Bedienungsanleitung DigiPower TC-500

Inhaltszusammenfassung zur Seite Nr. 1

Operating Instructions for Travel Charger Item # TC-500
PLEASE READ THE INFORMATION AND FOLLOW ALL INSTRUCTIONS BEFORE USING THIS PRODUCT.
IMPORTANT WARNING:
This CHARGER is for charging rechargeable Li-Ion digital camera and camcorder batteries ONLY!
Attempting to charge any other batteries may damage the device, destroy the batteries and/or cause injury to the
user. Charging other batteries will void the warranty.
CAUTIONS:
Always unplug the charger when not in use.
Do not store, place or us

Inhaltszusammenfassung zur Seite Nr. 2

The TC500 charger is designed to work with changeable battery plates to fit and charge various Li-Ion digital camera and camcorder batteries. Each TC-500 is packaged with battery plates, to fit the different battery models from the same camera manufacturer. CHOSING THE CORRECT BATTERY PLATE 1. Find the Plate labeled with the battery model for you camera. (Battery plates are inscribed with the OEM battery # as well as the DigiPower battery #) (The battery model can be found on the battery label,

Inhaltszusammenfassung zur Seite Nr. 3

Operating instructions: 1. While the battery is on the charger, connect the base charger to a power source. A steady red light will appear to show power. The Red L.E.D. will begin to blink to indicate charging. The L.E.D. will change to GREEN when charging is complete. (Typical charge time is 1-hour for batteries up to 900mAh.) IF THE BATTETRY IS NOT MAKING CONTACT THE L.E.D. WILL REMAIN GREEN NOTE: The charger or battery may become warm when charging. This is normal. Maintenance: Use a clean,