Inhaltszusammenfassung zur Seite Nr. 1
BN68-00951A-00Eng 8/3/05 3:06 PM Page 1
PDP-TELEVISION
(PLASMA DISPLAY PANEL)
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
Picture In Picture (PIP)
Colour Weakness Enhancement Mode
My Colour Control
TELETEXT (Option)
SRS TruSurroundXT
Digital Natural Image engine
This device is a Class B digital apparatus.
Register your product at www.samsung.com/global/register
Inhaltszusammenfassung zur Seite Nr. 2
BN68-00951A-00Eng 8/3/05 3:06 PM Page 2 User Instructions ◆ Screen Image retention Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma monitor panel for more than 2 hours as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. ◆ Height The PDP can normally operate only under 2000m in h
Inhaltszusammenfassung zur Seite Nr. 3
BN68-00951A-00Eng 8/3/05 3:06 PM Page 3 Checking Parts Sold Separately HDMI Cable Antenna Cable S-VIDEO Cable Owner’s Instructions Remote Control/ AAA Batteries Component Cables PC Cable (RCA) t. Power Cord Warranty Card/ Registration Card/ Safety Guide Manual PC Audio Cable HDMI/DVI Cable (Not available in all locations) English - 3
Inhaltszusammenfassung zur Seite Nr. 4
BN68-00951A-00Eng 8/3/05 3:06 PM Page 4 Contents ◆ FOREWORD ■ User Instructions............................................................................................ 2 ◆ CONNECTING AND PREPARING YOUR DISPLAY ■ Control Panel................................................................................................. 6 ■ Infrared Remote Control................................................................................ 8 ■ Inserting the Batteries in the Remote Control.............
Inhaltszusammenfassung zur Seite Nr. 5
BN68-00951A-00Eng 8/3/05 3:06 PM Page 5 Contents (continued) ◆ USING YOUR DISPLAY (continued) ■ Customizing the Sound Settings ................................................................... 44 ■ Adjusting the Volume Automatically .............................................................. 44 ■ Setting the TruSurround XT........................................................................... 45 ■ Selecting the Internal Mute............................................................
Inhaltszusammenfassung zur Seite Nr. 6
BN68-00951A-00Eng 8/3/05 3:06 PM Page 6 Control Panel The actual configuration of your TV may be different, depending on ➢ ➢ your model. Front of the TV Speaker a) a) SOURCE button e) (ENTER) button Select the external input source. Confirm your choice (Store or Enter). b) MENU button f) (POWER) button Display the on-screen menu. Press to turn the TV on and off. c) VOL +, - buttons Power Indicator Adjust the volume. - Power Off: Blue b - Power On: Off d) CH , buttons Select channels. g)
Inhaltszusammenfassung zur Seite Nr. 7
BN68-00951A-00Eng 8/3/05 3:06 PM Page 7 Control Panel (continued) The actual configuration of your TV may be different, depending on ➢ your model. Side of the TV Rear Panel a) HDMI/DVI IN e) PC IN / AUDIO Connect to the HDMI jack of a device with Connect to the video and audio output jack on HDMI output. These inputs can also be used your PC. as a DVI connection with separate analog audio inputs. An optional HDMI/DVI cable f) S-VIDEO 1, 2 will be necessary to make this connection. Video inp
Inhaltszusammenfassung zur Seite Nr. 8
BN68-00951A-00Eng 8/3/05 3:06 PM Page 8 Infrared Remote Control Y yo TURNS THE TV ON AND OFF WHEN YOU PRESS A BUTTON , ‘ ’ APPEARS ALONG WITH SELECTED MODE (TV, VCR, CABLE, DVD, OR STB) AND REMAINING BATTERIES ON LCD PICTURE EFFECT SELECTION SOUND EFFECT SELECTION/ MAKE THE REMOTE CONTROL WORK FOR TV, VCR, CABLE, DVD, OR STB TELETEXT CANCEL DIRECT CHANNEL SELECTION AUTOMATIC SWITCH-OFF/ SWITCH REPEATEDLY BETWEEN THE TELETEXT SIZE SELECTION LAST TWO CHANNELS DISPLAYED/ TELETEXT SUB-PAGE NEXT
Inhaltszusammenfassung zur Seite Nr. 9
BN68-00951A-00Eng 8/3/05 3:06 PM Page 9 Inserting the Batteries in the Remote Control You must insert or replace the batteries in the remote control when you: ◆ Purchase the television ◆ Find that the remote control is no longer operating correctly 1 Remove the cover on the rear of the remote control by pressing the symbol ( ) downwards and then pulling firmly to remove it. 2 Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking care to respect the polarities: ◆ - on the battery agai
Inhaltszusammenfassung zur Seite Nr. 10
BN68-00951A-00Eng 8/3/05 3:06 PM Page 10 Installing the Display on the Wall Attachment Panel Refer to the correct installation guide according to your wall bracket. ➢ Installation Notes ◆ Contact a technician for installing the wall bracket. ◆ ◆ Samsung Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer. ◆ This product is for installing on cement walls. The product may not stay in place when installed on plaster or
Inhaltszusammenfassung zur Seite Nr. 11
BN68-00951A-00Eng 8/3/05 3:06 PM Page 11 Installing the Display on the Wall Attachment Panel (continued) t. To mount the product on the wall bracket ◆ The shape of the product may vary depending on the model. (The assemblies of the plastic hanger and the screw are the same) 1 Remove the 4 screws on the back of the product. 2 Insert the screw into the plastic hanger. (See the figure below) ◆ Mount the product on the wall bracket ☛ and make sure it is properly fixed to the left and right plas
Inhaltszusammenfassung zur Seite Nr. 12
BN68-00951A-00Eng 8/3/05 3:06 PM Page 12 Connecting to an Aerial or Cable Television Network To view television channels correctly, a signal must be received by T the set from one of the following sources: ◆ An outdoor aerial ◆ A cable television network ◆ A satellite network 1 In these cases, connect the aerial or network input cable to the ANT IN jack on the rear of the television. Rear of the TV 2 If you are using an indoor aerial, you may need to turn it when tuning your television until
Inhaltszusammenfassung zur Seite Nr. 13
BN68-00951A-00Eng 8/3/05 3:06 PM Page 13 Switching Your Television On and Off The mains lead is attached to the rear of your television. 1 Plug the mains lead into an appropriate socket. Front of the TV Result: The Standby indicator on the front of the television lights up. The main voltage is indicated on the rear of the television ➢ and the frequency is 50 or 60Hz. 2 Press the power button on the front of the television (or POWER () button on the remote control) to switch the television on.
Inhaltszusammenfassung zur Seite Nr. 14
BN68-00951A-00Eng 8/3/05 3:06 PM Page 14 Familiarizing Yourself with the Remote Control The remote control is used mainly to: W se ◆ Change channels and adjust the volume. T ◆ Set up the television using the on-screen menu system. The following table presents the most frequently used buttons and their functions. Button Viewing Function Menu Function Used to display the next - stored channel. Used to display the - previous stored channel. to Used to display the corresponding channels. ➢ For do
Inhaltszusammenfassung zur Seite Nr. 15
BN68-00951A-00Eng 8/3/05 3:06 PM Page 15 Plug & Play Feature When the television is initially powered on, several basic customer Plug & Play settings proceed automatically and subsequently. Start Plug & Play. The following settings are available. OK 1 If the television is in standby mode, press the POWER() button Enter Exit on the remote control. Plug & Play Result: The message to start Plug & Play is displayed. English Language 2 To start Plug & Play, press the ENTER() button. Français Re
Inhaltszusammenfassung zur Seite Nr. 16
BN68-00951A-00Eng 8/3/05 3:06 PM Page 16 Plug & Play Feature (continued) If you want to reset this feature... Y de TV Setup m 1 Press the MENU() button. Plug & Play yo Language : English Result: The main menu is displayed. to Time Child Lock 2 Press the … or † button to select Setup. Blue Screen : Off Melody : Off Result: The Setup menu is displayed. Colour Weakness : Off More 3 Press the ENTER() button. Move Enter Return 4 Press the ENTER() button again to select Plug & Play. Result: The me
Inhaltszusammenfassung zur Seite Nr. 17
BN68-00951A-00Eng 8/3/05 3:06 PM Page 17 Storing Channels Automatically You can scan for the frequency ranges available to you (availability depends on your country). Automatically allocated programme numbers TV Channel may not correspond to actual or desired programme numbers. However Area : Asia/W.Europe you can sort numbers manually and clear any channels you do not wish Auto Store to watch. Manual Store Add/Delete Sort Name 1 Press the MENU() button. Fine Tune LNA : Off Result: The main
Inhaltszusammenfassung zur Seite Nr. 18
BN68-00951A-00Eng 8/3/05 3:06 PM Page 18 Storing Channels Manually You can store television channels, including those received via cable networks. TV Channel When storing channels manually, you can choose: Area : Asia/W.Europe Auto Store ◆ Whether or not to store each of the channels found. Manual Store Add/Delete ◆ The programme number of each stored channel which you Sort wish to identify. Name Fine Tune LNA : Off 1 Press the MENU() button. Move Enter Return Result: The main menu is displa
Inhaltszusammenfassung zur Seite Nr. 19
BN68-00951A-00Eng 8/3/05 3:06 PM Page 19 Storing Channels Manually (continued) 9 If you know the number of the channel to be stored, see the TV Manual Store following steps. Programme : P 1 ◆ Press the … or † button to select Channel. Colour System : AUTO Sound System : BG Press the ENTER() button. Channel : C 05 ◆ Press the … or † button to select C (Air channel) or Search : 175 MHz Store : ? S (Cable channel). ◆ Press the √ button. Adjust Enter Return ◆ Press the … or † button to select th
Inhaltszusammenfassung zur Seite Nr. 20
BN68-00951A-00Eng 8/3/05 3:06 PM Page 20 Skipping Unwanted Channels You can exclude the channels of your choice from the channel scan T operation. When you scan through the stored channels, those that you st TV Channel have chosen to skip are not displayed. Area : Asia/W.Europe All channels that you do not specifically choose to skip are displayed Auto Store during scanning. Manual Store Add/Delete Sort Name 1 Press the MENU() button. Fine Tune LNA : Off Result: The main menu is displayed. M
