Inhaltszusammenfassung zur Seite Nr. 1
MOTOROLA S10-HD
Quick Start Guide
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
Congratulations Your MOTOROLA S10-HD Stereo Bluetooth® Headphones take music to the next level. We’ve crammed all of the main features of your headphones into this handy guide, and in a matter of minutes we’ll show you just how easy your headphones are to use. So go on, check it out. More information On the web: www.motorola.com/support Caution: Before using your headset for the first time, please read the important Safety, Regulatory & Legal information at the back of this guide. Congrat
Inhaltszusammenfassung zur Seite Nr. 4
Your headphones the important parts Power and Status Light (underneath back) Õ Forward \ Play/Pause Ô Back Microphone MicroUSB Charging Port (on back) 9 Volume Up Ear Speakers Ï Volume Down Call 2 Your headphones
Inhaltszusammenfassung zur Seite Nr. 5
Charge it let’s get you up and running Status Light Red = charging Blue = fully charged While your headphones are charging, you won’t be able to use them. After charging, be sure to close the flap that covers your charging port. Note: Your battery is designed to last the life of your product. It should only be removed by a recycling facility. Any attempt to remove or replace your battery will damage your headphones. Charge it 3
Inhaltszusammenfassung zur Seite Nr. 6
Basics a few essentials to get you started Turn on & off Power Press and hold to turn on/off. Wear it Use both hands to gently rotate the headphones over your head, place ear hooks over your ears, and insert the speakers into your ears for a snug fit. 4 Basics
Inhaltszusammenfassung zur Seite Nr. 7
When fitted properly, the back of your headphones normally “float” over your neck. Tip: Try out all the supplied ear cushions to get a comfortable fit and optimal performance. Basics 5
Inhaltszusammenfassung zur Seite Nr. 8
Pair & connect connect and go Pair & connect with your phone 1 Turn off any Bluetooth devices previously paired with your headphones. 2 Turn on the Bluetooth feature on your phone. 3 Turn on your headphones (see “Turn on & off” on page 4). The status light becomes steadily lit in blue. Note: When prompted for the passkey, enter 0000. When connected, you see the status light rapidly flash in blue and red. For daily use, make sure your headphones are turned on, and your phone’s Bluetooth
Inhaltszusammenfassung zur Seite Nr. 9
Test your connection 1 Ensure your headphones are turned on. 2 Play music on your phone. If connected for music, you hear it on the headphones. 3 Dial a phone number and press the Call/ Send key. If connected for calls, you hear ringing on the headphones. Note: To pair your headphones again, press and hold the (power) key until the status light becomes steadily lit in blue. Pair & connect 7
Inhaltszusammenfassung zur Seite Nr. 10
Listen to music when music is what you need Note: Some features are phone/network dependent. Control your tunes Use the music buttons on your headphones to control music playback. To... play music Press Å. pause/resume Press Å. music go to next song Press Ä. fast-forward song Press and hold Ä. rewind song Press and hold Ã. go to previous song Press Ã. stop music Press and hold Å. 8 Listen to music
Inhaltszusammenfassung zur Seite Nr. 11
Crank it up Press 9 (to increase) and Ï (to decrease) buttons to adjust the volume. Note: The volume setting on your phone may impact volume on your headphones. On a call? When a call is active, your music either pauses or is silenced. When the call ends, music resumes playing. Listen to music 9
Inhaltszusammenfassung zur Seite Nr. 12
Calls it’s good to talk Note: Some features are phone/network dependent. To... answer call Press . reject call Press and hold 9 or Ï until you hear a tone. make a voice Press and you hear a dial call tone. Follow prompts to make call. redial last call Press and hold until you hear a tone. mute or Press Å. unmute a call end a call Press . 10 Calls
Inhaltszusammenfassung zur Seite Nr. 13
Status light know your headphones If status light your headphones are... shows... three blue powering on/off flashes steady blue in pairing mode rapid blue/red connecting to your phone flashes quick blue receiving or making a call flash slow blue on a call pulse slow red call muted pulse Status light 11
Inhaltszusammenfassung zur Seite Nr. 14
If status light your headphones are... shows... slow blue in standby (not on a flash call—connected to phone) slow red idle (not connected to a flash phone) steady red trying to connect to your phone quick purple playing/pausing music flash quick red stopping music flash slow purple music playing pulse 12 Status light
Inhaltszusammenfassung zur Seite Nr. 15
If status light your headphones are... shows... very quick in a low battery state red flash (and (need recharge) repeating short tones) Note: The status light stops flashing to conserve power after 20 minutes on a call or of inactivity, but the headphones remain on. The status light is reactivated by pressing the (power) key or by certain changes in headphone activity. Status light 13
Inhaltszusammenfassung zur Seite Nr. 16
Got an iPod®? let’s get them together Listen to your iPod wirelessly with your headphones and the Motorola D670 Bluetooth Adapter for iPod. 1 Turn off any Bluetooth devices previously paired with your headphones. 2 Turn headphones off. Turn on by pressing the (power key) and holding until the status light is steadily lit in blue. 3 Turn on your iPod and place in pause mode. 4 Connect your D670 to your iPod. 5 Press your iPod’s Play/Pause button. When the D670’s status light begins to pu
Inhaltszusammenfassung zur Seite Nr. 17
Tips & tricks a few handy hints Reconnect with your phone To reconnect your headphones to your phone: � Press to reestablish handsfree-phone connection and make/receive calls. � Press Å to reestablish streaming music connection and restart music. Reset to factory setting Caution: This action erases all pairing information stored in your headphones. Press and hold the (power) and 9 keys while headphones are on until the status light is steadily lit in blue. Tips & tricks 15
Inhaltszusammenfassung zur Seite Nr. 18
Outdoor use To help you avoid choppy or distorted music in your headphones: � Position your phone close to and within line of sight of your headphone’s internal antenna (located in the base behind your head). � Do not place your phone in your front pocket or other location that can obscure its signal connection to the headphone’s antenna. � If your choice of phone location doesn’t work, try moving it closer to the headphones or turning it. 16 Tips & tricks
Inhaltszusammenfassung zur Seite Nr. 19
Problems? we’ve got solutions My headphones will not enter pairing mode Make sure that any devices previously paired with your headphones are turned off. If the status light is not steadily lit in blue, turn off both the other device and headphones, wait 10 seconds, then turn headphones back on by pressing and holding the (power) key until the status light becomes steadily lit in blue. My phone doesn't find my headphones when searching Make sure the status light on your headphones is st
Inhaltszusammenfassung zur Seite Nr. 20
My headphones worked before but now they're not working Make sure your phone is on and the Bluetooth feature is turned on in your phone. If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature and pair your phone and headset again (see “Turn on & off” on page 4). 18 Problems?
