Inhaltszusammenfassung zur Seite Nr. 1
UNIVERSAL BATTERY
CHARGER
66718
SET Up ANd OpERATING INSTRUCTIONS
®
distributed exclusively by Harbor Freight Tools .
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS mANUAL.
© ®
Copyright 2009 by Harbor Freight Tools . All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form witho
Inhaltszusammenfassung zur Seite Nr. 2
CAUTION, used SAVE THIS mANUAL with the safety Keep this manual for the safety warn- alert symbol, indicates a ings and precautions, assembly, operating, hazardous situation which, if inspection, maintenance and cleaning pro- not avoided, could result in cedures. Write the product’s serial number minor or moderate injury. in the back of the manual (or month and NOTICE is used to year of purchase if product has no num- address practices ber). Keep this manual and the receipt in not
Inhaltszusammenfassung zur Seite Nr. 3
2. Electrical safety moment of inattention while operat- ing power tools may result in serious a. The power plug for this product personal injury. must match the Outlet. Never modify the plug in any way. do b. Use personal protective equip- not use any adapter plugs with ment. Always wear ANSI-approved this product. Unmodified plugs and eye protection. Safety equipment matching outlets will reduce risk of such as NIOSH-approved dust mask/ electric shock. respirator, non-skid safety sho
Inhaltszusammenfassung zur Seite Nr. 4
Charger or these instructions to 3. do not allow the BLACK and REd operate the product. Battery Char- Charger Clips to touch one an- gers are dangerous in the hands of other when the Battery Charger is untrained users. plugged into an electrical outlet. d. maintain the Battery Charger. do not allow the two Charger mag- Check for misalignment or binding nets to touch one another when of moving parts, breakage of parts the Battery Charger is plugged into and any other condition that may
Inhaltszusammenfassung zur Seite Nr. 5
walls. Keep a fire extinguisher and a you to lead, a chemical known to smoke detector in the area. While the State of California to cause charging, frequently monitor the cancer, and birth defects or other Charger and the battery being reproductive harm. Wash hands charged. after handling. (California Health & Safety Code § 25249.5, et seq.) 7. prior to using the Battery Charger, consult with the manufacturer of 13. The warnings, precautions, and the battery being charged for spe- inst
Inhaltszusammenfassung zur Seite Nr. 6
Grounded Tools: Tools with Three double Insulated Tools: Tools prong plugs with Two prong plugs Outlets for 2-prong plug 3-prong plug and Outlet 1. Tools marked “Double Insulated” do 1. Tools marked with “Grounding Re- quired” have a three wire cord and not require grounding. They have a special double insulation system three prong grounding plug. The plug must be connected to a properly which satisfies OSHA requirements grounded outlet. If the tool should and complies with the applicab
Inhaltszusammenfassung zur Seite Nr. 7
3. The smaller the gauge number of the SYmBOLOGY wire, the greater the capacity of the cord. For example, a 14 gauge cord Double Insulated can carry a higher current than a 16 gauge cord. (See Table A.) Canadian Standards Association 4. When using more than one exten- sion cord to make up the total length, Underwriters Laboratories, Inc. make sure each cord contains at least the minimum wire size required. Volts Alternating Current V~ (See Table A.) Amperes 5. If you are using one exte
Inhaltszusammenfassung zur Seite Nr. 8
Freight Tools at 1-800-444-3353 as soon 5. Charger Output magnets (5): Con- as possible. nects to the positive (+) and negative (-) tabs of a battery. (See Figure A.) CHARGER FIGURE A (4) pROdUCT FEATURES GREEN “FULLY CHARGEd” Read the ENTIRE ImpORTANT L.E.d. REd SAFETY INFORmATION “CHARGING” section at the beginning of this L.E.d. manual including all text under RESET BUTTON subheadings therein before set Magnetic up or use of this product. Resting Contacts TO pREVENT AC/dC SERIOUS
Inhaltszusammenfassung zur Seite Nr. 9
case, press the Reset Button one or when the Battery Charger is plugged more times to warm the battery and into an electrical outlet. start the charging process. If after c. Do not allow the two Charger Mag- pressing the Reset Button up to 5 nets (5) to touch one another when times the Red and Green L.E.D.’s the Battery Charger is plugged into continue flashing, this indicates the an electrical outlet. Do not place battery is too old or defective and magnets on metal surfaces or adja-
Inhaltszusammenfassung zur Seite Nr. 10
Ports for charging batteries. Check CHARGER (3) with your local electronics retailer CHARGER for the proper USB charging output OUTpUT mAGNETS cords to be used with the Battery (5) Charger. (See Figure d.) 10. Clean, then store the Universal Bat- FIGURE C tery Charger and its accessories indoors out of children’s reach. BATTERY BEING CHARGER FIGURE d CHARGEd (3) (NOT INCLUdEd) GREEN “FULLY CHARGEd” L.E.d. REd “CHARGING” 5. Connect the Charger Input Cord (2) L.E.d. to the Charger (3). (S
Inhaltszusammenfassung zur Seite Nr. 11
TO pREVENT 1. BEFORE EACH USE, inspect the SERIOUS INjURY general condition of the Universal FROm ACCIdENTAL Battery Charger. Check for loose OpERATION: hardware, misalignment or binding Unplug the AC/dC Adapter (2) of moving parts, cracked or broken from its electrical outlet parts, damaged electrical wiring, and before performing any any other condition that may affect its inspection, maintenance, or safe operation. cleaning procedures. 2. AFTER USE, wipe external surfaces TO pREVEN
Inhaltszusammenfassung zur Seite Nr. 12
TROUBLESHOOTING problem possible Causes Likely Solutions Battery Charger will 1. AC/DC Adapter Input Cord not 1. Check that Cord is plugged in. not start. connected to 120 volt, grounded, electrical outlet. 2. No power at outlet. 2. Check power at outlet. If outlet is unpowered, unplug Battery Charger and check circuit breaker. If breaker is tripped, make sure circuit is right capacity for Charger and circuit has no other loads. 3. Battery is cold or has not been 3. Press Reset Button (s
Inhaltszusammenfassung zur Seite Nr. 13
pARTS LIST & ASSEmBLY dIAGRAm part # description Qty. part # description Qty. 1 AC/DC Adapter Input Cord 1 4 Charger Output Clips 1 set 2 AC/DC Adapter with Cord 1 5 Charger Output Magnets 1 Set 3 Charger 1 3 4 2 1 5 SKU 66718 For technical questions, please call 1-800-444-3353. Page 13
Inhaltszusammenfassung zur Seite Nr. 14
LImITEd 90 dAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this prod- uct is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installat
