Inhaltszusammenfassung zur Seite Nr. 1
LC-37GD6U LC-32GD6U OPERATION MANUAL MODE D’EMPLOI
LC-26GD6U MANUAL DE OPERACIÓN
LC-37GD6U
-
LC 32GD6U
LC-26GD6U
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA DE CRISTAL LIQUIDO
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE OPERACIÓN
ESPAÑOL FRANÇAIS ENGLISH
Inhaltszusammenfassung zur Seite Nr. 2
LC-37GD6U LC-32GD6U LC-26GD6U LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL • The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations. • Some items may be grayed out. They are not selectable. • The examples used throughout this manual are based on the LC-32GD6U model. IMPORTANT: Model No.: To aid reporting in case of loss or theft, please record the TV’s model and serial numbers in the space provided. Th
Inhaltszusammenfassung zur Seite Nr. 3
IMPORTANT INFORMATION CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CAUTION: DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER’S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES RE
Inhaltszusammenfassung zur Seite Nr. 4
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product. IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
Inhaltszusammenfassung zur Seite Nr. 5
IMPORTANT SAFETY INSTRUCTIONS • Water and Moisture — Do not use this product near water – for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. • Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommen
Inhaltszusammenfassung zur Seite Nr. 6
IMPORTANT SAFETY INSTRUCTIONS • Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, Iocation of
Inhaltszusammenfassung zur Seite Nr. 7
Contents IMPORTANT INFORMATION ………………………1 Audio Select …………………………………… 45 DEAR SHARP CUSTOMER …………………………3 Protecting/unprotecting still picture files …… 46 IMPORTANT SAFETY INSTRUCTIONS ……………3 Deleting a still image file ……………………… 46 Contents ………………………………………………6 Deleting all still image files …………………… 46 Trademarks ……………………………………………7 Recording a motion picture …………………… 47 COPYRIGHT AND LICENSE NOTICE ……………7 Displaying a motion picture ………………… 47 Patent Notice …………………………………………7 Rec. Mode ………………………
Inhaltszusammenfassung zur Seite Nr. 8
Contents Character Edge …………………………… 76 Secret number setting for parental control (AV input mode only) ……………………… 77 Parental control (setting V-CHIP level) ……… 79 How to temporarily release the V-CHIP BLOCK ……………………… 83 Reactivating the temporarily released V-CHIP BLOCK …………………………… 83 Center Channel Input ………………………… 84 Other viewing options …………………………… 85 Viewing a list of Digital broadcast channels… 85 Viewing information of the program ………… 85 Twin picture functions ………………………… 86 Presetting re
Inhaltszusammenfassung zur Seite Nr. 9
Supplied accessories Make sure the following accessories are provided with the product. Remote control unit (g1) “AAA” size battery (g2) AC cord (g1) RRMCGA264WJSA QACCDA019WJPZ Page 13 Page 13 Page 10 RF cable (g1) Cable clamp (g1) Operation manual (g1) Only included with the LC-32GD6U and LC-37GD6U. LC-37GD6U LC-32GD6U LC-26GD6U QCNW-A342WJZZ LHLDW0110CEZZ Pages 18 and 19 Page 10 TINS-B241WJZZ Bracket unit (g1) The LC-26GD6U is shipped with the speakers attached. * LC-37GD6U/LC-32GD6U: GCOVAA8
Inhaltszusammenfassung zur Seite Nr. 10
Preparation Where to place the TV First select the location where to place the TV. 1 Selecting the location of the TV Display 2 Setting the TV in place Handling the Display CAUTION • Select a place with no direct sunlight and good ventilation. • Do not remove the stand and speaker from the Display unless using an optional bracket to mount it. • Keep enough space above and behind the Display. • When you move TV, carry out by two people or more than it. • When you move the Display, hold the portio
Inhaltszusammenfassung zur Seite Nr. 11
Preparation Setting the TV After putting the Display in place, connect the AC cord. Use the cable clamp for bundling the cables. Removing the terminal cover 1 Display (rear view) Press down the hooks to remove the cover toward you. 2 Connecting the AC cord to the Display AC cord (with Ferrite core) Put the Ferrite core in the space as shown in the figure. If the AC cord is not put in properly, the terminal cover may not close. 3 Bundling the cables with the clamp Cable clamp for LC-37GD6U/LC-32G
Inhaltszusammenfassung zur Seite Nr. 12
Preparation Removing speakers 1 4 Unfasten the screw used to secure the speaker Unfasten the screws. bracket. 2 Take off the speaker terminal cover. 3 Disconnect the cable from the speaker. CAUTION • Do not remove the stand and speaker from the Display unless using an optional bracket to mount it. • Before performing work spread cushioning over the base area to lay the Display on. This will prevent it from being damaged. NOTE • To attach the speakers, perform the steps in reverse order. 11
Inhaltszusammenfassung zur Seite Nr. 13
Preparation Removing the stand Before detaching (or attaching) stand, unplug the AC cord from the AC input terminal. CAUTION • Do not remove the stand from the Display unless using an optional wall mount bracket to mount it. Before attaching/detaching stand • Before performing work make sure to turn off the TV. • Before performing work spread cushioning over the base area to lay the Display on. This will prevent it from being damaged. 1 2 Unfasten the four screws used to secure the Detach the st
Inhaltszusammenfassung zur Seite Nr. 14
Preparation Inserting the batteries If the remote control fails to operate Liquid Crystal Television functions, replace the batteries in the remote control unit. 1 Open the battery cover. 2 Insert two “AAA” size batteries 3 Close the battery cover. (supplied with the product). • Place the batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment. CAUTION Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instr
Inhaltszusammenfassung zur Seite Nr. 15
Part names * The examples used throughout this manual are based on the LC-32GD6U model. Display VOLUME buttons INPUT (VOLl/k ) button POWER CHANNEL buttons (CHs/r) button Remote control sensor Headphone jack OPC sensor CARD indicator POWER indicator OPC indicator SLEEP indicator *OPC: Optical Picture Control (See page 33.) 14
Inhaltszusammenfassung zur Seite Nr. 16
Part names Display LC-37GD6U LC-32GD6U i.LINK terminals INPUT 3 terminals MONITOR OUTPUT CableCARD slot terminals INPUT 1 INPUT 2 terminals DIGITAL IN terminal terminals LC-26GD6U MONITOR OUTPUT terminals INPUT 3 terminals INPUT 1 terminals INPUT 2 terminals AC INPUT terminal EXTERNAL SPEAKER terminals DIGITAL AUDIO OUTPUT terminal CENTER CHANNEL INPUT terminal INPUT 5 terminals INPUT 4 terminal * This terminal SYSTEM RESET** looks different on the LC-26GD6U. DC OUTPUT terminal RS-232C (Terminal
Inhaltszusammenfassung zur Seite Nr. 17
Part names 1 TV POWER: Switches the Liquid Crystal Television Remote control unit power on or Standby. (See page 20.) 2 DISPLAY: Displays the channel information. 117 3 SOURCE POWER: Turns the power of the external equipment on and off. 4 External equipment operational buttons: Operates the external equipment. 50 – 9: Sets the channel. 2 6 A-ANALOG-B: Each button selects the corresponding 18 3 antenna. 7VOL k k k k k/l l l l l: Sets the volume. (See page 23.) 4 8 CARD: Switches to card mode. 19
Inhaltszusammenfassung zur Seite Nr. 18
Watching TV Simple operations for watching a TV program Antennas To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set. NOTE • The antenna and the cable converter cannot be connected at the same time. F-type connector 1. A 75-ohm system is generally a round cable
Inhaltszusammenfassung zur Seite Nr. 19
Watching TV Cable TV/VCR connection (continued) A-2. Connecting with cable converter using AUX terminals for audio and video output. (If your cable TV converter has both RF OUTPUT and AUX terminals, it is recommended to connect it as shown in example A-1.) Coaxial Antenna Cable (commercially available) signal splitter (commercially available) Cable lead-in OUT IN VIDEO AUDIO Cable TV Converter RF Cable (Supplied) Audio Cable (commercially available) Video Cable (commercially available) VIDEO AUD
Inhaltszusammenfassung zur Seite Nr. 20
Watching TV C. Connecting Antenna Cable with VCR signal splitter (commercially available) Coaxial Antenna Cable (commercially available) Cable lead-in RF Cable (Supplied) Audio Cable (commercially available) Video Cable (commercially available) VIDEO AUDIO OUT IN VCR NOTE • Be sure to remember what kind of connection is made with your TV. • Shown here is the preferred method of connecting a VCR to your TV if you are in an area with good signal reception. This way you can view either TV programs
