Inhaltszusammenfassung zur Seite Nr. 1
User’s Manual
Version 1.1 February 2001
www.behringer.com
ENGLISH
Inhaltszusammenfassung zur Seite Nr. 2
PRO MIXER DX1000 SAFETY INSTRUCTIONS CAUTION: To reduce the risk of electric shock, do not remove the cover (or back). No user serviceable parts inside; refer servicing to qualified personnel. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. This symbol, wherever it appears, alerts This symbol, wherever it appears, alerts you to the presence of uninsulated you to important operating and dangerous voltage inside the enclo- maintenance instru
Inhaltszusammenfassung zur Seite Nr. 3
PRO MIXER DX1000 FOREWORD Dear Customer, Welcome to the team of PRO MIXER users and thank you very much for expressing your confidence in BEHRINGER products by purchasing this unit. It is one of my most pleasant tasks to write this letter to you, because it is the culmination of many months of hard work delivered by our engineering team to reach a very ambitious goal: presenting an outstanding mixer for flexible use in studios, clubs or at home. The task to develop our new PRO MIXER series certa
Inhaltszusammenfassung zur Seite Nr. 4
PRO MIXER DX1000 BLOCK DIAGRAM 4
Inhaltszusammenfassung zur Seite Nr. 5
PRO MIXER DX1000
Two professional high-class microphone channels with peak indicator and effects send facility High-precision phono preamps for bass power and crystal clean sound Ultra-musical 3-band EQ with independent defeat switch on all channels Kill switch attenuates the bass for more creativity Ultra low-noise design comparable to studio-grade consoles Replaceable and high-quality
Inhaltszusammenfassung zur Seite Nr. 6
PRO MIXER DX1000 TABLE OF CONTENTS 1. THE MANUAL ........................................................................................................................7 1.1 Nomenclature.................................................................................................................................. 7 2. PRO MIXER OVERVIEW .......................................................................................................7 2.1 Highly accurate main and PFL peak—reading bargrap
Inhaltszusammenfassung zur Seite Nr. 7
PRO MIXER DX1000 1. THE MANUAL We know that reading manuals can be a bore, and that you are probably impatient to get started with your new DX1000 mixer, if you haven’t already! It is true that with a modicum of knowledge about audio equipment you could get up and running successfully, but chances are you will not be able to exploit the full potential of your DX1000 (or yourself) until you have some of its more advanced features explained. Please, please at least read through all the text in thi
Inhaltszusammenfassung zur Seite Nr. 8
PRO MIXER DX1000 2.1 Highly accurate main and PFL peak—reading bargraph meters The main output level is constantly monitored by a pair of highly accurate main bargraph meters . In addition, all channels have PFL (Pre-Fader-Listen) . This means that you can see (on a separate PFL bargraph meter) and hear (on your headphones and/or monitors) the music you are about to play without disturbing the mix—essential if you want to come in at the same level and in time with the music currently playing. Al
Inhaltszusammenfassung zur Seite Nr. 9
PRO MIXER DX1000 3. MONO INPUT CHANNEL Plug a mic or line source (tape, CD player etc.) into the appropriate MIC or LINE input. Speak or play music at typical volume to check out and set up the channel. The mic pre-amps are of the same quality as those in our award-winning EURODESK studio consoles. These give an incredibly warm, clear and noiseless performance. Mic and line in- puts are on balanced XLR and 1/4" jacks respectively. Balanced operation gives best noise performance. Unbalanced m
Inhaltszusammenfassung zur Seite Nr. 10
PRO MIXER DX1000 3.4 Equalizer The mic channel EQ section comprises three control knobs and one switch. Depressing the LOW CUT switch rolls off the bass end (-18 dB/oct @ 75 Hz). We recommend using this feature with microphones to eliminate “popping” and handling noise. Where loud music is playing, LOW CUT also helps to avoid bass feedback. Separate controls cut and boost TREBLE , MID and BASS frequencies respectively. Use EQ creatively to sweeten the sound of your microphone, or defensively
Inhaltszusammenfassung zur Seite Nr. 11
PRO MIXER DX1000 Channel Input 1 Input 2 3 PHONO 1 CD 1 4 PHONO 2 CD 2 5 PHONO 3 CD 3 6 LINE 1 CD 4 7 LINE 2 TAPE* Tab. 4.1: Stereo channel configuration * Channel 7’s TAPE input is parallel-wired to the TAPE IN on the top panel. Never patch line level devices into your highly sensitive phono inputs. Phono cartridge output is measured in millivolts. Line level signals are of the order of magnitude of a volt. With line levels you are looking at a signal up to 100 times more powerful than the
Inhaltszusammenfassung zur Seite Nr. 12
PRO MIXER DX1000 4.3 Equalizer The channel EQ section comprises three control knobs and two switches. The EQ ON switch activates the tone controls which enable cut and boost of TREBLE , MID and BASS frequencies respectively (see below for specs.) EQ can sweeten or effect a track, with the fading out and in of frequency bands being very popular. When you press the KILL switch the bass EQ is set to maximum attenuation independent of the setting of the bass EQ control. EQ Frequency Range Centre
Inhaltszusammenfassung zur Seite Nr. 13
PRO MIXER DX1000 Take care to ensure that SENSITIVITY is not set too high, otherwise spill from loudspeakers into the mic could trigger the talk over system, and the music volume will just keep going up and down! (You have set up an intermittent negative feedback loop.) Once SENSITIVITY has been set so that talk over is only being activated by speech, it’s time to fine-tune the system with the other two controls again, according to taste. Twin LEDs let you know how your talk over system is beh
Inhaltszusammenfassung zur Seite Nr. 14
PRO MIXER DX1000 This is the first time we have come across any really BIG buttons on the DX1000. At this point it’s worth pointing out that all the smaller switches on your DX1000 are latching. This means they stay down until you hit them again. Big buttons are all non-latching, or momentary in operation. This means that they are only active when your finger (or other appendage) is actually holding them down, like the keys on a MIDI keyboard. These are ideal for executing transformations, as
Inhaltszusammenfassung zur Seite Nr. 15
PRO MIXER DX1000 7. HEADPHONES, MONITORS & PFL 7.1 Monitoring A separate stereo MONITOR output is provided. Level is controlled by a single 60 mm MONITOR stereo fader . The monitor signal is taken directly from the main mix. Engaging PFL anywhere on the board changes the monitor source to PFL. Main fader adjustments will not affect the level of the monitor output—unlike on standard recording consoles where monitor follows the main faders. 7.1.1 PFL in the studio In a studio setup, the monitor
Inhaltszusammenfassung zur Seite Nr. 16
PRO MIXER DX1000 Another way to keep the monitors fixed on PFL is to make sure a PFL button is always left engaged somewhere on the desk. You could simply leave a PFL button depressed on an unused, unassigned channel. If your channel fader is always brought up to +6 dB (i.e. full-on as per usual with you DJ types) then comparing PFL values will give a true indication of relative mix volume between tracks. Now all you have to do in order to achieve a totally professional-sounding volume-consist
Inhaltszusammenfassung zur Seite Nr. 17
PRO MIXER DX1000 10. CONNECTIONS 10.1 PRO MIXER DX1000 connections Follow us on a walk along the rear panel of your PRO MIXER, starting left: Channel inserts. For inserting into the channel signal, pre-EQ and pre-fader. Unbalanced, send and return on a single 1/4" jack socket, wired tip = send (out), ring = return (in) and sleeve = ground/screen. Line input. Balanced 1/4" jack socket, wired tip = hot (+ve), ring = cold (-ve) and sleeve = ground/ screen. Mic input. Balanced XLR, wired pin 1 = gro
Inhaltszusammenfassung zur Seite Nr. 18
PRO MIXER DX1000 Unbalanced use of Balanced use of mono 1/4" jack plugs stereo 1/4" jack plugs Tip = Tip = Signal hot (+ve) Ring = cold (-ve) Sleeve = Ground / Shield Sleeve = Ground / Shield Tip Tip Ring Sleeve Sleeve Strain relief clamp Strain relief clamp For connection of balanced and unbalanced plugs, ring and sleeve have to be bridged at the stereo plug. Balanced use with XLR connectors 2 1 1 2 1 = Ground / Shield 2 = hot (+ve) 3 = cold (-ve) 3 3 Input Output For unbalanced use pin 1 and p
Inhaltszusammenfassung zur Seite Nr. 19
PRO MIXER DX1000 Fig. 10.3: Insert send/return plug 11. CROSSFADER ADJUSTMENT On the main motherboard you can find two potentiometers, which you can adjust with a little screwdriver. These potentiometers are identified as OVERLAP and SLOPE. You can unscrew the bottom of your mixer to reach the main motherboard. Please be aware that the BEHRINGER warranty becomes discretionary when you start disas- sembling your DX1000! Don’t even think of it, if you make much of your warranty privileges. Sorry
Inhaltszusammenfassung zur Seite Nr. 20
PRO MIXER DX1000 Fig. 11.1: Volume curve I (SLOPE potentiometer completely left) Fig. 11.2: Volume curve II (SLOPE potentiometer completely right) 12. SPECIFICATIONS MONO INPUT CHANNELS Mic input Electronically balanced, discrete input configuration Gain +10 to +60 dB Frequency response 10 Hz to 100 kHz, +/-3 dB THD 0.06 % typ. @ -30 dBu, 1 kHz Line input Gain -10 dB to +40 dB Frequency response 10 Hz to 100 kHz, +/-3 dB THD 0.03 % typ. @ 0 dBu, 1 kHz S/N ratio > 80 dB, unweighted 20 12.SPECIFIC
