Bedienungsanleitung Yamaha AD8

Inhaltszusammenfassung zur Seite Nr. 1

ANALOG INPUT BOX
MIC/LINE INPUT UNIT
-ML8AB
MIC/LINE INPUT UNIT
-ML8F
AD UNIT -AD8
Owner’s Manual
U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation
© 2003 Yamaha Corporation
WC62520 707IPAPx.x-0xB0 E
Printed in Japan

Inhaltszusammenfassung zur Seite Nr. 2

FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instruct

Inhaltszusammenfassung zur Seite Nr. 3

■ Precautions •Do not place a container with liquid or small metal •For normal ventilation during use, remove the rear of objects on top of this unit. Liquid or metal objects the rack or open a ventilation hole. inside this unit are a fire and electrical shock hazard. •If the airflow is not adequate, the unit will heat up •Do not allow water to enter this unit or allow the unit inside and may cause a fire. to become wet. Fire or electrical shock may result. •This unit has ventilation holes

Inhaltszusammenfassung zur Seite Nr. 4

Thank you for choosing the AI8 analog input box, the AI8-ML8AB/AI8-ML8F mic line input unit, or the AI8-AD8 AD unit, specifically designed for the Yamaha PM1D digital audio mixing system. The AI8 inputs signals to the DSP unit DSP1D/DSP1D-EX engine (controlled via the CS1D control sur- face). Up to ten AI8s can be connected to each DSP1D/DSP1D-EX. Be sure to ask an authorized Yamaha service engineer to install the card and set up the unit. Never perform installation and s

Inhaltszusammenfassung zur Seite Nr. 5

A INPUT UNIT ID indicator C POWER ON/OFF This indicator displays the ID number of the INPUT Use this switch to turn the power to the AI8 on and connector of the DSP unit DSP1D/DSP1D-EX con- off. When the power is turned on, the INPUT UNIT nected to the AI8. If an error occurs in the connection ID indicator lights up. to the DSP1D, or if the unit does not lock to the word- D CONTROL PORT switch clock signal, one of the following error indica

Inhaltszusammenfassung zur Seite Nr. 6

■ Specifications Sampling frequency (external sync) 39.69 kHz – 50.88 kHz USA and Canada : 120 V, 60 Hz Power supply Others : 230 V, 50 Hz Power consumption 120 W Dimensions (W × H × D) 480 mm × 141.5 mm × 466.8 mm Weight 15.4 kg Operating temperature 10 – 35˚C Power cable length 2.1 m Cooling fan speed always fixed Accessories Connection cable (68-pin, D-sub, half-pitch) x 1, Length: 3m Digital I/Os I/O connectors Level Type OUTPUT A, B, C RS-422 D-sub, half-pitch, 68-p

Inhaltszusammenfassung zur Seite Nr. 7

■ Dimensions 430 480 12 3 4 5 6 7 8 UNIT NO. PHANTOM MASTER ON +48V OFF POWER ON/ OFF ANALOG INPUT BOX unit: mm •Specifications and appearance are subject to change without notice for improvement. •For European Model Purchaser/User information specified in EN55103-1 and EN55103-2. Inrush Current: 22A Conformed Environment: E1, E2, E3 and E4. 7 455 132(3U) 466.8 9.5 141.5

Inhaltszusammenfassung zur Seite Nr. 8

For details of products, please contact your nearest Yamaha Die Einzelheiten zu Produkten sind bei Ihrer unten aufgeführten representative or the authorized distributor listed below. Niederlassung und bei Yamaha Vertragshändlern in den jeweiligen Bestimmungsländern erhältlich. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous