Inhaltszusammenfassung zur Seite Nr. 1
Model # ARW027
User’s Manual
Inhaltszusammenfassung zur Seite Nr. 2
Regulatory Notes and Statements Health and Authorization for Use Radio frequency electromagnetic energy is emitted from the Wireless LAN device. The energy levels of these emissions are much less than the electromagnetic energy emissions from wireless devices such as cell phones. Wireless LAN devices are safe for use and meet the frequency safety standards and recommendations. The use of Wireless LAN devices may be restricted in some situations or environments such as: • On board of ai
Inhaltszusammenfassung zur Seite Nr. 3
USA-FCC (Federal Communications Commission) Statement This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of this device. FCC Radio Frequency Exposure Statement This Wireless LAN radio device has been evaluated under FCC Bulletin OET 65 and found compliant to the requirements as set fort
Inhaltszusammenfassung zur Seite Nr. 4
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the distance between the equipment and the receiver. 3. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. Export restrict
Inhaltszusammenfassung zur Seite Nr. 5
Protection requirements for health and safety – Article 3.1a Testing for electric safety according to EN 60950 has been conducted. These are considered relevant and sufficient. Protection requirements for electromagnetic compatibility – Article 3.1b Testing for electromagnetic compatibility according to EN 301 489-1, EN 301 489-17 and EN 55024 has been conducted. These are considered relevant and sufficient. Effective use of the radio spectrum – Article 3.2 Testing for radio test su
Inhaltszusammenfassung zur Seite Nr. 6
TABLE OF CONTENTS About This Guide .............................................................................2 Purpose.........................................................................................2 Overview of this User’s Manual....................................................2 Introduction......................................................................................3 Applications .................................................................................4 Fe
Inhaltszusammenfassung zur Seite Nr. 7
Login to the Wireless Broadband Router through LAN................15 Using the Web Browser ..............................................................15 Quick Setup................................................................................16 Advanced Setup..........................................................................22 Technical Specifications .................................................................38 Appendix A...................................................
Inhaltszusammenfassung zur Seite Nr. 8
ABOUT THIS GUIDE Congratulations on your purchase of this IEEE 802.11b Wireless Broadband Router. This integrated access device combines Internet gateway functions with wireless LAN and Fast Ethernet switch. It provides a complete solution for Internet surfing and office resource sharing, and it is easy to configure and operate for everyone. Purpose This manual discusses how to install the IEEE 802.11b Wireless Broadband Router. Overview of this User’s Manual Introduction: Describes
Inhaltszusammenfassung zur Seite Nr. 9
INTRODUCTION With the explosive growth of the Internet, accessing information and services at any time, day or night, has become a standard requirement for most people. The era of the standalone PC is waning. Networking technology is moving out of the exclusive domain of corporations and into homes with at least two computers. This integrated access device combines Internet gateway functions with wireless LAN and Fast Ethernet switch. Designed for the business and home, it saves you the
Inhaltszusammenfassung zur Seite Nr. 10
Applications Broadband Internet access: Several computers can share one high-speed broadband connection through wireless or wired connections (WLAN, LAN and WAN-Internet). Resource sharing: Share resources such as printers, scanners and other peripherals. File sharing: Exchange data, messages, and distribute files. Online gaming: Online gaming and e-commerce services can be easily setup through the local area network. Firewall: A built-in firewall function provides security and
Inhaltszusammenfassung zur Seite Nr. 11
UNPACKING AND SETUP This chapter provides unpacking and setup information for the Wireless Broadband Router. Unpacking Open the box and carefully unpack it. The box should contain the following items: u One Wireless Broadband Router u One External Power Adapter u One Quick Installation Guide u One User’s Manual If any item is found missing or damaged, please contact your local reseller for replacement. Setup The setup of the Wireless Broadband Router can be performed properly using
Inhaltszusammenfassung zur Seite Nr. 12
HARDWARE INSTALLATION Front Panel The figure below shows the front panel of the Wireless Broadband Router. Wireless Broadband Router Front Panel POWER This indicator lights green when the hub receives power, otherwise it is off. SYSTEM This indicator blinks green when the router is working properly, otherwise it is off. Link/ACT (WAN / LAN) These indicators light green when the LAN/WAN ports are connected to an xDSL/Cable modem successfully. These indicators blink green while the
Inhaltszusammenfassung zur Seite Nr. 13
Rear Panel The figure below shows the rear panel of the Wireless Broadband Router. Wireless Broadband Router Rear Panel Antennas There are two 2dBi Gain Antennas in the rear panel for wireless connection. DC IN Plug the power adapter to this power jack. WAN Port Connect the xDSL/Cable modem to the WAN Port. LAN (1-4) Four RJ-45 10/100Mbps Auto-MDIX ports are available for either 10Mbps or 100Mbps Ethernet connections. RESET Use a pin-shaped item to push the reset button. It will
Inhaltszusammenfassung zur Seite Nr. 14
LAN port WAN port Hardware connections Note: Prior to connecting the hardware, make sure to power off your computer, DSL/Cable modem, and the Wireless Broadband Router. Connect the Router using LAN PC PC xDSL Modem PC PC WirelessBroadband Router 1. Connect one end of the network cable to the WAN port of the Wireless Router and connect the other end of the cable to a DSL or Cable modem. 2. With another network cable, connect one end of the cable to the computer’s Ethernet card and con
Inhaltszusammenfassung zur Seite Nr. 15
WAN port Connect the Router using Wireless LAN Notebook xDSL Modem PC Notebook Wireless LAN Networking WirelessBroadband Router 1. Connect one end of the network cable to the WAN port of the Wireless Router and connect the other end of the cable to a DSL or Cable modem. Powering On 1. Power on the DSL/Cable modem first. Then power on the wireless broadband router by connecting the power adapter to the power jack of the router. Finally, power on your computer. Check the Installatio
Inhaltszusammenfassung zur Seite Nr. 16
PC NETWORK TCP/IP SETTING The network TCP/IP settings differ based on the computer’s operating system (Win95/98/ME/NT/2000/XP) and are as follows. Windows 95/98/ME 1. Right-click the Network neighborhood icon on the desktop. 2. Select TCP/IP and click Properties. 3. Select Obtain an IP address automatically in the IP address tab. 10
Inhaltszusammenfassung zur Seite Nr. 17
4. Select Disable DNS in the DNS tab. 5. Select None for the Gateway tab and click OK. 11
Inhaltszusammenfassung zur Seite Nr. 18
Windows 2000 1. Right-click My Network Places on the desktop. 2. Right-click Local Area Connection and select Properties. 3. Select Internet Protocol (TCP/IP) and click Properties. 4. Select Obtain an IP address automatically and Obtain DNS server address automatically, and click OK. 12
Inhaltszusammenfassung zur Seite Nr. 19
Windows NT4.0 1. Go to Start and then Control Panel. 2. Select Network to enter the TCP/IP setting window. 3. Select TCP/IP Protocol and click Properties. 4. Select Obtain an IP address automatically in the IP Address tab. 5. Select Disable DNS in the DNS tab and click OK. 13
Inhaltszusammenfassung zur Seite Nr. 20
Windows XP 1. Right-click My Network Places on the desktop. 2. Right-click Local Area Connection and select Properties. 3. Select Internet Protocol (TCP/IP) and click Properties. 4. Select Obtain an IP address automatically and Obtain DNS server address automatically, and click OK. 14
