Bedienungsanleitung Chief Manufacturing Truss Pitch-Adjustable Mount TPP

Inhaltszusammenfassung zur Seite Nr. 1

I N S T R U C T I O N M A N U A L
Truss
Pitch-Adjustable (TPP) Mount
The Truss Pitch-Adjustable (TPP) mount is a perfect
solution exhibit, retail and digital signage applications.
The mount is quick, easy and versatile.
The TPP accommodates a large range of truss dimen-
sions (up to 14” O.D.), includes security options and pro-
vides flexible feature to achieve a custom installation
installation. The exclusive Q-Latch™ Mounting System
secures the LArge Flat Panel Display with a lockable

Inhaltszusammenfassung zur Seite Nr. 2

Instruction Manual TPP IMPORTANT WARNINGS AND CAUTIONS! • WARNING: A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions. • CAUTION: A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corre- sponding instructions. • WARNING: Improper installation can result in serious personal injury! Make sure that the structural member

Inhaltszusammenfassung zur Seite Nr. 3

Instruction Manual TPP (1) PLATE, back (1) SCREW, pan head, 10-24 (1) PLATE, assembly, pitch-adjustable (4) SCREW, cap, hex head, 5/16-18 X 1/2” (1) PLATE, face (2) NUT, Stover locknut, 3/8-16 (1) FLAG, latching (1) SPACER, Nylon, .38 X .194 X .032” (1) NUT, Nylock, 10-24 (2) WASHER, flat, 3/8” (3) WASHER, VHMW PARTS 2

Inhaltszusammenfassung zur Seite Nr. 4

Instruction Manual TPP INSPECT THE MOUNT stud Latching Flag BEFORE INSTALLING IMPORTANT: Before installing the mount, make sure it has not been damaged during shipping. 1. Carefully inspect the mount for shipping damage. If any dam- age is apparent, call your carrier claims agent and do not con- tinue with the installation of the mount the until carrier has reviewed the damage. 10-24 Nut TPP INSTALLATION Nylon Spacer Assembly Figure 1. Install Flag 1. Install the Nylon spacer on the stud in t

Inhaltszusammenfassung zur Seite Nr. 5

Instruction Manual TPP 6. Install the face plate in the desired position (see Figure 4, Fig- ure 5, Figure 6 and Figure 7) on the pitch-adjustable plate and secure using two 3/8-16 Nylock nuts and washers in any matching set of radial holes slotted to allow slight roll adjust- ment. Figure 4. Vertical Tilt Shown without Back Plate for Clarity Figure 5. Horizontal Tilt Shown without Back Plate for Clarity 3/8-16 Nylock Nuts and Washers Figure 6. Vertical Truss Shown with Back Plate Figure 7. Ho

Inhaltszusammenfassung zur Seite Nr. 6

Instruction Manual TPP Mount the Display 1. Attach included PSB brackets to your display using the instruc- tions included with the PSB package. 2. Make sure no power is supplied to the display and the flag is in the down position before attempting to mount the display. 3. Using two people, slide the display down over the four slots in the face plate of the TPP. Make sure all four Quick Latches (Q- Latches) of the display engage all four slots in the TPP. WARNING: Make sure the flag securing

Inhaltszusammenfassung zur Seite Nr. 7

Instruction Manual TPP Remove the Display WARNING: Make sure the flag securing the display is com- pletely raised at all times except when removing or installing the display. The flag must be all the way up when installing/removing cables. WARNING: Watch for pinch points. Do not put your fingers between movable parts. 1. Unlock the display from the TPP by lowering the flag all the way down to the unlocked position. 4. Using two people, slide the display up and out of the TPP. 6