Inhaltszusammenfassung zur Seite Nr. 1
Quick Start Guide
CISCO 760 SERIES CABLING AND SETUP
ISDN provider/
telephone company
ISDN telephone jack
Phone #1
Internet
Phone #2
Power supply
Internet service provider/
corporate headquarters
Your computer
Cisco 700 series router
Your computer
Your computer
1
2
Unpack the Router
2
Connect Cables to the Router
3
Set Up the Router
Inhaltszusammenfassung zur Seite Nr. 2
PH2 PH1 TXD RXD CH2 CH1 RXD TXD TXD RXD LAN LINE 1 Unpack the Router Remove the router from the package and locate the clear plastic bag labeled “Open Me First.” The bag contains all the required cables for your router. Also remove the black power supply located in the accessory kit. 1 Cisco 760 series router 1 yellow Ethernet cable 1 red ISDN U cable Cisco 762, Cisco 766 routers only. 1 orange ISDN S/T cable Cisco 761, Cisco 765 routers only. 1 RJ-45-to-RJ-11 adapter 2 1 blue config cable (optio
Inhaltszusammenfassung zur Seite Nr. 3
10BASET ISDN S/T CONFIG S NT-1 0 NODE HUB CISCO 776 ISDN U +5V ---1.5A +/-5% -30V--- 0.2A +/-25% 2 Connect Cables to the Router (Cisco 766 shown) ETHERNET CONFIG NODE ISDN S/T HUB ISDN U PHONE 1 PHONE 2 Power switch Power connector The ports on the router and the cables are color coded to assist you in making the proper 3 connections. Position the router so that the rear panel is facing you. The following pages contain detailed instructions on connecting cables to your router.
Inhaltszusammenfassung zur Seite Nr. 4
10BASET ISDN S/T CONFIG S 0 10BASET ISDN S/T CONFIG S NT-1 0 NODE HUB NODE HUB CISCO 776 CISCO 776 ISDN U +5V ---1.5A +/-5% -30V--- 0.2A +/-25% +5V ---1.5A +/-5% -30V--- 0.2A +/-25% 2 Connect the Ethernet Cable to a Computer or Hub Option 1: To connect the Ethernet cable to a computer, go to option 1 below. Option 2: To connect the Ethernet cable to a hub, go to option 2 below. Option 1 Connect the Ethernet Cable to a Computer Connect the yellow Ethernet cable to the 1 yellow port labeled ETHERN
Inhaltszusammenfassung zur Seite Nr. 5
10BASET ISDN S/T CONFIG S 0 NT-1 10BASET ISDN S/T CONFIG S0 10BASET ISDN S/T CONFIG S NT-1 0 NODE HUB NODE HUB NODE HUB CISCO 776 ISDN U CISCO 776 CISCO 776 ISDN U +5V ---1.5A +/-5% -30V--- 0.2A +/-25% +5V ---1.5A +/-5% -30V--- 0.2A +/-25% +5V ---1.5A +/-5% -30V--- 0.2A +/-25% 2 Connect the ISDN Line Check the rear panel of your router to find out which model you have. Option 1: If you have a Cisco 762 or 766, go to option 1 below. Option 2: If you have a Cisco 761 or 765, go to option 2 below. O
Inhaltszusammenfassung zur Seite Nr. 6
10BASET ISDN S/T CONFIG S 0 NT-1 NODE HUB CISCO 776 ISDN U +5V ---1.5A +/-5% -30V--- 0.2A +/-25% 2 Connect Optional Telephones and Facsimile Machines RJ-11 telephone cable Telephone If you are using a Cisco 765 or Cisco 766, you can connect telephones and facsimile machines directly to the router. 6 Connect the telephone cable (provided with your telephone or facsimile machine) to the gray port labeled PHONE 1 or PHONE 2 on the rear panel of your router. If you are connecting only one device, co
Inhaltszusammenfassung zur Seite Nr. 7
ETHERNET ISDN S/T 1 2 3 4 ??? CONFIG S BRI 0 CISCO 776 +5V ---1.5A +/-5% -30V--- 0.2A +/-25% 2 Connect Power and Turn On the Router 1 4 Power connector 2 Desktop power supply 3 7 Step 1 Connect the round end of the power supply cable to the black circular power connector on the rear panel of your router. Step 2 Connect the black power supply cord to the black power supply. Step 3 Connect the power supply cord to an electrical outlet. Step 4 Turn on the router by using the on/off switch on the re
Inhaltszusammenfassung zur Seite Nr. 8
3 Set Up the Router If you are configuring your router using Microsoft Windows 95 or Windows NT version 4 operating systems, insert the CD-ROM located in the back of this guide into the CD-ROM drive of your computer. The Fast Step setup program should start automatically. If the setup program does not start automatically, follow these instructions: Step 1 Double-click the My Computer icon. Step 2 Double-click the CD icon. Step 3 Double-click the Setup.exe icon. Follow the on-screen instructions t
Inhaltszusammenfassung zur Seite Nr. 9
Order the ISDN Line Step 1 Contact your ISDN service provider (usually the telephone company). Step 2 Order a single 128-kbps ISDN BRI line (which is equivalent to two telephone lines). If applicable, request the additional call offering option that allows telephone conversations while the router is in use. Order other features you want—for example, call conferencing, call waiting, or call transferring. Step 3 Obtain and record the following information from your ISDN service provider: 9 ISDN In
Inhaltszusammenfassung zur Seite Nr. 10
Gather Connection Information Option 1: To connect directly to an Internet service provider, go to option 1 below. Option 2: To connect directly to your remote corporate network, go to option 2 below. Option 1 Internet Service Provider Option 2 Remote Corporate Network Step 1 Contact your Internet service provider. Step 1 Contact your network administrator. Step 2 Obtain and record the following Step 2 Order Internet service for a single information from your network 128-kbps ISDN BRI line. ad
Inhaltszusammenfassung zur Seite Nr. 11
11
Inhaltszusammenfassung zur Seite Nr. 12
Corporate Headquarters European Headquarters Americas Asia Headquarters Cisco Systems, Inc. Cisco Systems Europe s.a.r.l. Headquarters Nihon Cisco Systems K.K. 170 West Tasman Drive Parc Evolic, Batiment L1/L2 Cisco Systems, Inc. Fuji Building, 9th floor San Jose, CA 95134-1706 16 Avenue du Quebec 170 West Tasman Drive 3-2-3 Marunouchi USA Villebon, BP 706 San Jose, CA 95134-1706 Chiyoda-ku, Tokyo 100 http://www.cisco.com 91961 Courtaboeuf Cedex USA Japan Tel: 408 526-4000 France http://www.cisco
