Inhaltszusammenfassung zur Seite Nr. 1
Contact SAMSUNG WORLD-WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Contacte con SAMSUNG WORLD WIDE
Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención
al Cliente
Country Customer Care Center Web Site Address
Samsung Electronics Canada Inc., Customer Service 55
Standish Court Mississauga, Ontario L5R 4B2 Canada
CANADA 1-800-SAMSUNG (7267864) www.
Inhaltszusammenfassung zur Seite Nr. 2
Important Warranty Information Regarding Television Format Viewing Wide screen format PDP Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark side-bars on none
Inhaltszusammenfassung zur Seite Nr. 3
User Instructions Screen Image retention Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, refer to page 23 of this manual to reduce the degree of brightness and contrast of the screen when displaying a still image. Altitude The PDP can only operate normally at heights under 6500ft. Heat on the top of the P
Inhaltszusammenfassung zur Seite Nr. 4
Contents General Information Channel Control ■ List of Features ..............................................................5 ■ Selecting the Antenna ..................................................38 ■ Accessories ....................................................................5 ■ Clearing Scrambled Channels - Digital ........................38 ■ Viewing the Control Panel .............................................6 ■ Adding and Erasing Channels ...............................
Inhaltszusammenfassung zur Seite Nr. 5
General Information List of Features • Adjustable picture settings that can be stored in the TV’s memory. • Automatic timer to turn the TV on and off. • A special sleep timer. • V-Chip function. • Excellent Digital Interface & Networking : With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Set-Top Box needed. • Excellent Picture Quality - DNIe technology provides life-like clear images. • SRS TruSurround XT - SRS TruSurround XT provides a virtual Dolby sur
Inhaltszusammenfassung zur Seite Nr. 6
Viewing the Control Panel Buttons on the Lower-Right Part of the Panel The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. Front Panel buttons The product color and shape may vary depending on the model. ➢ Touch each button to operate. 1 SOURCE 5 Power Indicator Toggles between all the available input sources Blinks and turns off when the power is on and lights up (
Inhaltszusammenfassung zur Seite Nr. 7
Viewing the Connection Panel Rear Panel Jacks Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players. For more information on connecting equipment, see pages 9-15. The product color and shape may vary depending on the model. 1 POWER IN 7 ANT IN Connect the supplied power cord. Uses a 75Ω Coaxial connector for an Air/Cable Network. 2 DIGITAL AUDIO OUT (OPTICAL) Connect to a Digital Audio component. 8 SERVICE For service only. 3
Inhaltszusammenfassung zur Seite Nr. 8
Remote Control You can use the remote control up to a distance of about feet from the TV. 1 POWER % SOURCE Turns the TV on and off. Press to display all of the available video sources. 2 TV Selects the TV mode directly. ^ PRE-CH Tunes to the previous channel. 3 NUMERIC BUTTONS & CH Press to directly select a channel. Press to change channels. 4 – Press to select additional channels * CC (digital and analog) being Controls the caption decoder. broadcast by the same station.
Inhaltszusammenfassung zur Seite Nr. 9
Installing Batteries in the Remote Control 1 Lift the cover at the back of the remote control upward as shown in the figure. Install two AAA size batteries. Make sure to match the “+” and “–” ends of the batteries with the diagram inside the ➢ compartment. Do not mix battery types, i.e. alkaline and manganese. ➢ Close the cover as shown in the figure. Remove the batteries and store them in a cool, dry place if you won’t be using the ➢ remote control for a long time. The remote control c
Inhaltszusammenfassung zur Seite Nr. 10
Connecting Cable TV To connect to a cable TV system, follow the instructions below. Cable without a Cable Box 1 Plug the incoming cable into the ANT IN terminal on the back of the TV. Because this TV is cable-ready, you do not need a cable box to view ➢ ANT IN unscrambled cable channels. Connecting to a Cable Box that Descrambles All Channels 1 Find the cable that is connected to the ANT OUT terminal on your cable box. This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”. ANT
Inhaltszusammenfassung zur Seite Nr. 11
Connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box) via HDMI This connection can only be made if there is an HDMI Output jack on the external device. This connection will provide the highest quality picture. 1 Connect an HDMI Cable TV Rear Panel TV Side Panel DVD Player or Cable Box / between the HDMI IN(1, 2 Satellite receiver (Set-Top Box) or 3) jack on the TV and the HDMI jack on the DVD Player or Cable Box / Satellite receiver (Set-Top Box). or HDMI Cable (Not suppl
Inhaltszusammenfassung zur Seite Nr. 12
Connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box) via Component cables The rear panel jacks on your TV make it easy to connect a DVD Player or Cable Box / Satellite receiver (Set-Top Box) to your TV. 1 Connect Component Cables TV Rear Panel between the COMPONENT IN (1 or 2) [Y, PB, PR] DVD Player or Cable Box/ jacks on the TV and the Satellite receiver (Set-Top Box) COMPONENT [Y, PB, PR] jacks on the DVD Player or Cable Box / Satellite receiver (Set-Top Box). Con
Inhaltszusammenfassung zur Seite Nr. 13
Connecting a VCR Video Connection These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages ~10). Skip step 1 if you have not yet connected to an antenna or a cable system. 1 Unplug the cable or antenna from the back of the TV. Connect the cable or antenna to the ANT IN terminal on the back of the VCR. Connect an Antenna Cable between the ANT OUT TV Rear Panel TV Side Panel terminal on the VCR and the A
Inhaltszusammenfassung zur Seite Nr. 14
Connecting a Digital Audio System The rear panel jacks on your TV make it easy to connect a Digital Audio System(Home theater/Receiver) to your TV. 1 Connect an Optical Cable TV Rear Panel between the DIGITAL AUDIO OUT (OPTICAL) jacks on Digital Audio System the TV and the Digital Audio Input (OPTICAL) jacks on the Digital Audio System. When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) terminal: Decrease the volume of the TV, and adjust the volume level
Inhaltszusammenfassung zur Seite Nr. 15
Connecting a PC Using the D-Sub Cable Using the D-Sub Cable TV Rear Panel 1 Connect a D-Sub Cable between PC IN [PC] jack on the TV and the PC output jack on your computer. PC Connect a PC Audio Cable between PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer. PC Audio Cable (Not supplied) 1 D-Sub Cable (Not supplied) Using the HDMI/DVI Cable Using the HDMI/DVI Cable TV Rear Panel 1 Connect a HDMI/DVI cable between the HDMI IN 2 jack on the TV and
Inhaltszusammenfassung zur Seite Nr. 16
Operation Turning the TV On and Off Press the POWER button on the remote control. You can also use the POWER button on the TV. It may take a while before you see a full picture. ➢ Plug & Play Feature When the TV is initially powered On, basic settings proceed automatically and subsequently: The Screen Saver is activated if there is no operating signal for longer than 15 minutes. ➢ 1 Press the POWER button on the remote control. Plug & Play The message Menu language, Store Demo, Channels a
Inhaltszusammenfassung zur Seite Nr. 17
Auto Program 5 The TV will begin memorizing all of the available channels. Auto Program in Progress. To stop the search before it has finished, press the ENTER button with Stop ➢ DTV Air : 5 Air : 3 DTV Cable : -- Cable : -- Air 67 selected. 68% Stop After all the available channels are stored, the TV starts to remove scrambled Enter Skip channels(see page38). The Auto program menu then reappears. Press the ENTER button when channel memorization is complete. Auto Program Clock Mode men
Inhaltszusammenfassung zur Seite Nr. 18
If you want to reset this feature... 1 Press the MENU button to display the menu. T V Setup Press the ▲ or ▼ button to select Setup, then press the ENTER button. Plug & Play ► Language : English ► Time ► Press the ENTER button to select Plug & Play. For further details on setting up V-Chip ► options, refer to the pages 16~17. Caption ► External Settings ► The Plug & Play feature is only available in the TV. ➢ Entertainment : Off ► ▼ More Move Enter Return Plug & Play Menu language, S
Inhaltszusammenfassung zur Seite Nr. 19
Adjusting the Volume Using the Volume Buttons 1 Press the VOL or VOL button to increase or decrease the volume. Using the Mute Button At any time, you can cut off the sound using the MUTE button. 1 Press MUTE and the sound cuts off. Mute will displayed on the screen. To turn mute off, press the MUTE button again, or simply press the VOL or VOL button. Using the TOOLS Button You can use the TOOLS button to select your frequently used functions quickly and easily. The “Tools” menu changes
Inhaltszusammenfassung zur Seite Nr. 20
Viewing the Menus 1 With the power on, press the MENU button. T V Picture The main menu appears on the screen. Its left side has five icons: Mode : Standard ► Cell Light 7 Picture, Sound, Channel, Setup, Input. Contrast 80 Brightness 45 Sharpness 50 Color 50 Tint G 50 R 50 Press the ▲ or ▼ button to select one of the icons. ▼ More Then press the ENTER button to access the icon’s sub-menu. Move Enter Exit Press the EXIT
