Inhaltszusammenfassung zur Seite Nr. 1
Professional PDP
Display
(PLASMA DISPLAY PANEL)
PPM50M7F/PPM63M7F
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
Picture In Picture (PIP)
Energy Saving
SRS TruSurround XT
Digital Natural Image engine
Register your product at www.samsung.com/global/register
Record your Model and Serial number here for future reference.
▪ Model _______________ ▪ Serial No. _______________
BN68-01364A-02Eng_1009.indd 1
Inhaltszusammenfassung zur Seite Nr. 2
User Instructions Screen Image retention Do not display a still image (such as on a video game or when hooking up a PC to this PDP Display) on the plasma PDP Display panel for more than 2 hours as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. Height The PDP Display can normally operate only under 2000m(6562 feet) in height. I
Inhaltszusammenfassung zur Seite Nr. 3
Contents General Information PC Display User Instructions ............................................. 2 Setting up Your PC Software Checking Parts ................................................ 4 (Based on Windows XP) ............................... 31 Control Panel ................................................. 5 Display Modes .............................................. 32 Connection Panel ............................................ 6 Setting the PC .................
Inhaltszusammenfassung zur Seite Nr. 4
Checking Parts Owner’s Instructions Remote Control/ Power Cord Warranty Card/ AAA Batteries Registration Card/ (Not available in all locations) (Not available in all locations) Stand-Base (2EA) / Ferrite Cores PC Cable Screws (4EA) Power Cord(3301-001110)/ (PPM50M7F) Speaker Wire(3301-001201) Sold Separately S-Video Cable Component Cables Audio Cables Video Cable HDMI/DVI Cable PC Audio Cable HDMI Cable Ferrite Core (Speaker Wire, Power Cord) ➢ The ferrite cores are used to shield the cables
Inhaltszusammenfassung zur Seite Nr. 5
Control Panel Front Panel The product color and shape may vary depending on the model. ➢ 1 SOURCE( ) 5 (Power) button Displays a menu of all of the available input Press to turn the PDP Display on and off. sources (AV, S-Video, Component, PC1, 6 Power Indicator PC2, DVI, and HDMI). Blinks and turns off when the power is on and In the on-screen menu, use this button as ➢ lights up in stand-by mode. you would use the ENTER button on the remote control. 7 Remote Control Sensor Aim the remo
Inhaltszusammenfassung zur Seite Nr. 6
Connection Panel Rear Panel 2 3 4 5 6 7 8 9 0 ! PPM50M7F 1 PPM63M7F 2 3 4 5 6 7 8 9 0 ! 1 or or or The product color and shape may vary depending on the model. ➢ Whenever you connect an audio or video system to your set, ensure that all elements are switched off. ☛ When connecting an external device, match the color of the connection terminal to the cable. 1 POWER IN 7 PC IN2 (BNC) Connect the supplied power cord. Connect for RGB HV video signal input from 2 EXT SPEAKER (8Ω) a PC. Con
Inhaltszusammenfassung zur Seite Nr. 7
Viewing the Remote Control The performance of the remote control may be affected by bright light. ➢ 1 PDP display on # PDP display off 2 Direct channel selection $ Picture still Select to enter the numbers % Next channel(Not available) in the Timer. ^ External input selection 3 Not available & Previous channel 4 Volume increase (Not available) 5 Temporary sound switch-off * Information display 6 Volume decrease ( Exit from any display 7 Returns to the previous ) Confirm your choice (store
Inhaltszusammenfassung zur Seite Nr. 8
Installing Batteries in the Remote Control 1 Remove the cover on the rear of the remote control by pressing the symbol ( ) downwards and then pulling firmly to remove it. 2 Install two AAA size batteries. Make sure to match the “+” and “–” ends of the ➢ batteries with the diagram inside the compartment. Do not mix battery types, i.e. alkaline and manganese. 3 Replace the cover by aligning it with the base of the remote control and pressing it back into place. Remove the batteries and st
Inhaltszusammenfassung zur Seite Nr. 9
Installing the Display Vertically Samsung shall not be liable for damages caused by installing the product in a different direction from the figure above. You can install the PDP Display vertically. In this case, the fan automatically works. If you wish to stop the fan, position the PDP Display horizontally and then set Fan to Off in the Function menu. Please use a wall attachment panel when installing vertically. The unit must be installed with the menu buttons on the left when viewe
Inhaltszusammenfassung zur Seite Nr. 10
Rear of the PDP Display 1 Connect the PC cable between the PC IN and PC OUT on the rear of each PDP in the form of daisy chain. 2 Connect the PC cable between the RGB IN on the rear of the last connected PDP and the PC OUT on the rear of the PC. Example for Multiple Display Control connections Rear of the PDP Display 1 Connect the RS232C cable between the RS-232C IN and RS-232C OUT on the rear of each PDP in the form of daisy chain. 2 Connect the RS232C cable between the RS-232C IN on th
Inhaltszusammenfassung zur Seite Nr. 11
Connecting Speakers Speakers are optional. You have to purchase the speakers separately. ➢ 1 Remove the screws on the rear of the PDP Display. PPM50M7F PPM63M7F 2 Hang the two “T” shaped hangers on the square holes on the rear of the PDP Display. PPM50M7F PPM63M7F 3 Tighten the PDP Display and the speaker bracket using the screws removed from the PDP Display. PPM50M7F PPM63M7F When moving your PDP Display, do NOT hold the speaker connected to your PDP Display. It may ➢ damage the bracket clam
Inhaltszusammenfassung zur Seite Nr. 12
Viewing the Menus Picture 1 Press the MENU button. The main menu is displayed on the screen. Mode : Dynamic Contrast 100 Its left side has five icons: Picture, Sound, Function, Setup, Brightness 45 and Input. Sharpness 75 Color 55 2 Press the ▲ or ▼ button to select one of the icons. Tint G 50 R 50 Color Tone : Cool1 Press the ENTER button to access the icon’s sub-menu. Detailed Settings 3 Press the ▲ or ▼ button to move
Inhaltszusammenfassung zur Seite Nr. 13
Viewing an External Signal Source You can switch between viewing signals from connected Input equipment, such as a VCR, DVD, Set-Top Box, and the PDP Source List : AV Edit Name Display source. 1 Press the MENU button to display the menu. 2 Press the ▲ or ▼ button to select Input, then press the ENTER button. 3 Press the ENTER button again to select Source List. 4 Press the ▲ or ▼ button to select the signal source, then Move Enter Return press the ENTER button. Source List Availa
Inhaltszusammenfassung zur Seite Nr. 14
Changing the Picture Standard You can select the type of picture which best corresponds to Picture your viewing requirements. Mode : Dynamic Contrast 100 Brightness 45 1 Press the MENU button to display the menu. Sharpness 75 2 Press the ENTER button to select Picture. Color 55 Tint G 50 R 50 3 Press the ENTER button again to select Mode. Color Tone : Cool1 Detailed Settings 4 Select the required mode by pressing the ▲ or ▼ butt
Inhaltszusammenfassung zur Seite Nr. 15
Making Detailed Picture Settings You can make detailed picture settings. Picture Mode : Movie 1 Press the MENU button to display the menu. Contrast 80 Brightness 45 2 Press the ENTER button to select Picture. Sharpness 10 Color 53 3 Press the ▲ or ▼ button to select Detailed Settings, then Tint G 50 R 50 press the ENTER button. Color Tone : Warm2 Detailed Settings 4 Select the desired option by pressing the ▲ or ▼ button,
Inhaltszusammenfassung zur Seite Nr. 16
Selecting the Picture Size You can select the picture size which best corresponds to Picture your viewing requirements. More Size : 4 : 3 Digital NR : Off 1 Press the MENU button to display the menu. Active Color : On DNIe : On 2 Press the ENTER button to select Picture. Movie Plus : On Reset : OK 3 Press the ▲ or ▼ button to select Size, then press the ENTER button. 4 Select the desired option by pressing the ▲ or ▼ button, then press the ENTER button. Move Enter Return
Inhaltszusammenfassung zur Seite Nr. 17
Digital NR / Active Color / DNIe / Movie Plus Picture 1 Press the MENU button to display the menu. More 2 Press the ENTER button to select Picture. Size : 4 : 3 3 Select the required option by pressing the ▲ or ▼ button, then Digital NR : Off Active Color : On press the ENTER button. DNIe : On Movie Plus : On Available options: Digital NR, Active Color, DNIe, Reset : OK Movie Plus 4 When you are satisfied with your setting, press the ENTER button. Move Enter Return 5 Pr
Inhaltszusammenfassung zur Seite Nr. 18
Sound Features Sound 1 Press the MENU button to display the menu. Mode : Custom 2 Press the ▲ or ▼ button to select Sound, then press the Equalizer ENTER button. SRS TS XT : Off 3 Select the required option by pressing the ▲ or ▼ button, then Auto Volume : Off Internal Mute : Off press the ENTER button. Sound Select : Main Available options: Mode, Equalizer, SRS TS XT, Auto Volume, Reset Internal Mute, Sound Select, Reset 4 When you are satisfied with your setting, press
Inhaltszusammenfassung zur Seite Nr. 19
Auto Volume: Off/On Each broadcasting station has its own signal conditions, and it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. Internal Mute: Off/On If you want to hear the sound through separate speakers, turn the internal mute off. The VOL +, VOL -, S.MODE, a
Inhaltszusammenfassung zur Seite Nr. 20
Time Features Setup 1 Press the MENU button to display the menu. Screen Burn Protection 2 Press the ▲ or ▼ button to select Setup, then press the Language : English ENTER button. Time Game Mode : Off 3 Press the ▲ or ▼ button to select Time, then press the Blue Screen : Off Melody : Off ENTER button. PC Home Theatre PC : Off 4 Select the desired option by pressing the ▲ or ▼ button, then press the ENTER button. More Available options: Clock Set, Sleep Timer, Timer1,
