Inhaltszusammenfassung zur Seite Nr. 16
INST. MANUAL-BE4D-A (AUS) 4/1/08 5:37 PM Page 16 16 ❒ Connecting To the Front AV2 Input Jacks (Optional Model) It is convenient to use the AV input jack on the front panel for equipment that is often connected and disconnected. ■ To watch the Front AV2 video ■ input picture, select AV2 AV2 position by pressing the TV/AV Selector. Video/DVD Player * Model CA21SF1, CP21SF1 are not equipped with Front AV2 input terminal. ❒ Connecting To the Monitor Output Jacks The picture signal being displa
Inhaltszusammenfassung zur Seite Nr. 17
INST. MANUAL-BE4D-A (AUS) 4/1/08 5:37 PM Page 17 17 Aerial Connection ❒ Connecting Outdoor Aerial Connect the cable with a plug from a UHF (or VHF) aerial to the aerial socket on the cabinet back. Outdoor Aerial Aerial Cable Aerial Socket For all aerial circuit problems please consult your local dealer. Care and Cleaning The surface of the cabinet can be damaged if not properly maintained. Many common household aerosol sprays, cleaning agents, solvents and polishes will cause permanent damage
Inhaltszusammenfassung zur Seite Nr. 18
INST. MANUAL-BE4D-A (AUS) 4/1/08 5:37 PM Page 18 18 Specifications Power Source AC 127-240 Volts, 50/60Hz Colour System PAL/NTSC4.43/NTSC/PAL-60Hz Sound System B/G, I, D/KK’, M/M Channel Coverage VHF: E2-E12, A2-A13, R1-R12, J1-J12, K1-K9 UHF: 21-69, A14-A69, J13-J62, CATV: S1-S41, X, Y, Z, Z+1, Z+2 Aerial input impedance 75 Ω Audio output (RMS) Model: CA21YS2S, CP21YS2S, CA21KS2, CP21KS2, CA21SF1, CP21SF1, CA21KS2K, CP21KS2K: 5W + 5W Model: CA21XS2S, CP21XS2S: 10W + 1
Inhaltszusammenfassung zur Seite Nr. 19
INST. MANUAL-BE4D-A (AUS) 4/1/08 5:37 PM Page 19 19 Helpful Hints - Problems/Solutions Before requesting service check the following chart. Problem: Check these Conditions / Try these solutions: No picture, ● Check if TV is plugged in. no sound ● Try a different channel, if OK, probably station trouble. ● Adjust Brightness or Contrast control. Poor picture, ● Adjust Fine Tuning. (See page 9.) ● Check aerial connection. sound OK ● Adjust Colour or Tint control. ● Adjust Fine T
Inhaltszusammenfassung zur Seite Nr. 20
INST. MANUAL-BE4D-A (AUS) 4/1/08 5:37 PM Page 20 Part No. 1AA6P1P5578-A BE4D-A (FC8-A) SANYO ELECTRIC Co., Ltd.
Inhaltszusammenfassung zur Seite Nr. 1
INST. MANUAL-BE4D-A (AUS) 4/1/08 5:37 PM Page 1
CA21XS2S
Instruction Manual
CP21XS2S
CA21YS2S
CP21YS2S
Colour Television
CA21KS2
CP21KS2
CA21KS2K
CP21KS2K
CA21SF1
CP21SF1
Flat Screen
Multi System
CATV Hyper Band
256 Programmes with Automatic Tuning
AV Stereo Sound System
DVD Input with Video Component
Inhaltszusammenfassung zur Seite Nr. 2
INST. MANUAL-BE4D-A (AUS) 4/1/08 5:37 PM Page 2 2 Warning and Caution Warning High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set. Refer servicing to qualified service personnel. Do not drop or push objects into the television cabinet slots or openings. Never spill any kind of liquid on the television receiver. To prevent fire or electrical shock hazard, do not expose the television receiver to rain or moisture. The television sha
Inhaltszusammenfassung zur Seite Nr. 3
INST. MANUAL-BE4D-A (AUS) 4/1/08 5:37 PM Page 3 3 Contents Warnings and Cautions . . . . . . . . . . . . . . 2 Setting of the Private Position . . . . . . . . 13 Contents . . . . . . . . . . . . . . . . . . . . . . . . . 3 Setting of the OSD Language . . . . . . . . . 14 Plug & Play . . . . . . . . . . . . . . . . . . . . . . . 3 Connecting Other Equipment . . . . . . . . . 14 Front Control . . . . . . . . . . . . . . . . . . . . . 4-5 Connecting to the Rear AV1 Input Remote Control Trans
Inhaltszusammenfassung zur Seite Nr. 4
INST. MANUAL-BE4D-A (AUS) 4/1/08 5:37 PM Page 4 4 Each button listed in this section has the same function as it’s corresponding button on the remote control. Front Control Model CA21XS2S, CP21XS2S Press to open 3 2 1 VIDEO L-AUDIO-R TV/AV MENU - + CH 10 9 8 7 6 5 4 Model CA21YS2S, CP21YS2S Press to open 3 2 1 AV2 IN VIDEO L-AUDIO-R TV/AV MENU - + CH 10 9 8 7 6 5 4 1. Mains ON/OFF Button 7. TV/AV Selector 2. Remote Control Detector 8. Audio Input Jack-Right (AV2) 3. Stand-b
Inhaltszusammenfassung zur Seite Nr. 5
- + CH CH - + POWER TV/AV MENU POWER TV/AV MENU INST. MANUAL-BE4D-A (AUS) 4/1/08 5:37 PM Page 5 5 Each button listed in this section has the same function as it’s corresponding button on the remote control. Front Control Model CA21KS2, CP21KS2, CA21KS2K, CP21KS2K Pull to open 7 6 5 4 3 2 1 VIDEO L-AUDIO-R 10 9 8 Model CA21SF1, CP21SF1 7 6 5 4 3 2 1 1. Mains ON/OFF Button 7. TV/AV Selector 2. Remote Control Detector 8. Audio Input Jack-Right (AV2) 3. Stand-by and Power
Inhaltszusammenfassung zur Seite Nr. 6
INST. MANUAL-BE4D-A (AUS) 4/1/08 5:37 PM Page 6 6 Remote Control Transmitter TIMER button TV / AV Power ON/OFF button TV / AV Selector button TIMER RECALL/COLOUR SYSTEM button MUTE button Programme Selector button P P - -/- - /- - DIGIT button ALTERNATE button Programme UP button SWAP CH SCAN CH CHANNEL SCAN button SWAP button VOLUME - button VOLUME + button MENU STEREO/MONO button PICTURE MODE button CH PICTURE A•B MENU button Programme DOWN button SOUND S. SYS SURROUND BASS BASS EXPANDER
Inhaltszusammenfassung zur Seite Nr. 7
INST. MANUAL-BE4D-A (AUS) 4/1/08 5:37 PM Page 7 7 General Operation ❒ Remote Control Operation Standby/Power-on -/- - To switch the TV on and off. For shutting off a power supply completely, Press the Mains ON/OFF button on the front control of TV set. -/- - -/- - Sound mute -/- - -/- - -/- - To switch the sound from the speakers. The sound changes as follows; normal →mute(). -/- - -/- - -/- - -/- - -/- - -/- - -/- - TIMER Timer To Adjust Timer function OFF-TIMER →ON TIMER →ON PROGRAM -/-
Inhaltszusammenfassung zur Seite Nr. 8
INST. MANUAL-BE4D-A (AUS) 4/1/08 5:37 PM Page 8 8 General Operation ❒ Off Timer ❒ On Timer (Continued) The OFF TIMER will switch off the TV automatical- Press the VOLUME ( + or - ) button. The set ly after 30 minutes, 1 hour, 1 hour and 30 minutes, time will be increased or decreased by 10 2 or 2 hours. minutes each time the button is pressed ; the maximum time which can be set is 24 hours. Press the TIMER button. OFF 0:00 1 Use Direct Programme Selection to insert Press the VOLUME ( +
Inhaltszusammenfassung zur Seite Nr. 9
INST. MANUAL-BE4D-A (AUS) 4/1/08 5:37 PM Page 9 9 Colour and Sound System ❒ Setting of the Sound System (Semi-Auto or Manual Tuning mode ) Broadcast Transmission System List MODE SEMI Colour Sound Country Area SEARCH START System System POSITION 2 SYSTEM AUTO Union of Arab Emirates, Middle SIF BG Kuwait, Oman, Qatar, SKIP OFF East -- MEMORY Yemen, Bahrain, etc. PAL B/G Indonesia, Malaysia, SELECT ADJUST BACK Asia Singapore, Thailand,etc. EXIT China, etc. PAL D/K BG I DK M (5.5MHz) (6.0MHz) (
Inhaltszusammenfassung zur Seite Nr. 10
INST. MANUAL-BE4D-A (AUS) 4/1/08 5:37 PM Page 10 10 Picture Adjustment ❒ Basic Picture Adjustment Operation (Continued) ■ To return to Main menu, press the When “PICTURE” is not selected, select “PICTURE” with the Programme UP or ALTERNATE button. 2 DOWN button. ■ To return to the normal TV mode, press the MENU button. ( Or will automatically return to PICTURE the normal TV mode after 20 seconds.) AUDIO PRESET LANGUAGE Select desired control by pressing the Programme UP or DOWN button 4 Press
Inhaltszusammenfassung zur Seite Nr. 11
INST. MANUAL-BE4D-A (AUS) 4/1/08 5:37 PM Page 11 11 Tuning of the Channels Up to 256 broadcast stations in your reception ❒ Semi-Auto Tuning and Manual Tuning area can be stored in the electronic memory. Press the MENU button for MAIN menu There are three ways of tuning as follows; display. 1 1. Automatic Tuning (the basic way): All receivable channels are automatically tuned Select “PRESET” by pressing the in and memorized in consecutive programme Programme UP or DOWN button. 2 position.
Inhaltszusammenfassung zur Seite Nr. 12
INST. MANUAL-BE4D-A (AUS) 4/1/08 5:37 PM Page 12 12 ❒ Channel Copy Press the DIGIT button, “ 1 “ button and then This function can be utilized after Automatic “ 2 ” button on the remote control to enter Tuning. 3 programme number 12. (For example, to For example, to copy a TV channel on pro- enter programme number “ 3 “, press “ 3 ” gramme position “2” onto programme position button only. ) “6”; Select programme position “2” 1 SWAPPING SWAP 6 AND 12 6 2 Enter to SEMI-AUTO or MANUAL tuning
Inhaltszusammenfassung zur Seite Nr. 13
INST. MANUAL-BE4D-A (AUS) 4/1/08 5:37 PM Page 13 13 ❒ Skip Channel Set and cancel (Continued) Select “MEMORY” by pressing the Select “SKIP” by pressing the Programme UP 4 or DOWN button,then press the VOLUME +5 Programme UP or DOWN button, then press or - button to set SKIP to ON. To cancel Skip the VOLUME + or - button for memory. Channel function, set to OFF. MODE SEMI SEARCH START POSITION 4 SYSTEM AUTO MODE SEMI SIF BG SEARCH START SKIP ON POSITION 4 MEMORY OK SYSTEM AUTO SIF BG SKIP ON A
Inhaltszusammenfassung zur Seite Nr. 14
INST. MANUAL-BE4D-A (AUS) 4/1/08 5:37 PM Page 14 14 Setting of the OSD Language Press the MENU button for MAIN menu ENGLISH display. 1 ENGLISH ENGLISH y PCC PICTURE FRANCAIS AUDIO PORTUGUES PRESET LANGUAGE Select “ENGLISH”, “ ”, “ ”, Select “LANGUAGE “ by pressing the y “ P CC ”, “FRANÇAIS”, “PORTUGUES” by programme UP or DOWN button. 2 pressing the Programme UP or DOWN button. To return to the normal TV mode, press the MENU PICTURE button. AUDIO PRESET LANGUAGE Press the MENU button to re
Inhaltszusammenfassung zur Seite Nr. 15
INST. MANUAL-BE4D-A (AUS) 4/1/08 5:37 PM Page 15 15 ❒ Connecting To the Rear AV1 Input Jacks (Continued) ■ ■ When watching a video program input from the AV1 terminal, press the TV/AV button to select AV1. Whenever the TV/AV button is pressed, the mode will change as follows: AV1(DVD) AV2 AV1 28 TV mode (Optional model) ■ You can select a TV programme while watching a playback from a VCR ■ For example: ● To select programme position “9” while watching a playback from external VCR, press “9”
