Inhaltszusammenfassung zur Seite Nr. 1
CG-WLBARGMO
MISO Wireless broadband Router
User Manual
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
Contents WLBARGMO Manual 1. Product Introduction...................................................................................................3 1.1 Package Contents............................................................................................3 1.2 Features...............................................................................................................3 1.3 Hardware Introduction...............................................................................4 2. Pr
Inhaltszusammenfassung zur Seite Nr. 4
WLB C AR on GMO M ten anual ts ......................................................................................................30 ..............................................................30 .........................................................33 .............................................................34 ........................................................................
Inhaltszusammenfassung zur Seite Nr. 5
Product Introduction WLBARGMO Manual 1 Corega WLBARGMO is a MISO wireless broadband Router with IEEE802.11g wireless access point standard. Its MIMO XR technique can improve transmit speed and coverage area. The maximum transmit length is up to 450m and the coverage area can be six times more than general 802.11g products. It also has 3 antennas which can improve transmit quality. Moreover, WL- BARGMO supports security settings, such as WEP, WPA/WPA2-PSK, and 802.1x. WDS and WMM functions
Inhaltszusammenfassung zur Seite Nr. 6
WLBARGMO Manual 1.3 Hardware Introduction 9 1 2 3 4 5 8 10 6 7 1 1 7. Link LED (Green) 1. Initial Button ON:Connected Press this button it will reset to Blink:Transmitting or default setting receiving data 2. WLAN LED (Green) ON:Connected 8. Detachable Antenna Connector 3. Power LED (Green) Indicate power status 9. WAN port Connected with modem 4.Status LED (Red) Blink:Working normal 10. LAN ports(1-4) ON:Firmware upgrade Connecte
Inhaltszusammenfassung zur Seite Nr. 7
Product Installation WLBARGMO Manual 2 2.1 Hardware Installation Following the steps below to set up WLBARGMO and the connection. (1) Insert the cable connector into the Network Adapter embeded in PC, and insert the other side into one of LAN ports (1~4) of the Router. (2) Insert the connect into the WAN port of the Router and insert the other side into the modem. (3) Connect the Power Adapter, and plug in the AC power. W AN L A N 2.2 Installation Procedure To ensure successful installation,
Inhaltszusammenfassung zur Seite Nr. 8
WLBARGMO M PC S anual etting 3 3.1 TCP/IP Configuration The following steps and screenshots maybe dissimilar in different operat- ing systems. This manual takes Windows XP/2000, 95/98/ME, and Mac O/S as examples: 3.1.1 Windows XP O/S (1) Enter [Control Panel] -> click [Network Connection] -> right click and select [Open]. (2) Click [Local Area Connection] and right click and select [Properties]. 6 6 6 7 7 7
Inhaltszusammenfassung zur Seite Nr. 9
WLBARGMO Manual (3) Click [General] -> click [Internet Protocol (TCP/IP), and click [Properties]. (4) Click [General], select [Obtain an IP Address Automatically], and [Obtain DNS Server address automatically], and press [Advance]. 6 6 6 7 7 7
Inhaltszusammenfassung zur Seite Nr. 10
WLBARGMO Manual (5) Click [DNS] tab, unselect [Register this connection’s address in DNS], and press [OK]. (6) Go back to [Internet Protocol TCP/IP] and press [OK]. (7) Press [OK] to close [Local Area Connection Properties]. 3.1.2 Windows 2000 O/S (1) Go to [My Computer], and enter [Control Panel], click open [Network and Dial Up Connections]. 8 8 9 9
Inhaltszusammenfassung zur Seite Nr. 11
WLBARGMO Manual (2) Right click [Local Area Connection], and select [Properties] *Note: Please check if TCP/IP had been installed in the [Local Area Connection]. (3) Click [Internet protocol (TCP/IP)] and click [Properties]. 8 8 9 9
Inhaltszusammenfassung zur Seite Nr. 12
WLBARGMO Manual (4) Select [Obtain an IP address automatically], and [Obtain DNS server address automatically]. And click [Advance]. (5) Click [DNS] tab in [Advance TCP/IP setting] page, and unselect [Register this connection’s DNS address, and press [OK]. 10 10 11 11
Inhaltszusammenfassung zur Seite Nr. 13
WLBARGMO Manual 3.1.3 Windows 98/95/ME O/S The configurations in all Windows 98/95/ME are the same, and this manual takes Windows 98 as an example. (1) Enter [Control Panel], and double click [Network]. (2) Click [Configuration] tab, and select [TCP/IP], click [Properties]. (3) Select [IP Address], and select [Obtain IP address automatically. Press [OK]. 10 10 11 11
Inhaltszusammenfassung zur Seite Nr. 14
WLBARGMO Manual (4) Click [Gateway] tab, remove all the gateways, and press [OK] to close the window. (5) Go to [Network] and press [OK] to close the page. (6) The [Restart the windows] screen will pop-up, press [OK] to restart the PC. If the PC is not shown this message, restart the PC manually. 3.1.4 Mac OS 8.x~9.x O/S (1) Open the [TCP/IP] configuration from [Control Panel]. (2) Select [Ethernet Network] in the [connection methods]; select [DHCP server] in [Configuration], and close this pag
Inhaltszusammenfassung zur Seite Nr. 15
WLBARGMO Manual 3.2 Browser Configuration 3.2.1 Windows O/S The following examples are for Windows XP O/S, skip this chapter if you are using Windows 2000/98/ME. (1) Open Internet Explorer (IE 6.0), select [Tools] menu and click [Internet Options]. If a [Dial-up Connection] window is pop-up, close it, and do not connect to the Internet now. (2) Click [Connections] tab -> select [Never dial a connection] -> click [LAN Settings]. 12 12 13 13
Inhaltszusammenfassung zur Seite Nr. 16
WLBARGMO Manual (3) Unselect all three options in the [Local Area Network LAN Setting]. (4) Press [OK] in the [Internet Options]. 3.2.2 Mac O/S (1) Open Internet Explorer (IE 5.0) Go to [Edit] in the menu bar, select [Internet Explorer Preferences]. (2) Select [Proxies] options in [Network] on the left-side configuration items. (3) Do not select [Web Proxy], press [OK]. 14 14 14 15 15 15
Inhaltszusammenfassung zur Seite Nr. 17
Network Configuration WLBARGMO Manual 4 4.1 Quick Network Configuration Basic configuration is required before connection your computer to the inter- net via WLBARGMO. The connection methods may be differed by your contract to the ISP. Please reconfirm your connection conditions with your ISP prior to configure this router. The configuration procedures are as follow: *Note: Anti-virus or Firewall software may prevent this router from being set-up properly. Please close such software through ou
Inhaltszusammenfassung zur Seite Nr. 18
WLBARGMO Manual (5) Click [Quick Installation Setting]. (6) When seeing this screen shot, click on [Next]. (7) Select your connection type. Please make sure that your ADSL connection type is correct as you enter; the correct information can be obtained from the documents given by your ISP. If not, consult with your ISP before setting. 16 16 17 17
Inhaltszusammenfassung zur Seite Nr. 19
WLBARGMO Manual 4.1.1 Auto obtain IP (DHCP) (1) If you are subscribing to auto obtain IP service ( or DHCP Dynamic IP) from your ISP, such as Cable Modem that obtain an IP automatically for connection, please select [Auto obtain IP(DHCP)]. Click on [Next]. (2) Press [MAC address clone] to obtain the Ethernet card’s MAC address. Then press [Next]. 16 16 17 17
Inhaltszusammenfassung zur Seite Nr. 20
WLBARGMO Manual (3) Click on [Save] to perform connection tests. (4) Within seconds, the result of the connection test will be appeared in the dialogue box to indicate the connection status. When [Connection ok] appears, click on [Close]. (5) Open the web browser (IE 6.0), and test with any website for testing the connection. * Note: if the connection to the website fails. Restart your Cable Modem, and check the installation of CG-WLBARGMO properly, such
