Inhaltszusammenfassung zur Seite Nr. 1
About this User Manual
EN
This manual contains all information you will need to initially install and operate your new TV.
Also read the help texts which are being displayed at the bottom of the screen.
If this instruction manual does not give an answer or if ‘Troubleshooting’ does not solve your TV
problem, you can call your Local Philips Customer or Service Centre. See the supplied Worldwide
guarantee booklet.
Please, have the Model and Product number which you can find at the back or the bott
Inhaltszusammenfassung zur Seite Nr. 2
Safety warnings EN Examples of stationary images (this is not an all- General inclusive list, you may encounter others in your viewing): Do not insert the power plug in a wall socket • TV and DVD menus: listings of DVD disk content; or hang the TV to the wall before all • Black bars: when black bars appear at the left and connections are made. right side of the screen, it is recommended to change to a picture format so that the picture fills • Place or hang the TV wherever you want, but the enti
Inhaltszusammenfassung zur Seite Nr. 3
Getting started EN Before you start Warning: do not insert the mains cord into the mains at the bottom of the TV and in a wall socket or hang the TV on the wall before all connections are made. Before you switch on your TV, connect all your peripheral equipment. See To make video and audio connections, p. 39. Overview of the rear connector panel There is a wide range of audio and video equipment that can be connected to your TV. See To make audio and video connections, p. 39. Y Pb Pr G B R AUDI
Inhaltszusammenfassung zur Seite Nr. 4
Getting started (Continued) EN Overview of the side connector panel - To connect a camera, camcorder or game, see To make video and audio connections, p. 40. - To connect a headphone, see To make video and audio connections, p. 40. - To connect a USB device, see Multimedia browser, p. 33. USB Connect the antenna < Insert the aerial plug firmly into the aerial socket x at the bottom of the TV. Tip: for best quality use the suppressor cable supplied. Connect the mains < Insert the mains cord supp
Inhaltszusammenfassung zur Seite Nr. 5
Use of the remote control RC4404/01 EN B Standby Press to switch the TV from or to standby mode. When switched to standby, a red indicator on the TV lights up. Attention: the TV is never powered off completely unless it is physically unplugged. TV Press to select TV mode. DVD STB VCR AUX Press to select one of the system modes in which the remote control can be used. See Audio and Video equipment keys, p. 50. DEMO Press to switch the Demo menu on or off. a Colour keys - When functions are att
Inhaltszusammenfassung zur Seite Nr. 6
Use of the remote control RC4404/01 (continued) EN +P- Channel selection - to browse through the TV channels and sources stored and marked in the Favourite channels lists; - to select a page in Teletext mode; - to quickly browse through the lists in the menus; - to switch the TV on from standby mode. 0/9 Digit keys To select a TV channel between 0 and 999. AV Select your peripherals See Installation menu, Select your connections, p. 29. a 0 Previous channel Press to alternate between the curren
Inhaltszusammenfassung zur Seite Nr. 7
Use of the OPTION key EN The OPTION key allows you to display the Quick access menu which will give you direct access to some features and menu options. 1. Press the OPTION key. > The Quick access menu appears. 2. Press the cursor up/down to select a menu item. 3. Press the OK key to jump to the selected menu item in the TV menu. (Except for the Clock option). 4. Use the cursor keys to make a selection. 5. Press the OPTION key to exit. Note: digital related menu items will only be accessible in
Inhaltszusammenfassung zur Seite Nr. 8
Introduction: Digital TV EN Next to analogue broadcast reception, your TV has a built-in TV tuner which receives, decodes and displays digital terrestrial signals. Digital TV and radio channels are only available and reproduced: - when Digital Video Broadcasting Terrestrial (DVB-T) is applicable in your local area; - and if DVB-T signal is supported by your TV for the country you live in. See www.philips.com/support for the list of supported countries. Switch the TV on < Press the power switch B
Inhaltszusammenfassung zur Seite Nr. 9
First time installation (Continued) EN Step 1: select your on-screen language After the Welcome screen you are asked to select a language of the TV's on-screen menus.The text of the header and the info on screen continuously change language.Also the digital audio and subtitle language will be set to the selected menu language. 1. Press the cursor up/down to highlight your language. 2. Press the OK key on the remote control. 3. Follow the instructions on screen to proceed. a Step 2: complete the
Inhaltszusammenfassung zur Seite Nr. 10
First time installation (Continued) EN Step 3: Settings assistant: select your TV settings By means of several split screens/full screens you are prompted to select your preferred Picture and Sound PHILIPS Installation settings, to finally arrive at a complete setting which satisfies you. This will help you to complete the Settings assistant. 1. Press the green colour key on your remote control to enter Television the Settings assistant menu. Settings assistant 2. Select your Location with the
Inhaltszusammenfassung zur Seite Nr. 11
How to navigate through the menus EN Introduction A lot of guiding instructions, help texts and messages will be displayed on your TV when you use the menus or when you try to execute an action. Read the help texts which are being displayed on the specific item highlighted. The colour keys at the bottom of the screen refer to the different actions which may be executed. Press the corresponding colour key on the remote control to perform the required or desired action. Note: digital related menu
Inhaltszusammenfassung zur Seite Nr. 12
How to navigate through the menus (continued) EN 4. Use the cursor up/down to select a menu item. TV menu TV settings - TV settings allows you to adjust your preferred Picture Settings assistant TV settings and Sound settings Reset to standard - Features allows you to control the settings of special TV Features features Picture Installation - Installation allows you Sound Exit - to select your language preferences; - to search for and store your TV channels; - to set or adjust various special f
Inhaltszusammenfassung zur Seite Nr. 13
Use of the TV menu settings (continued) EN A. Change settings in an easy-to-use manner with the Settings assistant. Each time you've made a selection, press the green key to confirm your selection. 1. Select Settings assistant and press the cursor right. > By means of several split screens/full screens you are prompted to select your preferred Picture and Sound settings to finally arrive at a complete setting which satisfies you. See First time installation, Step 3: Settings assistant: select y
Inhaltszusammenfassung zur Seite Nr. 14
Adjust picture menu settings EN The picture menu contains the settings that affect the quality of TV menu TV settings the picture. Settings assistant TV settings Reset to standard 1. Press the MENU/BROWSE key on the remote control. Features > The main menu appears. Picture Installation 2. Select TV menu and press the cursor right. Sound Exit > The TV menu is moved to the left. 3. Select TV settings and press the cursor right. > The TV settings menu is moved to the left panel. 4. Select Picture a
Inhaltszusammenfassung zur Seite Nr. 15
Adjust picture menu settings (Continued) EN Custom tint (only when Tint is set to Custom) TV menu Fine tunes the white point (WP) and black level (BL) of the TV settings Picture picture. ............. Settings assistant 1. Select Custom tint and press the cursor right. Custom tint Reset to standard 2. Use the cursor keys to select and adjust the settings of: Pixel Plus R-WP: allows you to customise the colour tint by adjusting Picture the red whitepoint of the picture. Digital Natural Mo.. Sou
Inhaltszusammenfassung zur Seite Nr. 16
Adjust picture menu settings (Continued) EN MPEG artefact reduction TV menu MPEG artefact reduction On smoothens the TV settings Picture transitions on digital content. ............. Settings assistant < Select On or Off. DNR Reset to standard MPEG artefact red. Picture Colour enhancement Colour enhancem.. Sound Automatically controls green enhancement and blue Active control stretch. It makes the colours more vivid. < Select Off, Minimum, Medium or Maximum. Picture format Active control The TV
Inhaltszusammenfassung zur Seite Nr. 17
Adjust sound menu settings EN The sound menu contains the settings that affect the quality of TV menu the sound. TV settings Sound Equalizer Settings assistant 1. Press the MENU/BROWSE key on the remote control. Volume > The main menu appears. Reset to standard 2. Select TV menu and press the cursor right. Balance Picture > The TV Menu is moved to the left. Digital audio lang.. Sound 3. Select TV settings and press the cursor right. Dual I/II > The TV settings menu is moved to the left panel. M
Inhaltszusammenfassung zur Seite Nr. 18
Adjust sound menu settings (Continued) EN Dual I/II TV menu Allows you to select, per channel, Dual I or II, when dual TV settings Sound sound transmission is available. ............. Settings assistant Mono/Stereo Reset to standard Mono/Stereo Surround mode Picture Allows you to select, per TV channel, Mono or Stereo Headphone volume Sound sound when stereo broadcasts are available. AVL Surround mode Delta volume Allows you to select the modes for more spatial or Auto surround surround sound
Inhaltszusammenfassung zur Seite Nr. 19
Adjust feature menu settings EN The Features menu allows you to control the settings of special TV functions, features and accessory equipments. TV menu Features 1. Press the MENU/BROWSE key on the remote control. TV settings Subtitle > The main menu appears. Features Digital subtitle lan.. 2. Select TV menu and press the cursor right. Installation Sleeptimer > The TV Menu is moved to the left. Exit Childlock 3. Select Features and press the cursor right. > The Features menu is moved to the left
Inhaltszusammenfassung zur Seite Nr. 20
Adjust feature menu settings (Continued) EN Sleeptimer This sets a time period after which the TV automatically TV menu Features switches to standby. 1. Select Sleeptimer. TV settings ............. 2. Press the cursor right. Features Sleeptimer 3. Select a value with the cursor up/down. Installation Childlock > The list will have values from 0 to 180 minutes.When 0 Exit Set/Change code is selected, the sleeptimer is switched off. On timer Note: you can always switch off your TV earlier or selec
