Inhaltszusammenfassung zur Seite Nr. 1
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
ITEM 68853
18 VOLT CORDLESS
IMPACT
DRIVER
Visit our website at: http://www.harborfreight.
Inhaltszusammenfassung zur Seite Nr. 2
SAFETY SETUP OPERATION MAINTENANCE Table of Contents Safety ......................................................... 2 Maintenance .............................................. 10 Specifications ............................................. 7 Parts List and Diagram .............................. 11 Setup .......................................................... 7 Warranty .................................................... 12 Operation .................................................... 8 W
Inhaltszusammenfassung zur Seite Nr. 3
Personal safety 1. Stay alert, watch what you are doing and use 4. Remove any adjusting key or wrench common sense when operating a power tool. before turning the power tool on. Do not use a power tool while you are tired A wrench or a key left attached to a rotating part or under the influence of drugs, alcohol or of the power tool may result in personal injury. medication. A moment of inattention while operating 5. Do not overreach. Keep proper footing and power tools may result in se
Inhaltszusammenfassung zur Seite Nr. 4
SAFETY SETUP OPERATION MAINTENANCE Battery tool use and care 1. Recharge only with the charger specified by 3. When battery pack is not in use, keep it away the manufacturer. A charger that is suitable from other metal objects, like paper clips, for one type of battery pack may create a risk coins, keys, nails, screws or other small metal of fire when used with another battery pack. objects, that can make a connection from one terminal to another. Shorting the battery 2. Use power tools onl
Inhaltszusammenfassung zur Seite Nr. 5
9. This product is not a toy. chemically treated lumber Keep it out of reach of children. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your 10. People with pacemakers should consult their exposure to these chemicals: work in a well ventilated physician(s) before use. Electromagnetic fields in area, and work with approved safety equipment, such close proximity to heart pacemaker could cause as those dust masks that are specially desi
Inhaltszusammenfassung zur Seite Nr. 6
SAFETY SETUP OPERATION MAINTENANCE Grounding TO PREVENT ELECTRIC SHOCK AND DEATH FROM INCORRECT GROUNDING WIRE CONNECTION: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the Charger. Do not use the Charger if the power cord or plug is damaged. If damaged, have it repaired by a service facility before use. If the plug will not fit the outlet, have a proper outlet installed by a qualifi
Inhaltszusammenfassung zur Seite Nr. 7
Specifications 120V~, 60Hz Input 7.2-24VDC Output Charger 1 Hour Charge Time (SKU 68859, included) 18V, 1500mAh, NiCd Battery Type (SKU 68860, included) Impacts 0-3000 BPM (Blows Per Minute) Max. Torque 700 in-lb Setup - Before Use: Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Note: For additional information regarding the parts listed in the following pages, refer to Pa
Inhaltszusammenfassung zur Seite Nr. 8
SAFETY SETUP OPERATION MAINTENANCE Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Tool Set Up TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Release the Trigger and remove the Battery Pack before adjusting tool or installing accessories. WARNING! Do not install the Battery Pack 3. Pull Collar (11-1) forward, insert bit into Anvil and until AFT
Inhaltszusammenfassung zur Seite Nr. 9
Work Piece and Work Area Set Up 1. Designate a work area that is clean and well-lit. 2. Secure loose work pieces using a vise or clamps The work area must not allow access by children (not included) to prevent movement while working. or pets to prevent distraction and injury. 3. There must not be objects, such as utility lines, nearby that will present a hazard while working. General Operating Instructions 1. Slide the Direction Switch (which should initially 3. The Impact Driver has variable
Inhaltszusammenfassung zur Seite Nr. 10
SAFETY SETUP OPERATION MAINTENANCE Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Turn the Power Switch of the tool off and remove its Battery Pack before performing any inspection, maintenance, or cleaning procedures. TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected
Inhaltszusammenfassung zur Seite Nr. 11
Parts List and Diagram PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REP
Inhaltszusammenfassung zur Seite Nr. 12
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installatio
