Bedienungsanleitung Bosch Appliances DINION 4000 AN

Inhaltszusammenfassung zur Seite Nr. 1

Camera Menus
DINION 4000 AN
en Quick Operation Guide

Inhaltszusammenfassung zur Seite Nr. 2

Inhaltszusammenfassung zur Seite Nr. 3

Analog Camera Menus Setup menu | en 3 1Setup menu Press the center button of the control pad to access the SETUP menu. Set Menu – Press the up or down buttons to move the cursor through the menus. – Press the right or left buttons to change values. – When the symbol is shown, press the center button to select an item or open a submenu. Navigation items at the bottom of the screen – To move to the continuation of a menu, select NEXT. – To return to the previous menu, select BACK or RETURN. –

Inhaltszusammenfassung zur Seite Nr. 4

4 en | Setup menu Analog Camera Menus 1.1 Main menu LENS Iris setting SHUTTER/AGC Auto and manual exposure control WHITE BAL White balance setting BACKLIGHT Backlight compensation setting PICT ADJUST Image adjustment setting DYN Dynamic range setting MOTION DET Video motion detection setting PRIVACY Privacy masking setting DAY/NIGHT Day/Night setting DNR Digital noise reduction CAMERA ID Camera identification SYNC Synchronization mode setting LANGUAGE Language setting CAMERA RESET Restores all f

Inhaltszusammenfassung zur Seite Nr. 5

Analog Camera Menus Setup menu | en 5 1.1.2 Shutter/AGC (Automatic Gain Control) menu SHUTTER/AGC AUTO HIGH LUMINANCE MODE SHUT+AUTO IRIS, AUTO IRIS BRIGHTNESS 0 - 255 RETURN LOW LUMINANCE MODE AGC, OFF BRIGHTNESS x0.25, x0.5, x0.75, x1.0 RETURN MANUAL MODE SHUT+AGC SHUTTER 1/60, 1/120, 1/250, 1/500, 1/1000, /2000, 1/4000, 1/10000 (NTSC) 1/50, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 (PAL) AGC 6, 12, 18, 24, 30, 36, 42, 44.8 RETURN Bosch Security Systems Quick Operation Manual

Inhaltszusammenfassung zur Seite Nr. 6

6 en | Setup menu Analog Camera Menus 1.1.3 White balance menu WHITE BAL ATW SPEED 0 - 255 DELAY CNT 0 - 255 ATW FRAME x0.5, x1.0, x1.5, x2.0 ENVIRONMENT INDOOR, OUTDOOR RETURN PUSH USER1 B-GAIN 0 - 255 R-GAIN 0 - 255 RETURN USER2 B-GAIN 0 - 255 R-GAIN 0 - 255 RETURN ANTI CR MANUAL LEVEL 0 - 255 RETURN PUSH LOCK – ATW (Auto Tracking White balance) and PUSH (Full pull-in: 1,800 K to 10,500 K) continuously analyze color temperature. – Use ANTI CR (Anti Color Rolling) when certain types of flu

Inhaltszusammenfassung zur Seite Nr. 7

Analog Camera Menus Setup menu | en 7 1.1.4 Backlight menu BACKLIGHT OFF BLC HLC – Use BLC (Back Light Compensation) to see a dark object in front of a bright background. – Use HLC (High Light Compensation) to darken highlights and avoid image wash-out (for example, car headlights). 1.1.5 Picture adjust menu PICT ADJUST MIRROR ON, OFF BRIGHTNESS 0 - 255 CONTRAST 0 - 255 SHARPNESS 0 - 255 HUE 0 - 255 GAIN 0- 255 RETURN 1.1.6 Dynamic range setting menu DYN OFF ON LUMINANCE LOW, MID, HIGH CONTR

Inhaltszusammenfassung zur Seite Nr. 8

8 en | Setup menu Analog Camera Menus 1.1.7 Motion detection menu MOTION DET OFF ON DETECT SENSE 0 - 127 BLOCK DISP OFF, ON, ENABLE MONITOR AREA OFF, ON AREA SEL 1 - 4 TOP 0 - 244 (NTSC), 288 (PAL) BOTTOM 0 - 244 (NTSC), 288 (PAL) LEFT 0 - 474 (NTSC), 468 (PAL) RIGHT 0 - 474 (NTSC), 468 (PAL) RETURN – The ENABLE function sets the regions/blocks where motion detection does not work. – To exit the BLOCK DISP ENABLE function, press straight down on the set button for a longer time. 1.1.8 Privacy

Inhaltszusammenfassung zur Seite Nr. 9

Analog Camera Menus Setup menu | en 9 Area selection for motion or privacy masks Select area 1, 2, 3 or 4 (8). – Top: extend or reduce upper limit of the detection area. – Bottom: extend or reduce bottom limit of the detection area. – Left: extend or reduce left limit of the detection area. – Right: extend or reduce right limit of the detection area. TOP reduce RIGHT extend LEFT RIGHT 1 1 BOTTOM 1.1.9 Day/night menu DAY/NIGHT AUTO BURST OFF, ON DELAY CNT 0 - 255 DAY->NIGHT 0 - 255 NIGHT->DAY 0

Inhaltszusammenfassung zur Seite Nr. 10

10 en | Setup menu Analog Camera Menus 1.1.10 Digital noise reduction menu DNR DNR MODE OFF, Y, C, Y/C Y LEVEL 0 - 15 C LEVEL 0 - 15 RETURN 1.1.11 Camera identification menu CAMERA ID OFF ON RETURN When ON is selected, a virtual keyboard appears on the screen. Use the control pad to move to the character you want and select it. Repeat this to enter the camera ID you desire. You can enter up to 52 characters. 1.1.12 Synchronization menu SYNC. INT LL PHASE 0 - 524 (624) RETURN Line-Lock (LL) i

Inhaltszusammenfassung zur Seite Nr. 11

Inhaltszusammenfassung zur Seite Nr. 12

Bosch Security Systems www.boschsecurity.com © Bosch Security Systems, 2013