Inhaltszusammenfassung zur Seite Nr. 1
MultiModem® ZPX
V.92 Internal Modem
Models: MT9234ZPX-UPCI
MT9234ZPX-UPCI-NV
MT9234ZPX-PCIe
MT9234ZPX-PCIe-NV
User Guide
Inhaltszusammenfassung zur Seite Nr. 2
® MultiModem ZPX User Guide MT9234ZPX-UPCI, MT9234ZPX-UPCI-NV, MT9234ZPX-PCIe, MT9234ZPX-PCIe-NV P/N S000414C, Revision C All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from Multi-Tech Systems, Inc. Copyright © 2010 by Multi-Tech Systems, Inc. Multi-Tech Systems, Inc. makes no representation or warranties with respect to the contents hereof and specifically disclaims any implied warranties of merchantability
Inhaltszusammenfassung zur Seite Nr. 3
Contents Contents CHAPTER 1 – DESCRIPTION AND SPECIFICATIONS ............................................................................................. 4 PRODUCT DESCRIPTION .................................................................................................................................................. 4 Features .................................................................................................................................................................
Inhaltszusammenfassung zur Seite Nr. 4
Chapter 1 - Description and Specifications Chapter 1 – Description and Specifications Product Description The Multi-Tech MultiModem ZPX is an internal universal PCI bus card, MT9234ZPX-UPCI or a PCI Express bus card, MT9234ZPX-PCIE. The UPCI card operates in either 3.3 or 5V slot. The PCI Express card operates in a 3.3V slot. The MultiModem provides high-speed data transfer and fax capabilities for small businesses, telecommuters, and SOHO users. It is compatible with the IUT-T V.92 proto
Inhaltszusammenfassung zur Seite Nr. 5
Chapter 1 - Description and Specifications Technical Specifications Category Description Receiver AGC Dynamic Range 43 dB V.92, V.34 enhanced, V.34, V.32bis, V.32, V.22bis, V.22; Bell 212A and 103/113, V.21 Data Compatibility & V.23 Data Format Serial, binary, asynchronous Data Mode V.44; V.42 LAPM, MNP 2-4 Error Correction (ECM) Fax Mode T.30 Annex A & C Data Compression V.42bis & MNP Class 5 V.34, V.17, V.29, V.27, & V.21 Ch. 2 Fax Compatibility Class 1 &1.0 and Class 2, 2
Inhaltszusammenfassung zur Seite Nr. 6
Chapter 2 - Installation Chapter 2 – Installation General Safety ● Use this product only with UL- and CUL-listed computers (U.S.A.) ● To reduce the risk of fire, use only UL-listed 26 AWG (.41mm) or larger telephone wiring. ● Never install telephone wiring during a lightning storm. ● Never install a telephone jack in a wet location unless the jack is specifically designed for wet locations. ● Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnec
Inhaltszusammenfassung zur Seite Nr. 7
Chapter 2 - Installation 4. Click on the next button to start the driver pre-installation. 5. You will be prompted 3 times to confirm the installation of the three necessary drivers. Click the Install button to continue each time. 6. There will be a transitory screen, then the process will complete. Click on the Finish button. 7. Your driver installation is complete. 8. You can now shut down the PC, unplug the power cord and physically install your modem per the instructions found
Inhaltszusammenfassung zur Seite Nr. 8
Chapter 2 - Installation Physically Installing your MultiModem • Installing the MultiModem requires you to open your system. Please consult your system manual in addition to the following instructions. • Turn off your system and unplug it. Failure to do so may result in damage to both the MultiModem and your system. Do not turn on the system until the instructions tell you to do so. • Remove the cover from your system as instructed in the system manual. Before handling the MultiModem ZP
Inhaltszusammenfassung zur Seite Nr. 9
Chapter 2 - Installation Make the External Connections Now connect the MultiModem to the telephone line and, optionally, to your telephone. For voice mail or speakerphone use, you can also connect it to a microphone and an external speaker, headphone, or sound card. The microphone can be used for recording answering machine messages or for speakerphone use. The speaker or headphone can be used for playing back messages or as a speakerphone. PHONE PH O NE LINE LINE MIC IN MIC Optional Voic
Inhaltszusammenfassung zur Seite Nr. 10
Chapter 2 - Installation Manually Installing Drivers If you choose not to use the Windows Installer or have already physically installed your MultiModem ZPX, the following instructions will guide you through the process of installation for the various Windows operating systems. ® The MultiModem MT9234ZPX ships with drivers for each of the following operating systems: Windows Server ® 2008, Windows 7, Vista, XP, 2003, 2000 Server, 2000 Advanced Server, and Linux. This chapter describes the
Inhaltszusammenfassung zur Seite Nr. 11
Chapter 2 - Installation Driver Installation for Windows 7 If you did not use the pre-installer for Windows, this is the process for installing your modem. The following driver installation procedure is based on Windows 7 32-bit Operating System. The Windows 7 64-bit Operating System installs in the same manner. Windows 7 operates differently than the older Microsoft Operating Systems when it is installing drivers, in that it goes out to Internet Windows Update site and searches for the de
Inhaltszusammenfassung zur Seite Nr. 12
Chapter 2 - Installation 3. Update Driver Software – PCI Serial Port screen appears. Select Browse my computer for driver software 4. Insert the product CD that came with your device into the CD-ROM drive. 5. At the Browse for driver software on your computer screen. Click Browse. Browse to the Drivers folder on your on your product CD, then select the Drivers folder. Within the Drivers folder, select Win32bit-Vista-2008-Win7 folder. If you are installing drivers for a Vista 64-bit
Inhaltszusammenfassung zur Seite Nr. 13
Chapter 2 - Installation Click Next. 6. Windows Security ‘Would you like to install this device software?’ screen appears. Click Install. 7. Installing driver software on screen appears. Multi-Tech Systems, Inc. MT9234ZPX User Guide 13
Inhaltszusammenfassung zur Seite Nr. 14
Chapter 2 - Installation 8. When the software for this device has been updated. The Windows screen Multi-Tech 9234ZPX is displayed. Click Close. Continue to the next section for the completion of the installation. Windows 7 Port Installation Immediately after the MultiModem ZPX driver installation is complete, another set of installation wizard screens will appear. With this installation wizard, you will install the port and modem into the computer's operating system and then associa
Inhaltszusammenfassung zur Seite Nr. 15
Chapter 2 - Installation 2. Update Driver Software – PCI Serial Port screen appears. Select Browse my computer for driver software 3. At the Browse for driver software on your computer screen, click on the Browse button to open an Explorer window where you can navigate to the correct drivers folder that matches your operating system. Select that folder and click OK. Example: If you are installing drivers for a Windows 7 64-bit Operating System, you would browse to the Win64bit-Vista-
Inhaltszusammenfassung zur Seite Nr. 16
Chapter 2 - Installation 4. The Windows Security ‘Would you like to install this device software?’ screen appears. Click Install. 5. Installing driver software on screen appears. 6. When the software for this device has been updated. The Windows screen Updated Driver Software is displayed. Click Close. The port is now ready to have a number assigned to it – proceed with the installation instructions found below. 16 Multi-Tech Systems, Inc. MT9234ZPX User Guide
Inhaltszusammenfassung zur Seite Nr. 17
Chapter 2 - Installation Installation of the COM port The Device Manager window will still be open (unless you have closed it – then you will need to open it again) and there is a new entry in Other devices: Multifunction Device. 1. Right-Click on the Multifunction Device in Other devices and a submenu will come up; now click on Update Driver Software. Update Driver Software – Multifunction Device screen appears. 2. Select Browse my computer for driver software and select the fo
Inhaltszusammenfassung zur Seite Nr. 18
Chapter 2 - Installation 3. The Windows Security ‘Would you like to install this device software?’ screen appears. Click the Install button to continue. 4. When the software for this device has been updated, the Updated Driver Software window is displayed. Click Close. The port is now ready to have the modem installed to it – proceed with the installation instructions found below. 18 Multi-Tech Systems, Inc. MT9234ZPX User Guide
Inhaltszusammenfassung zur Seite Nr. 19
Chapter 2 - Installation Installation of the modem The Device Manager window will still be open (unless you have closed it – then you will need to open it again) and there is a new entry in Other devices: MultiTech System’s MT9234ZPX. 1. Right-Click on the MultiTech System’s MT9234ZPX in Other devices and a submenu will come up; now click on Update Driver Software. Update Driver Software – Multifunction Device screen appears. 2. Select Browse my computer for driver software and
Inhaltszusammenfassung zur Seite Nr. 20
Chapter 2 - Installation 3. The Windows Security ‘Would you like to install this device software?’ screen appears. Click the Install button to continue. 4. When the software for this device has been updated, the Updated Driver Software window is displayed. Click Close. You may also close the Device Manager and Control Panel windows. Completion Software installation for the MultiModem ZPX is complete. You may need to configure the modem for your country/region, refer to ‘Configu
