will still consume some power “+”: press to move the cursor up as long as the power cord is still “–”: press to move the cursor down inserted into the wall outlet.) (see page 16) • Standby
Inhaltszusammenfassung zur Seite Nr. 15
Basic Controls The remote control is not included with this set. Available for purchase separately. Object model : EUR7636070R Standby (ON / OFF) button The Plasma Display must first be plugged into the wall outlet and turned on at the power switch (see page 12). Press ON to turn the Plasma Display On, from Standby mode. Press OFF to turn the Plasma Display Off to Standby mode. R button (see page 17) Press the R button to return to previous menu screen. POSITION buttons Status button ACTION bu
Inhaltszusammenfassung zur Seite Nr. 16
On-Screen Menu Displays To Picture adjust menu The MENU button on the unit can also (see page 22) 1 Press to select. be pressed. Picture 1/2 Normalise Normal Picture Mode Normal Contrast 25 INPUT MENU ENTER/ VOL 0 Brightness 0 Colour [ from the unit ] Tint 0 Each time the MENU button is pressed, Sharpness 3 the menu screen will switch. Normal Viewing Picture Setup Picture 2/2 Sound Pos. /Size INPUT MENU ENTER/ VOL White balance Normal 1 2 Off Colour Management On Advanced settings 1 Press t
Inhaltszusammenfassung zur Seite Nr. 17
On-Screen Menu Displays [ from the unit ] 2 Press to access each adjust screen. Press the R button to return to INPUT MENU ENTER/ VOL previous menu screen. Press to return to next menu screen. To Signal screen for AV To Signal screen for To Signal screen for RGB To Signal screen for Digital (S Video) (see page 32, 33) Component (see page 33) (see page 33, 34) (see page 33, 34) Signal [ AV ] Signal [ Component ] Signal [ RGB ] Signal [ Digital ] 3D Y/C Filter (NTSC) On Cinema reality Off Sy
Inhaltszusammenfassung zur Seite Nr. 18
ASPECT Controls The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. Press repeatedly to move through the aspect options: 4 : 3 Zoom 16 : 9 [from the unit] Panasonic Auto Just The aspect mode changes each time the ENTER button is pressed. INPUT MENU ENTER/ VOL [During MULTI PIP Operations] 4 : 3 16 : 9 • Picture and Picture, Picture in Picture : • Others : Aspect switching is not possible. Notes: • For PC signal
Inhaltszusammenfassung zur Seite Nr. 19
Adjusting Pos. / Size 1 Press to display the Pos. /Size menu. Press to select H-Pos / H-Size / V-Pos / V-Size / 2 Clock Phase. Press to adjust Pos. / Size. 3 During “AV(S Video)”, “Component” and “Digital” input signal. Pos. /Size 4 Press to exit from adjust mode. Normal Normalize 0 H-Pos 0 H-Size Notes: 0 V-Pos 0 V-Size • Adjustment details are memorized separately for different input signal formats (Adjustments for component signals are memorized for 525 (480) / 60i · 60p, During “RGB / PC
Inhaltszusammenfassung zur Seite Nr. 20
MULTI PIP Press repeatedly. Each time pressing this button main picture and sub picture will be displayed as follows below. [Picture and Picture] [Picture out Picture] [Picture in Picture] Main picture Sub picture Main picture Sub picture Main picture Sub picture MULTI MULTI MULTI PIP PIP PIP Normal B A B A A Viewing B SWAP SWAP SWAP Press to swap main A B B B A picture and sub picture. A [Example] Main picture label is bright Sub picture label is bright Press to select the input mod
