Bedienungsanleitung Broilmaster B101586-4-0112

Bedienungsanleitung für das Gerät Broilmaster B101586-4-0112

Gerät: Broilmaster B101586-4-0112
Kategorie: Gasgrill
Produzent: Broilmaster
Größe: 1.85 MB
Datum des Hinzufügens: 1/27/2014
Seitenanzahl: 24
Anleitung drucken

Herunterladen

Wie kann man es nutzen?

Unser Ziel ist Ihnen einen schnellen Zugang zu Inhalten in Bedienungsanleitungen zum Gerät Broilmaster B101586-4-0112 zu garantieren. Wenn Sie eine Online-Ansicht nutzten, können Sie den Inhaltsverzeichnis schnell durchschauen und direkt zu der Seite gelangen, auf der Sie die Lösung zu Ihrem Problem mit Broilmaster B101586-4-0112 finden.

Für Ihre Bequemlichkeit

Wenn das direkte Durchschauen der Anleitung Broilmaster B101586-4-0112 auf unserer Seite für Sie unbequem ist, können sie die folgende zwei Möglichkeiten nutzen:

  • Vollbildsuche – Um bequem die Anleitung durchzusuchen (ohne sie auf den Computer herunterzuladen) können Sie den Vollbildsuchmodus nutzen. Um das Durchschauen der Anleitung Broilmaster B101586-4-0112 im Vollbildmodus zu starten, nutzen Sie die Schaltfläche Vollbild
  • Auf Computer herunterladen – Sie können die Anleitung Broilmaster B101586-4-0112 auch auf Ihren Computer herunterladen und sie in Ihren Sammlungen aufbewahren. Wenn Sie jedoch keinen Platz auf Ihrem Gerät verschwenden möchten, können Sie sie immer auf ManualsBase herunterladen.
Broilmaster B101586-4-0112 Handbuch - Online PDF
Advertisement
« Page 1 of 24 »
Advertisement
Druckversion

Viele Personen lesen lieber Dokumente nicht am Bildschirm, sondern in gedruckter Version. Eine Druckoption der Anleitung wurde ebenfalls durchdacht, und Sie können Sie nutzen, indem Sie den Link klicken, der sich oben befindet - Anleitung drucken. Sie müssen nicht die ganze Broilmaster B101586-4-0112 Anleitung drucken, sondern nur die Seiten, die Sie brauchen. Schätzen Sie das Papier.

Zusammenfassungen

Unten finden Sie Trailer des Inhalts, der sich auf den nächsten Anleitungsseiten zu Broilmaster B101586-4-0112 befindet. Wenn Sie den Seiteninhalt der nächsten Seiten schnell durchschauen möchten, können Sie sie nutzen.

Inhaltszusammenfassungen
Inhaltszusammenfassung zur Seite Nr. 1

i T ns alla TiOn i T ns T ruc iOns
MODELS MODELS
PCB1-2 BL26P-1
DCB1-2 SS26P-1
MODELS
BL48G-1
SS48G-1
B101652
vErify thAt All pArtS liStEd on thE ExplodEd viEw of thiS mAnuAl hAvE bEEn inCludEd in
thiS CArton bEforE bEginning inStAllAtion.
CAution: uSE CAution whEn hAndling pArtS, AS thEy mAy ContAin ShArp EdgES.
work glovES ArE rECommEndEd to prEvEnt injury.
Keep This Owner ’s Manual FOr FT u ure r eFerence .
EmpirE Comfort SyStEmS, inC • 918 frEEburg AvE. • bEllEvillE, il 62220
B101586-

Inhaltszusammenfassung zur Seite Nr. 2

tAblE of ContEntS CongrAtulAtionS! You have chosen the finest grill for your outdoor cooking pleasure. Please take time to read this entire manual before as- ® sembling your Broilmaster Grill accessory. Important Information ..........................................................................................................4 PCB1-2, DCB1-2 Installation Instructions .......................................................................5-10 Cart Exploded View & Parts List .........

Inhaltszusammenfassung zur Seite Nr. 3

thiS gAS ACCESSory iS dESignEd for outdoor uSE only IMPORTANT: This manual should be read thoroughly by the person installing the grill mounting and all persons who will use and maintain the grill mounting. The installer should be sure the manual is left in the possession of the user. The user should retain this manual for future reference when using or cleaning the grill mounting and to properly identify any repair parts that may be required. WARNING: Reference this manual for proper inst

Inhaltszusammenfassung zur Seite Nr. 4

i MpOT r T an inFOM r a TiOn Grill Location gas Types ® Broilmaster Gas Grills are designed for outdoor use Never use liquid propane gas with a grill designed for ONLY. natural gas, or natural gas with a grill designed for liquid propane gas. The type of gas required for your grill is These mounting accessories are designed for use with defined on its product identification label. Questions ® Broilmaster gas grills and must not be used with any regarding different types of gases shoul

Inhaltszusammenfassung zur Seite Nr. 5

pCb1-2, dCb1-2 i T ns alla TiOn i T ns rucTiOns vErify thAt All pArtS liStEd on thE ExplodEd viEw of thiS mAnuAl hAvE bEEn inCludEd in thiS CArton bEforE bEginning inStAllAtion. CAution: uSE CAution whEn hAndling pArtS, AS thEy mAy ContAin ShArp EdgES. work glovES ArE rECommEndEd to prEvEnt injury. rEmovE protECtivE CoAting And vErify thAt All pArtS liStEd on thE ExplodEd viEw of thiS mAnuAl hAvE bEEn inCludEd bEforE bEginning ASSEmbly. toolS rEquirEd: phillipS SCrEw drivEr (An ElECtriC SC

Inhaltszusammenfassung zur Seite Nr. 6

CArt ExplodEd viEw & pArtS liSt 4 11 6 12 13 10 3 5 2 1 7 9 8 Remove protective coating from stainless steel parts starting at pop rivets and verify that all parts listed in the exploded view on this page have been included before beginning this installation. Caution: Use caution when handling parts, as they may contain sharp edges. Work gloves are recommended to prevent injury. PART NO. INDEX DESCRIPTION NO. PCB1 DCB1 H3PK1 1 B101585 B101584 B101584 Front Panel 2 B101651 B101642 B10164

Inhaltszusammenfassung zur Seite Nr. 7

CArt hArdwArE pACkAgE 10-24 KEPS NUT PHILLIPS TRUSS HEAD SCREW 1/4-20 X 3/4 1/4-20 WING NUT HEX HEAD BOLT 1/4-20 X 3/4 ½ SNAP BUSHING 1/4-20 HEX NUT 1/4 ID X 1/2 OD LOCK WASHER PHILLIPS TRUSS HEAD SCREW 1/4-20 X 1 1/4 PHILLIPS SCREW 10-24 X 1/2 1/4 ID X 5/8 OD FLAT WASHER Note: Hardware shown at actual size where possible. Description Qty Description Qty Supplied Supplied PHILLIPS TRUSS HEAD SCREW 1/4-20 X 3/4 8 10-24 KEPS NUT 6 HEX HEAD BOLT 1/4-20 X 3/4 4 1/4-20 WING NUT 1 1/4-20 HEX NUT 4

Inhaltszusammenfassung zur Seite Nr. 8

CArt ASSEmbly 3. Align the holes on the front and side panel assemblies and Caution: Be careful when handling parts, as they may secure with six #10-24 x 1/2” Phillips screws and 10-24 Keps contain sharp edges. Work gloves are recommended to prevent Nuts provided (3 on each side). Do not tighten these screws injury. Remove protective plastic covering. until all are installed. Use black screws for black carts and stainless steel screws for stainless steel carts. See Figures 2 1. For St

Inhaltszusammenfassung zur Seite Nr. 9

CArt ASSEmbly 5. Attach Rear Brace to the Left and Right Side Assemblies with two 1/4-20 x 3/4” Phillips Truss Head screws and 1/4-20 Hex nuts. See Figure 5. Important: Make sure the brace goes in the cutout of the support bracket. Figure 5 6. Insert bushing in the front panel on the right for P and H series and on the left for R and T series grills. Install rubber guard over cart cut out. See Figure 6. Figure 7 8. Attach the Heat Shield to the Left and Right side assemblies with two 1/4-

Inhaltszusammenfassung zur Seite Nr. 10

CArt ASSEmbly 9. For Grill Heads other than R3 Series, continue on to Step 10. 10. Mount the tank retainer to the cart by using 1/4-20 x 1 1/4 Phil- lips Truss Head screw and 1/4-20 wing nut. For R3 Series Grill Heads: Press in the two sides of the Control Housing (provided with Grill Head) and fit it into the opening under the grill head as shown in Figure 10. Grill Assembly will look like Figure 11. Note: It may be easier to insert one side of the control housing first, and then p

Inhaltszusammenfassung zur Seite Nr. 11

bl26p-1, SS26p-1 pAtio bASE i nsT alla TiOn i T ns T ruc iOns wArning: thiS pAtio bASE iS not dESignEd for uSE with An lp gAS CylindEr. wArning: SEE your grill ownEr'S mAnuAl for propEr loCAtion, minimum ClEArAnCES, And othEr importAnt SAfEty informAtion bEforE proCEEding with inStAllAtion of thiS ap TiO pOsT . vErify thAt All pArtS liStEd on thE ExplodEd viEw of thiS mAnuAl hAvE bEEn inCludEd in thiS CArton bEforE bEginning inStAllAtion. CAution: uSE CAution whEn hAndling pArtS, AS thEy mAy

Inhaltszusammenfassung zur Seite Nr. 12

pAtio bASE ExplodEd viEw & pArtS liSt 3.08 8 9 2.63 Remove protective coating from stainless steel parts starting at pop rivets and verify that all parts listed in the exploded view on this page have been included before beginning this installation. Caution: Use caution when handling parts, as they may contain sharp edges. Work gloves are recommended to prevent injury. PART NO. INDEX NO. DESCRIPTION SS26P BL26P 1 B101660 B101644 Post Assembly 2 B101760 B101760 Upper Bracket Assembly 3 B1

Inhaltszusammenfassung zur Seite Nr. 13

pAtio bASE hArdwArE pACkAgE HEX HEAD SCREW 1/4-20 X 1 1/2 HEX HEAD BOLT 1/4-20 X 3/4 1/4 ID X 1/2 OD LOCK WASHER 1/4 ID X 5/8 OD FLAT WASHER HEX HEAD SCREW 10 X 1/2 HEX HEAD SCREW 10 X ½ SELF DRILL Note: Hardware shown at actual size where possible. Description Quantity Notes Supplied HEX HEAD SCREW 1/4-20 X 1 1/2 4 1/4 ID X 1/2 OD LOCK WASHER 4 HEX HEAD SCREW 10 X 1/2 SELF DRILL 12 SS26P-1 Models Only HEX HEAD BOLT 1/4-20 X 3/4 4 1/4 ID X 5/8 OD FLAT WASHER 4 HEX HEAD SCREW 10 X 1/2 12 BL26P-1

Inhaltszusammenfassung zur Seite Nr. 14

pAtio bASE inStAllAtion 2. Fasten the bottom of the post to the cast base using 1/4 x 1/2 NOTICE: Assemble post before assembling grill. Lock Washers, and 1/4-20 x 1 1/2 Hex Head bolts. See Figure 2. Anchor the cast iron patio base to your patio using the two holes The SS26P and BL26P Patio Bases are only for use with Broilmaster provided in the base. (Hardware not included) Gas Grills. Before proceeding with installation read your Owner’s Note: Make sure that the large rectangular cut

Inhaltszusammenfassung zur Seite Nr. 15

pAtio bASE inStAllAtion 5. For Grill Heads other than R3 Series, continue on to Step 6. 7. Position the grill head onto the post and fasten with ¼-20 x ¾ For R3 Series Grill Heads: Bend the tabs on the Post Cover Hex Head Screws and 1/4 x 5/8 Flat Washers. See Figure 7. Plate to 90° as shown in Figure 5. Two different size cover plates are included with the R3 Series Grill Heads. Choose the plate that will best fit your post. Note: If using the stainless steel Post Cover Plate, bend the

Inhaltszusammenfassung zur Seite Nr. 16

pAtio bASE inStAllAtion 9. Install the post access door and grease cup as shown in Figures 9 and 10. Figure 9 STEP #1 STEP #2 STEP #4 STEP #3 NOTE: GAS LINE REMOVED FOR CLARITY Figure 10 10. Continue assembly as directed by the Owner’s Manual pack- aged with the grill head. Page 16 B101586-4-0112

Inhaltszusammenfassung zur Seite Nr. 17

bl48g-1, SS48g-1 onE piECE in-ground poSt b101652 two piECE in-ground poSt i nsT alla TiOn i nsTrucTiOns wArning: thiS in-ground poSt iS not dESignEd for uSE with An lp gAS CylindEr. wArning: SEE your grill ownEr’S mAnuAl for propEr loCAtion, minimum ClEArAnCES, And othEr importAnt SAfEty informAtion bEforE proCEEding with inStAllAtion of thiS in-ground pOT s . vErify thAt All pArtS liStEd on thE ExplodEd viEw of thiS mAnuAl hAvE bEEn inCludEd in thiS CArton bEforE bEginning inStAllAtion. C

Inhaltszusammenfassung zur Seite Nr. 18

in-ground poSt ExplodEd viEw & pArtS liSt 3.08 6 8 5 9 Remove R p otective tingcoa fRom ainlessst steel R ap ts aR st ting ta pop Rivets and veRify ttha all aR p ts listed in the exploded view on this agep veha been included R befo e beginning this tionallainst . c T au O i n : u se caution when handling aR p ts , as they yma aincont shaRp edges . w R o k gloves R a e Recommended ot pRevent injuR y . INDEX NO. PART NUMBER DESCRIPTION SS48G B101652 BL48G 1 B101674 - B101672 Post Assembly 2 B101

Inhaltszusammenfassung zur Seite Nr. 19

in-ground hArdwArE pACkAgE HEX HEAD SCREW 10 X 1/2 SELF DRILL HEX HEAD BOLT 1/4-20 X 3/4 1/4 ID X 5/8 OD FLAT WASHER HEX HEAD SCREW 10 X 1/2 BLACK Note: Hardware shown at actual size where possible. Description Quantity Notes Supplied HEX HEAD SCREW 10 X 1/2 SELF DRILL 4 SS48G-1 Models Only HEX HEAD BOLT 1/4-20 X 3/4 4 1/4 ID X 5/8 OD FLAT WASHER 4 HEX HEAD SCREW 10 X 1/2 BLACK 4 BL48G-1 Models Only B101586-4-0112 Page 19

Inhaltszusammenfassung zur Seite Nr. 20

in-ground poSt ASSEmbly The gas supply line should be trenched at least 10 inches NOTICE: Assemble and install patio base before assem- below the surface of the ground to prevent damage from dig- bling grill. ging. CAUTION: The gas supply line must be regulated (In the case of Natural gas that means connected after your The SS48G and BL48G In-Ground Posts are only for use with gas meter and regulator) and that you have an easily acces- Broilmaster Gas Grills. Before proceeding with installati


Ähnliche Anleitungen
# Bedienungsanleitung Kategorie Herunterladen
1 Broilmaster B101652 Handbuch Gasgrill 179
2 Broilmaster B100847-1-0109 Handbuch Gasgrill 52
3 Broilmaster BHAX-1 Handbuch Gasgrill 22
4 Broilmaster BL26P-1 Handbuch Gasgrill 15
5 Broilmaster BBA-1 Handbuch Gasgrill 47
6 Broilmaster BDA-1 Handbuch Gasgrill 0
7 Broilmaster BPB26-1 Handbuch Gasgrill 1
8 Broilmaster BP48-1 Handbuch Gasgrill 0
9 Broilmaster BL48G-1 Handbuch Gasgrill 2
10 Broilmaster BHA-1 Handbuch Gasgrill 1
11 Broilmaster BRB-1 Handbuch Gasgrill 2
12 Broilmaster B101652 Handbuch Gasgrill 5
13 Broilmaster BBA-1 Handbuch Gasgrill 4
14 Broilmaster BHAX-1 Handbuch Gasgrill 2
15 Broilmaster BL26P-1 Handbuch Gasgrill 1
16 12Volt Olympus Visera PEF-V Handbuch Gasgrill 6
17 2JANE iPAQ Mobile Media Companion rz1715 Handbuch Gasgrill 3
18 2JANE Tektronix Upgrade Kit Z340FX Handbuch Gasgrill 1
19 2nd Ave. DVD-V7200 Handbuch Gasgrill 0
20 2nd Ave. Canon imageRUNNER 0023W934 Handbuch Gasgrill 1