Inhaltszusammenfassung zur Seite Nr. 1
LC-22SV6U
LC-22SV6U
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135 DE CRISTAL LÍQUIDO
TELEVISOR DE CRISTAL
SHARP CORPORATION
LÍQUIDO
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE OPERACIÓN
MANUAL DE OPERAÇÃO
Printed in Mexico
Imprimé au Mexique
Impreso en México
Impresso no México
TINS-A864WJZZ
03P08-MMG (J)
PORTUGUÊS ESPAÑOL FRANÇAIS ENGLISH
Inhaltszusammenfassung zur Seite Nr. 2
LC-22SV6U LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL IMPORTANT: Model No.: To aid reporting in case of loss or theft, please record the TV’s model and serial numbers in the space provided. The numbers are located at the Serial No.: rear of the TV. U.S.A. ONLY IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. The lightning flash with arrow- head symbol, within an equilat- eral triangle, is intended to alert CAUTION
Inhaltszusammenfassung zur Seite Nr. 3
IMPORTANT INFORMATION (Continued) WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. U.S.A. ONLY CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. “Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electrical Code that provides
Inhaltszusammenfassung zur Seite Nr. 4
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product. IMPORTANT SAFETY PRECAUTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. Ho
Inhaltszusammenfassung zur Seite Nr. 5
IMPORTANT SAFETY PRECAUTIONS (Continued) Cleaning—Unplug the power cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink and laundry tub, swimming pool and in a wet basement. Stand—Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product
Inhaltszusammenfassung zur Seite Nr. 6
IMPORTANT SAFETY PRECAUTIONS (Continued) Outdoor Antenna Grounding – If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, l
Inhaltszusammenfassung zur Seite Nr. 7
CONTENTS Page IMPORTANT INFORMATION.......................................................................................................1, 2 DEAR SHARP CUSTOMER .............................................................................................................3 IMPORTANT SAFETY PRECAUTIONS .......................................................................................3-5 CONTENTS .................................................................................................
Inhaltszusammenfassung zur Seite Nr. 8
SUPPLIED ACCESSORIES Make sure the following accessories are provided with the product. Remote Control “AAA” size (UM/SUM-4) Dry Battery (×2) RRMCGA169WJSA Antenna Cable AC Cord QCNWG0003CEPA QACCDA019WJPZ AC Adapter Operation Manual Cable Clamp (×2) (See page 9) UADP-A048WJPZ TINS-A864WJZZ LHLDW0109CESA A • AC cord enclosed in this product is an object for 110-125V. In using it on the 125-240V AC, please consult to the following. SHARP ELECTRONICS CORPORATION 1300 Naperville Drive, Romeoville,
Inhaltszusammenfassung zur Seite Nr. 9
PREPARATION Using the Remote Control POWER SLEEP OPC HEADPHONE Use the remote control by pointing it towards the remote control sensor window on the main unit. HEADPHONE jack Objects between the remote control and sensor OPC indicator window may prevent proper operation. SLEEP indicator POWER indicator Cautions regarding use of the remote OPC sensor control Remote control sensor Do not expose the remote control to shock. In addition, do not expose the remote control to liquid, and do not pla
Inhaltszusammenfassung zur Seite Nr. 10
PREPARATION (Continued) Removing the Terminal Covers Before connecting cables and cords into the rear terminals, remove the terminal covers. Push in the tabs and pull out the covers carefully. To mount the terminal cover, insert the 2 hooks on the bottom of the cover into the cabinet and press on the upper part of the cover until the tab locks in place with a click. Bundling Cables with Clamps Secure cables and cords with the supplied cable clamps so that they do not get caught when mounti
Inhaltszusammenfassung zur Seite Nr. 11
PREPARATION (Continued) Antenna Connection ANTENNAS • The antenna requirements for good color television reception are more important than those for black & white television reception. For this reason, a good quality outdoor antenna is strongly recommended. The following is a brief explanation of the type of connections that are provided with the various antenna systems. F-type connector 1. A 75-ohm system is generally a round cable with F-type connector that can easily be attached to a terminal
Inhaltszusammenfassung zur Seite Nr. 12
PREPARATION (Continued) Antenna Connection (Continued) CABLE TV (CATV) CONNECTION • A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75- ohm coaxial cable to the set, screw the 75-ohm cable to the ANT. terminal. • Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company. This converter/descrambler i
Inhaltszusammenfassung zur Seite Nr. 13
DISPLAY AND CONTROL OVERVIEW Controls Upper control panel VOL (–)/(+) CH ( )/( ) MENU TV/VIDEO MAIN POWER MENU TV/VIDEO MAIN POWER VOL CH To change the vertical angle of the LCD TV set, tilt the screen up to 5 degrees forward or 10 degrees backward. The TV set can also be rotated 25 degrees to right and left. Adjust the angle so that the TV set can be watched most comfortably. Speaker HEADPHONE jack Remote control sensor OPC indicator The Optical Picture Control indicator lights up OPC sensor gr
Inhaltszusammenfassung zur Seite Nr. 14
DISPLAY AND CONTROL OVERVIEW (Continued) Adjusting the screen view angle Terminals Y PB PR COMPONENT AUDIO (L) AUDIO (R) ANT. (Antenna terminal) POWER INPUT (DC 13V) Hold the carrying handle and tilt the screen while steadying the stand EXTERNAL SPEAKER with your other hand. (4q, 5W) You can adjust the screen vertically up to 5 degrees forward or 10 degrees backward, or rotate 25 degrees to right and left. Carrying handle S-VIDEO VIDEO AV-IN1 AUDIO (L) AUDIO (R) VIDEO AV-IN2 AUDIO (L) AUDIO (R
Inhaltszusammenfassung zur Seite Nr. 15
FLIP MODE AV MODE PIC. VIEW Virtual REMOTE CONTROL 1 DISPLAY Display the channel and time information. Display the receiving channel for 10 seconds. 1 2 BRIGHT (p. 28) 2 12 Adjust the brightness of the screen. 3 POWER (p. 21) 3 13 Switch the Liquid Crystal Television power DISPLAY on or off. 4 14 4 FREEZE (p. 55) 5 15 Freeze the screen image. ENTER 16 MENU 5 SLEEP (p. 27) MENU RETURN Set the sleep timer. 6 17 AUDIO MUTE CC TV/VIDEO ONLY 6 MENU RETURN (p. 24) 7 18 Return to the previous screen.
Inhaltszusammenfassung zur Seite Nr. 16
FLIP MODE AV MODE PIC. VIEW Virtual EZ SETUP (WITH AUTO CLOCK SETTING) EZ SETUP during the First Power On Control section of main unit When you turn on the TV for the first time, it will automatically memorize the broadcasting channels and clock. Please perform the following instructions before you press MAIN POWER. (1) Insert the batteries into the remote control. (See page 8.) MAIN POWER (2) Connect the antenna cable to the TV set. (See page 10.) (3) Connect the AC adapter to the POWER INPU
Inhaltszusammenfassung zur Seite Nr. 17
FLIP MODE AV MODE PIC. VIEW Virtual EZ SETUP (WITH AUTO CLOCK SETTING) (Continued) EZ SETUP during the First Power On (Continued) 6 Press a/b to select YES, and CONNECT ANTENNA OR CABLE. press ENTER. DISPLAY START EZ SETUP? YES If you want to stop the EZ SETUP NO process once it has started, press ENTER MENU RETURN MENU c and it will be canceled. If you AUDIO want to SET UP again, please refer MUTE ONLY CC TV/VIDEO ENTER/ to pages 40 to 42 on SET UP. FLASH- BACK VOL CH a/b/c ENTER MENU S
Inhaltszusammenfassung zur Seite Nr. 18
FLIP MODE AV MODE PIC. VIEW Virtual SETTING THE CLOCK AUTO CLOCK Setting There are two methods of setting the clock: AUTO CLOCK and MANUAL CLOCK. AUTO CLOCK uses EDS signals, which are provided by some TV stations, to automatically adjust the clock. MANUAL CLOCK set the clock manually in areas where no channel carries EDS signals. 1 Press MENU to display the MENU MENU SLEEP TIMER screen. AV ADJUST DISPLAY PRESET CLOSED CAPTION V–CHIP BLOCK ENTER SET UP MENU RETURN MENU 2 Press a/b to move the c
Inhaltszusammenfassung zur Seite Nr. 19
FLIP MODE AV MODE PIC. VIEW Virtual SETTING THE CLOCK (Continued) AUTO CLOCK Setting (Continued) AUTO CLOCK 5 Press a/b to move the cursor to RETURN EDS CH SET, and press ENTER. EDS CH SET [AUTO ] DISPLAY EDS CH [––– ] START 6 Press c/d to select AUTO or MANUAL, and press ENTER. ENTER MENU MENU RETURN 7 Press a/b to move the cursor to AUDIO MUTE CC TV/VIDEO ONLY START, and press ENTER. ENTER/ FLASH- BACK VOL CH ENTER MENU a/b/c/d ADJUST : ENTER : EXIT: MENU PLEASE WAI T NOW
Inhaltszusammenfassung zur Seite Nr. 20
FLIP MODE AV MODE PIC. VIEW Virtual SETTING THE CLOCK (Continued) MANUAL CLOCK Setting If there are no channels with EDS signals, set the clock manually using MANUAL CLOCK. 1 Press MENU to display the MENU MENU SLEEP TIMER screen. AV ADJUST DISPLAY PRESET 2 Press a/b to move the cursor to CLOSED CAPTION V–CHIP BLOCK SET UP, and press ENTER. ENTER SET UP MENU RETURN MENU AUDIO MUTE CC TV/VIDEO ONLY 3 Press a/b to move the cursor to ENTER/ SET UP FLASH- BACK RETURN CLOCK, and press ENTER. a/b/c/d
