Inhaltszusammenfassung zur Seite Nr. 1
VISTA-128FBP
VISTA-250FBP
Commercial Fire and Burglary
Partitioned Security Systems
with Scheduling
User Guide
K0377V2 7/09 Rev. B
Inhaltszusammenfassung zur Seite Nr. 2
– 2 –
Inhaltszusammenfassung zur Seite Nr. 3
TABLE OF CONTENTS SYSTEM OVERVIEW ............................5 Using the ✴ READY Key .................28 General .......................................................5 DISPLAYING ALL ZONE A Partitioned System ..................................5 DESCRIPTORS.................................29 Zones..........................................................6 Fire Protection ............................................6 Using the ✳ READY Key ......................29 Burglary Protection
Inhaltszusammenfassung zur Seite Nr. 4
PANIC KEYS ....................................... 43 FIRE ALARM SYSTEM ........................58 Using Panic Keys .....................................43 In Case Of Fire Alarm...............................58 Silencing a Fire Alarm ..............................58 RELAY CONTROL............................... 44 Event Display Lock...................................59 General Information..................................44 Fire Drill Test (Code + # + 69)..................59 Executing...
Inhaltszusammenfassung zur Seite Nr. 5
System Overview General Congratulations on your ownership of a Honeywell partitioned Security System. You've made a wise decision in choosing it, for it represents the latest in security protection technology today. Honeywell is the world's largest manufacturer of security systems and millions of premises are protected by Honeywell systems. This system offers you three forms of protection: burglary, fire and emergency. To realize the system's full potential, it is important that you fe
Inhaltszusammenfassung zur Seite Nr. 6
System Overview (cont’d) Zones Your system's sensing devices have been assigned to various "zones." For example, the sensing device on your Entry/Exit door may have been assigned to zone 001, sensing devices on windows in the master bedroom to zone 002, and so on. These numbers will appear on the display, along with an alpha descriptor for that zone (if programmed), when an alarm or trouble condition occurs. Fire Protection The fire protection portion of your security system (if used)
Inhaltszusammenfassung zur Seite Nr. 7
System Overview (cont’d) Carbon Monoxide Protection Carbon monoxide (CO) protection is available with your system using the 5800CO Carbon Monoxide Detector. The 5800CO is a 3V battery powered wireless Carbon Monoxide Detector used with wireless alarm systems that support 5800 series devices. Carbon monoxide gas is a highly poisonous gas which is released when fuels are burned. It is invisible, has no smell and is therefore impossible to detect with the human senses. We strongly sugg
Inhaltszusammenfassung zur Seite Nr. 8
System Overview (cont’d) Device Timers The system provides up to 20 "timers" that can be used to control various devices, such as lights or appliances. These timers are similar in concept to the individual appliance timers that might be purchased at a department store. The devices that can be controlled are programmed into the system by the installer. Up to 96 of these devices can be programmed. Refer to the Programming Device Timers section for procedures. To Access another Partition
Inhaltszusammenfassung zur Seite Nr. 9
System Overview (cont’d) Self-Help Feature Abbreviated user instructions are built into the system that can be easily viewed on the alpha keypad's message display screen. This feature will prove particularly useful if this manual is not conveniently accessible when you need to perform a system procedure with which you are not familiar. To view the abbreviated instructions: Simply press and hold down the function key of interest until the description starts to appear (about 5 seconds)
Inhaltszusammenfassung zur Seite Nr. 10
About The Keypads General IMPORTANT: If the keypad beeps rapidly upon entering the premises, it indicates that an alarm has occurred during your absence. LEAVE the premises IMMEDIATELY and CONTACT THE POLICE from a safe location nearby. Your keypads allow you to control all system functions. The keypads feature a telephone style (digital) keypad and a Liquid Crystal Display (LCD) that shows the nature and location of all occurrences. Keypad display back lighting is programmable to alw
Inhaltszusammenfassung zur Seite Nr. 11
Functions of the Keypad ARMED OFF AWAY STAY 1 2 3 READY MAX TEST BYPASS POWER 4 5 6 ALARM SILENCED INSTANT CODE CHIME 7 8 9 SUPV READY TROUBLE 0 # Primary Fire Keypad 6160CR-2 IMPORTANT! When using the keypad to enter codes and commands, sequential key depressions must be made within 3 seconds of one another. If 3 seconds elapse without a key depression, the entry is aborted and must be repeated from its beginning. – 11 – 6160CR2-001-V0
Inhaltszusammenfassung zur Seite Nr. 12
Functions of the Keypad (cont’d) ARMED 1 OFF 2 AWAY 3 STAY READY MAX TEST BYPASS 4 5 6 7 INSTANT 8 CODE 9 CHIME READY 0 # Burglary Keypad 6160 IMPORTANT! When using the keypad to enter codes and commands, sequential key depressions must be made within 3 seconds of one another. If 3 seconds elapse without a key depression, the entry is aborted and must be repeated from its beginning. – 12 – 6160-00-001-V0
Inhaltszusammenfassung zur Seite Nr. 13
Functions of the Keypad (cont’d) ALPHA DISPLAY WINDOW: A 2-line, 4 MAX: Arms in manner similar to 32-character Liquid Crystal Display (LCD). AWAY mode, but eliminates the entry Displays protection point identification and delay period, thus providing maximum system status, messages, and user protection. An alarm will occur instructions. immediately upon opening any protection point, including entry delay zones. 1 OFF : Disarms the burglary portion of 5 TEST : Tests the syste
Inhaltszusammenfassung zur Seite Nr. 14
Functions of the Keypad (cont’d) LED ALARM INDICATOR: (RED) Lit ✳ READY : When depressed prior to when any Fire Alarm exists in the system. arming the system, the keypad will display LED SILENCED INDICATOR: (AMBER) all open protection zones within the Lit when CODE + OFF is pressed. keypad's home partition. This key is also LED SUPV INDICATOR: (AMBER) Lit used to display all zone descriptors that when a supervisory condition exists in the have been programmed for your system, by
Inhaltszusammenfassung zur Seite Nr. 15
Entry/Exit Delays General Information Your system has installer-programmed time delays, known as exit delay and entry delay. Whenever you arm your system, exit delay gives you time to leave through the designated exit door without setting off an alarm. Exit delay begins immediately after entering any arming command, and applies to all modes of arming protection. If programmed, a slow beeping will sound throughout the exit delay period. Entry Delay gives you time to disarm the system wh
Inhaltszusammenfassung zur Seite Nr. 16
Security Codes and Authority Levels General Information At the time of installation, you were assigned an authority level and a personal four-digit security code, known only to you and yours. The security code must be entered when arming and disarming the system. The authority level defines the system functions that you can perform. As an additional safety feature, other users that do not have a need to know your code can be assigned different security codes, and each user can be given
Inhaltszusammenfassung zur Seite Nr. 17
Security Codes and Authority Levels (cont’d) Authority Levels Authority levels define the system functions a particular user can perform. Depending on the authority assigned to you, there are certain system functions you may be prohibited from performing. In summary, there are six authority levels, each having certain system restrictions as shown below. Level 1 Master: Can perform all system functions in assigned partitions, and can add, delete or change Manager and Operator level user
Inhaltszusammenfassung zur Seite Nr. 18
Security Codes and Authority Levels (cont’d) General Rules on Authority Levels and Changes • A user may not delete or change the user code of the SAME or HIGHER authority than which he is assigned. • A user may only ADD users to a LOWER authority level. • A user may assign access codes only to those partitions to which the user adding the code has access. (Ex. a user with access to only partition 1 cannot assign codes in partition 2.) • The only way to assign a user's authority level i
Inhaltszusammenfassung zur Seite Nr. 19
Security Codes and Authority Levels (cont’d) To Add a User IMPORTANT: Temporary users should not be shown how to use any system function they do not need to know (e.g. bypassing protection zones). CODE 1. Enter Master or Manager code and press the 8 key. 2. Enter the new user's 3-digit User Number (002-250). 3. Enter 4-digit security code for that user. The following prompts will appear. Enter 1 to add a new user code. Entering 0 will ADD NEW USER? change the existing user's co
Inhaltszusammenfassung zur Seite Nr. 20
Security Codes and Authority Levels (cont’d) If you as a user have access to other partitions, the MULTI-ACCESS ? keypad will prompt for ability of this new user to 0 = NO , 1 = YES access (GOTO) those partitions. Press 0 (NO) or 1 (YES). If no, the system activates this user code and exits “Add a User” mode. If yes, the keypad prompts for the Global Arm option for this user. Press 1 (YES) if this user will be allowed to try to GLOBAL ARM ? arm more than one partition at the same ti
