Inhaltszusammenfassung zur Seite Nr. 1
User’s Manual
IE-703040-MC-EM1
In-circuit Emulator Option Board
Target device
V850/SV1™
Document No. U14337EJ1V0UM00 (1st edition)
Date Published August 1999 N CP(K)
1999
© 1991
Printed in Japan
Inhaltszusammenfassung zur Seite Nr. 2
[MEMO] User’s Manual U14337EJ1V0UM00 2
Inhaltszusammenfassung zur Seite Nr. 3
V850 Family and V850/SV1 are trademarks of NEC Corporation. Windows is either a trademark or a registered trademark of Microsoft Corporation in the United States and/or other countries. PC/AT is a trademark of International Business Machines Corporation. Ethernet is a trademark of Xerox Corporation. UNIX is a registered trademark in the United States and other countries, licensed exclusively through X/Open Company Limited. • The information in this document is subject to change without notice.
Inhaltszusammenfassung zur Seite Nr. 4
Regional Information Some information contained in this document may vary from country to country. Before using any NEC product in your application, pIease contact the NEC office in your country to obtain a list of authorized representatives and distributors. They will verify: • Device availability • Ordering information • Product release schedule • Availability of related technical literature • Development environment specifications (for example, specifications for third-party tools
Inhaltszusammenfassung zur Seite Nr. 5
INTRODUCTION Target Readers This manual is intended for users who design and develop application systems using the V850/SV1™. The purpose of this manual is to describe the proper operation of the IE-703040-MC- Purpose EM1 and its basic specifications. Organization This manual is divided into the following parts. • Overview • Names and functions of components • Cautions How to Read This Manual It is assumed that the reader of this manual has general knowledge in the fields of electrical engineeri
Inhaltszusammenfassung zur Seite Nr. 6
Related Documents When using this manual, refer to the following manuals. The related documents indicated in this publication may include preliminary versions. However, preliminary versions are not marked as such. { Documents related to development tools (user’s manuals) Document Name Document Number IE-703002-MC U11595E IE-703040-MC-EM1 This manual CA830, CA850 (C Compiler package) Operation Windows-based U13998E C language U13997E Project manager U13996E CA850 (C Compiler package) Assembly Lan
Inhaltszusammenfassung zur Seite Nr. 7
CONTENTS CHAPTER 1 OVERVIEW .........................................................................................................................11 1.1 Hardware Configuration............................................................................................................................... 11 1.2 Features (When Connected to IE-703002-MC) ........................................................................................... 12 1.3 Function Specifications (When Connected to
Inhaltszusammenfassung zur Seite Nr. 8
LIST OF FIGURES Figure No. Title Page 1-1 System Configuration ............................................................................................................................................13 1-2 Contents in Carton.................................................................................................................................................14 1-3 Accessories .........................................................................................................
Inhaltszusammenfassung zur Seite Nr. 9
LIST OF TABLES Table No. Title Page 2-1 Main System Clock Setting ................................................................................................................................... 21 2-2 Subsystem Clock Setting ...................................................................................................................................... 22 2-3 JP1 Setting in IE-703002-MC...................................................................................................
Inhaltszusammenfassung zur Seite Nr. 10
[MEMO] 10 User’s Manual U14337EJ1V0UM00
Inhaltszusammenfassung zur Seite Nr. 11
CHAPTER 1 OVERVIEW The IE-703040-MC-EM1 is an option board for the IE-703002-MC in-circuit emulator. By connecting the IE- 703040-MC-EM1 and IE-703002-MC, hardware and software can be debugged efficiently in system development using the V850/SV1. In this manual, the basic setup procedure and switch settings of the IE-703002-MC when using the IE-703040-MC- EM1 are described. For the names and functions of the parts of the IE-703002-MC, and for the connection of elements, refer to the IE-703
Inhaltszusammenfassung zur Seite Nr. 12
CHAPTER 1 OVERVIEW 1.2 Features (When Connected to IE-703002-MC) { Maximum operating frequency: 20 MHz (at 3.3 to 5.0-V operation) { Extremely lightweight and compact { Higher equivalence with target device can be achieved by omitting buffer between signal cables. { The following pins can be masked. RESET, NMI, WAIT, HLDRQ { Two methods of connection to target system: • Pod tip direct connection (For information on the pod, refer to the IE-703002-MC User’s Manual (U11595E)) • Attach an extens
Inhaltszusammenfassung zur Seite Nr. 13
CHAPTER 1 OVERVIEW 1.4 System Configuration The system configuration when connecting the IE-703002-MC to the IE-703040-MC-EM1 and a personal computer TM (PC-9800 series or PC/AT (or compatibles)) is shown below. Figure 1-1. System Configuration <13> <5> <6> <7> [Magnified drawing: example of use of connector for target connection] <12> <14> <8> <2> <4> <10> Target system <11> For PC-9800 series <9> <3> <10> <11> For PC/AT or compatibles <1> Target system Remark <1> Personal computer (PC-98
Inhaltszusammenfassung zur Seite Nr. 14
CHAPTER 1 OVERVIEW 1.5 Contents in Carton The carton of the IE-703040-MC-EM1 contains a main unit, guarantee card, packing list, and accessory bag. Make sure that the accessory bag contains this manual and the connector accessories. If there are missing or damaged items, please contact an NEC sales representative or an NEC distributor. Figure 1-2. Contents in Carton <1> IE-703040-MC-EM1 <4> Packing list <3> Guarantee card <2> Accessory bag <1> IE-703040-MC-EM1 × 1 <2> Accessory bag × 1 <3>
Inhaltszusammenfassung zur Seite Nr. 15
CHAPTER 1 OVERVIEW Check that the accessory bag contains this manual, an accessory list (× 1), and the following accessories. (a) Connector for target connection (NQPACK176SD) × 1 (including NQGUIDE × 3, driver × 1) (b) Connector for emulator connection (YQPACK176SD) × 1 (including YQGUIDE × 4) (c) Crystal oscillator (20-MHz, 8-pin type) (d) Plastic screws × 4 (including nuts and washer × 4) (e) Jumper contact × 1 Figure 1-3. Accessories (a) Connector for target connection (b) Connector fo
Inhaltszusammenfassung zur Seite Nr. 16
CHAPTER 1 OVERVIEW 1.6 Connection between IE-703002-MC and IE-703040-MC-EM1 The procedure for connecting the IE-703002-MC and IE-703040-MC-EM1 is described below. Caution Connect carefully so as not to break or bend connector pins. <1> Remove the pod cover (upper and lower) of the IE-703002-MC. <2> Replace the crystal oscillator mounted in the pod of the IE-703002-MC with the crystal oscillator supplied (20 MHz) or an arbitrary oscillator (user’s frequency). <3> Set the PGA socket lever o
Inhaltszusammenfassung zur Seite Nr. 17
CHAPTER 1 OVERVIEW Figure 1-4. Connection between IE-703002-MC and IE-703040-MC-EM1 (1/2) (a) Overview Nut Upper cover Washer IE-703040-MC-EM1 Nylon rivets IE-703002-MC Lower cover Plastic screw (b) PGA Socket Lever of IE-703040-MC-EM1 CLOSE OPEN 17 User’s Manual U14337EJ1V0UM00
Inhaltszusammenfassung zur Seite Nr. 18
CHAPTER 1 OVERVIEW Figure 1-4. Connection between IE-703002-MC and IE-703040-MC-EM1 (2/2) (c) Connecting part (IE-703040-MC-EM1) Pin A1 position : Insertion guide : IE-703002-MC insertion area 18 User’s Manual U14337EJ1V0UM00
Inhaltszusammenfassung zur Seite Nr. 19
1 JP2 3 1 JP1 7 1 7 JP3 JP4 1 3 JP5 1 3 JP6 2 10 9 1 CHAPTER 2 NAMES AND FUNCTIONS OF COMPONENTS This chapter describes the names, functions, and switch settings of components in the IE-703040-MC-EM1. For the details of the pod, jumper, and switch positions, etc., refer to the IE-703002-MC User’s Manual (U11595E). 2.1 Component Names and Functions of IE-703040-MC-EM1 Figure 2-1. IE-703040-MC-EM1 (a) Top view (b) Bottom view Direction of pin 1 of connector for target connection Direction o
Inhaltszusammenfassung zur Seite Nr. 20
CHAPTER 2 NAMES AND FUNCTIONS OF COMPONENTS (1) TEST pins (TP5, TP11, TP12) These are pins used for testing the analog signals of the standalone emulator. • TP 5: GND • TP 11: GND • TP 12: GND (2) JP1 This is a pin board for product check. Mount nothing on JP1. (3) JP2, JP4 These are pin boards for product check. Use and retain the factory settings (pins 2 and 3 shorted) (For details, refer to 2.2 Clock Settings) (4) JP3 This is a pin board for supplying the subsystem clock. (For d
