Inhaltszusammenfassung zur Seite Nr. 1
OWNER’S GUIDE
INSTALLATION GUIDE
Video Multi-Control Unit
MODEL MCB1000
Inhaltszusammenfassung zur Seite Nr. 2
Table of Contents Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 FCC No
Inhaltszusammenfassung zur Seite Nr. 3
Limited One-Year Warranty For a period of ONE YEAR from the date of purchase, your authorized dealer to obtain the service charge for Directed Electronics, Inc. ("DIRECTED") promises to the your unit. original purchaser to repair or replace, free of cost, TO THE MAXIMUM EXTENT ALLOWED BY LAW, ALL with a comparable reconditioned model any VIDEO MULTI-CONTROL UNIT (hereafter the "UNIT”), which WARRANTIES, INCLUDING BUT NOT LIMITED TO proves to be defective in workmanship or material EXPRESS WARR
Inhaltszusammenfassung zur Seite Nr. 4
Safety Instructions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFERENCE, USE ONLY THE INCLUDED HARDWARE. DIRECTED ELECTRONICS, INC. DISCLAIMS ANY LIABILITY FOR ANY BODILY INJURY, INCLUDING FATALITIES, OR PROPERTY DAMAGE THAT MAY RESULT FROM ANY IMPROPER OR UNINTENDED USES OF THIS PRODUCT. DO NOT MAKE MODIFICATIONS THAT WILL COMPROMISE ANY OF THE VEHICLES SAFETY EQUIPMENT. M
Inhaltszusammenfassung zur Seite Nr. 5
Important Safeguards 1. It is dangerous for the vehicle operator to 5. Operate the system in a safe manner. watch the video while driving and, in most Excessively high volume levels that impair cases, it is illegal for the vehicle operator your ability to hear noises from outside to use a Mobile Video system while driv- the vehicle can be a hazard to yourself and ing. Please be a safe driver. Any viewing by other motorists. the driver during vehicle operation could 6. Before attempting to make a
Inhaltszusammenfassung zur Seite Nr. 6
Features The MCB1000 Multi-Controller Module is The universal IR remote can command any or all designed to be the centerpiece of a Mobile sources from each of the systems monitors. Multi-Media System. The Directed ESP/ESP2 security systems can be With AV inputs for up to four sources (with integrated with on-screen programming and TVM300 TV tuner) and three AV outputs it can trigger information operate as three separate video systems at the same time. FEATURES ACCESSORIES Infrared remote c
Inhaltszusammenfassung zur Seite Nr. 7
Universal Remote Control REMOTE CONTROL OPERATION 1. MAIN POWER - Turns power to the MCB1000 on/off. 2. PWR/SOURCE - Turns monitor power on/off and changes the video source. 3. FM MOD - Turns the power to the RFM100 FM modulator on/off if connected to the MCB1000 FM modulator control output. 4. ZONE BUTTONS - Selects which monitor zone of the MCB1000 the remote control will operate. 5. MENU/ADJUST BUTTONS - Accesses the setup menu and hardware programming menus for the MCB1000. NOTE: Refer to th
Inhaltszusammenfassung zur Seite Nr. 8
Basic Operation The RC100 can control the functions of the MCB AUDIO THROUGH VEHICLE 1000 zone monitors, the TVM300 TV tuner, the SOUND SYSTEM VC2010 VCR, and the VC2050 VCR. Only available with the RFM100 connected. To operate a specific monitor, the remote con- Select the zone that the RFM100 is connected to. Press the FM MOD (3) trols zone button (4) for that monitor must first button. Set the vehicles radio to the be selected. correct frequency and the audio from that source will be hear
Inhaltszusammenfassung zur Seite Nr. 9
Press again to resume normal tape VCR CONTROLS BUTTONS playback The VCR control buttons (9) will operate Press repeatedly when tape is paused Directed video's VC2010 and VC2050 Video to advance one frame at a time. Press and hold when tape is paused Cassette Recorders for three seconds to activate slow PWR button - Turns the VCR power on/off motion playback RR button ON-SCREEN PROGRAMMING Press in stop mode to fast rewind the tape. The MCB1000 hardware functions and on-screen Press
Inhaltszusammenfassung zur Seite Nr. 10
the FM modulator on/off. NO FM MODULATOR - FM modulator control is defeated. This FM Modulator function only applies when the RFM100 is connected. ANTENNA TV Select to choose Antenna or Cable input to TVM300. Select ANTENNA TV when the TVA10 antenna is con- nected to the TVM300. Select CATV when using a cable TV connection to the TVM300. CATV STD Choose between three types of cable TV setups. CATV STD - standard cable system for cable-ready TV's. CATV HRC - for non-cable ready
Inhaltszusammenfassung zur Seite Nr. 11
ing location. Note the location of the 7. Verify that the TVM300 is secured and rein- female 20-pin connector. stall the MCB1000 module cover. 8. Complete the installation/reinstallation of the MCB1000. Verify all connections are correct according to the instructions 9. Be sure to attach the TV antenna, then test the system operation. TV RECEPTION WARNING Television reception in an automobile is con- stantly affected due to vehicle movement around obstructions and high-energy sources. 4. Positi
Inhaltszusammenfassung zur Seite Nr. 12
Wire and Cable Connections 1. Audio out - Use these outputs for stereo 100 power on/off by the ignition switch or audio signal to IR wireless headphones or an the system operator can turn the FM mod- FM modulator. The audio zones correspond ulator on/off by remote control. to the same monitor zones so any time a 5. Infrared input - This is a 3.5mm pin plug source is changed the audio will follow. for a remote IR eye. The optional IR 100 2. Monitor zones - These eight-pin DIN plugs Infrared rem
Inhaltszusammenfassung zur Seite Nr. 13
Capabilities Diagram. 1. Indicator Led - Indicates power on/off 4. TV antenna connector - This is a standard F-type TV antenna connector. It can be 2. Power connector: connected to with Directed Video's TVA 10 RED - Accessory power. Connect to telescoping antenna for broadcast TV or a (+) 12 volt wire that turns on/off standard cable TV connection. with the ignition. 5. Audio level controls - These are YELLOW - Constant power. Connect to adjustable source audio input level con- (+) 12 volt
Inhaltszusammenfassung zur Seite Nr. 14
System Capabilities Diagram 14 © 2001 Directed Electronics, Inc.
Inhaltszusammenfassung zur Seite Nr. 15
Specifications MAIN UNIT Product Multi-Zone Audio/Video/TV system Power requirement 12.5 Vdc (11-15Vdc) Power consumption 700 mA in operation/60 mA standby Audio input 1 volt rms max Audio output 1.0 volt rms DIN/RCA Video input 1 volt p-p 75 ohms Video output 1 volt p-p 75 ohms Dimensions 19.7cm x 13cm (7.75” x 5.125”) Temp range 35-115 degrees farhenhiet UNIVERSAL REMOTE CONTROL Power source 3 volts DC 2x AAA Batteries Infrared range App. 2M (6.5 ft) © 2001 Directed Electronics, Inc. 15
Inhaltszusammenfassung zur Seite Nr. 16
The company behind this system is Directed Electronics, Inc. Since its inception, Directed has had one purpose, to provide consumers with the finest vehicle security, car stereo products, rear seat entertainment, and accessories available. The recipient of more than 20 patents in the field of advanced electronic technology, Directed is ISO 9001 registered. Quality Directed Electronics products are sold and serviced throughout North America and around the world. Call (800) 274-0200 for more infor
