Inhaltszusammenfassung zur Seite Nr. 1
ADMINISTRATION
GUIDE
Cisco Small Business
RV0xx Series Routers
RV042 Dual WAN VPN Router
RV042G Gigabit Dual WAN VPN Router
RV082 Dual WAN VPN Router
RV016 Multi-WAN VPN Router
Inhaltszusammenfassung zur Seite Nr. 2
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R) © 2011-2012 Cisco Systems, Inc. All rights reserved. 78-19576-01 B0
Inhaltszusammenfassung zur Seite Nr. 3
Contents Chapter 1: Introduction 7 RV0xx Series Router Features 7 Ports 9 Status Lights 10 Other Hardware Features 11 Default Settings 12 Mounting Options 12 Placement Tips 12 Desktop Placement 12 Wall Mounting 13 Rack Mounting RV082 or RV016 14 Connecting the Equipment 15 Getting Started with the Configuration 16 Troubleshooting Tips 17 Features of the User Interface 18 Chapter 2: Viewing System Summary Information 20 Chapter 3: Setup 26 Setting Up the Network 27 Changing the Administrator Us
Inhaltszusammenfassung zur Seite Nr. 4
Contents Chapter 4: DHCP 63 Setting Up the DHCP Server or DHCP Relay 63 Viewing the DHCP Status Information 70 Router Advertisement (IPv6) 71 Chapter 5: System Management 73 Setting Up Dual WAN and Multi-WAN Connections 73 Managing the Bandwidth Settings 81 Setting Up SNMP 84 Enabling Device Discovery with Bonjour 85 Using Built-In Diagnostic Tools 87 Restoring the Factory Default Settings 89 Upgrading the Firmware 90 Restarting the Router 91 Backing Up and Restoring the Settings 92 Chapter 6:
Inhaltszusammenfassung zur Seite Nr. 5
Contents Updating the ProtectLink License 120 Chapter 9: VPN 122 Introduction to VPNs 122 Site to Site VPN (Gateway To Gateway) 123 Remote Access (Client To Gateway) 123 Remote Access with Cisco QuickVPN 125 Remote Access with PPTP 125 Viewing the Summary Information for VPN 126 Setting Up a Gateway to Gateway (Site to Site) VPN 130 Setting Up a Remote Access Tunnel for VPN Clients (Client To Gateway) 139 Managing VPN Users and Certificates 147 Setting Up VPN Passthrough 149 Setting Up PPTP Se
Inhaltszusammenfassung zur Seite Nr. 6
Contents Appendix D: Configuring a Gateway-to-Gateway VPN Tunnel Between RV0xx Se- ries Routers 170 Topology Options 170 VPN Hub and Spoke Topology 171 VPN Mesh Topology 172 Other Design Considerations 173 Configuring a VPN Tunnel on a Cisco RV0xx Series Router 175 Example: Sites with Static WAN IP Addresses 176 Example: Site with a Dynamic WAN IP Address 179 Appendix E: IPSec NAT Traversal 183 Overview 183 Appendix F: Bandwidth Management 186 Creation of New Services 186 Creation of New Bandw
Inhaltszusammenfassung zur Seite Nr. 7
1 Introduction Thank you for choosing a RV0xx Series VPN Router. This guide provides complete information to help you configure and manage your router. This chapter includes information to help you get started using your router. Refer to these topics: • RV0xx Series Router Features, page 7 • Mounting Options, page 12 • Connecting the Equipment, page 15 • Getting Started with the Configuration, page 16 • Features of the User Interface, page 18 RV0xx Series Router Features Cisco RV0xx Series d
Inhaltszusammenfassung zur Seite Nr. 8
Introduction RV0xx Series Router Features 1 RV042 and RV042G Ports 1 2 3 4 Internet DMZ/Internet RV042 and RV042G Status Lights System DIAG Internet DMZ/ DMZMode 1 2 3 4 Internet Cisco Small Business RV042 RV082 Ports and Status Lights 12 3 4 Cisco Small Business RV082 DMZ/Internet Internet DIAG Internet 1234 DMZ DMZ System Internet Mode 5678 10/100 16-Port VPN Router 56 7 8 RV016 Ports and Status Lights 12345678 Cisco Small Business RV016 12345678 LAN/Act DIAG 910 11 12 13 LAN/Act Internet
Inhaltszusammenfassung zur Seite Nr. 9
Introduction RV0xx Series Router Features 1 Ports Port Description Internet (RV042 Use this port to connect the router to a and RV082) or broadband network device. Internet 1-2 (RV016) DMZ/Internet Use this port to connect the router to either (RV042 and a second broadband network device or a RV082) DMZ host such as a web server or FTP server. A DMZ allows public Internet traffic to access a specified computer on your network without exposing your LAN. DMZ (RV016) Use this port to con
Inhaltszusammenfassung zur Seite Nr. 10
Introduction RV0xx Series Router Features 1 Status Lights Light Description DIAG Lit—The router is preparing for use. Unlit— The router is ready for use. System Steady—The router is powered on. Flashing—The router is running a diagnostic test. Internet (RV082, Steady—A device is connected to the RV042, RV042G) Internet port. Flashing—There is network or Internet 1-2 activity over the Internet port. (RV016) DMZ/Internet Steady—A device is connected to the (RV082, RV042, DMZ/Internet or DMZ
Inhaltszusammenfassung zur Seite Nr. 11
Introduction RV0xx Series Router Features 1 Other Hardware Features Feature Description Reset The Reset button is an indented black button. On the back panel of the RV042 and RV042G, look for this button near the port labeled 1. On the front panel of the RV082 and RV016, look for this button near the Internet and DMZ ports . • To restart the router or restore connectivity: If the router is having problems connecting to the Internet, use the tip of a pen to press and hold the Reset but
Inhaltszusammenfassung zur Seite Nr. 12
Introduction Mounting Options 1 Default Settings Parameter Default Value Username admin Password admin LAN IP 192.168.1.1 DHCP Range 192.168.1.100 to 149 Netmask 255.255.255.0 Mounting Options Placement Tips • Ambient Temperature—To prevent the router from overheating, do not operate it in an area that exceeds an ambient temperature of 104°F (40°C). • Air Flow—Be sure that there is adequate air flow around the router. • Mechanical Loading—Be sure that the router is level and stable to avoid
Inhaltszusammenfassung zur Seite Nr. 13
Introduction Mounting Options 1 Wall Mounting The router has two wall-mount slots on the bottom panel. To mount the router on a wall, you need mounting hardware (not included). Suggested hardware is illustrated below (not true to scale). Suggested Hardware for Suggested Hardware for RV042 and RV042G RV082 and RV016 5-5.5 mm 20-22 mm 6.5-7 mm 16.5-18.5 mm WARNING Insecure mounting might damage the router or cause injury. Cisco is not responsible for damages incurred by insecure wall-mounti
Inhaltszusammenfassung zur Seite Nr. 14
1 2 3 4 Cisco Small Business RV082 DIAG Internet 12 3 4 DMZ/InternetInternet System Int DM erne Z t D Mode MZ 5 6 7 8 16-Port VPN 10 Ro /1 u00 ter 5 6 7 8 12 3 4 Cisco Small Business RV082 DIAG Internet 1 23 4 DMZ/Internet Internet DMZ DMZ System Internet Mode 5 6 7 8 10/100 56 78 16-Port VPN Router Introduction Mounting Options 1 STEP 2 Insert a screw into each hole, leaving a gap between the surface and the base of the screw head of 1 to 1.2 mm. STEP 3 Place the router wall-mount slots over
Inhaltszusammenfassung zur Seite Nr. 15
Introduction Connecting the Equipment 1 Connecting the Equipment STEP 1 Make sure that all network devices are powered off, including the router, PCs, Ethernet switches, and broadband network device (DSL or cable modem). STEP 2 To connect to your Internet service: • RV042, RV042G, and RV082: Connect an Ethernet cable from the broadband network device to the Internet port of the router. RV042 and RV042G Internet Port 1 2 3 4 Internet DMZ/Internet RV082 Internet Port 12 3 4 Cisco Small Busines
Inhaltszusammenfassung zur Seite Nr. 16
Introduction Getting Started with the Configuration 1 • RV016: Connect an Ethernet cable from the Internet 2 port to a second broadband network device. STEP 4 To connect a computer or server that will be a DMZ host: • RV042, RV042G, and RV082: Connect an Ethernet cable from the DMZ/ Internet port to the DMZ host. • RV016: Connect an Ethernet cable from the DMZ port to the DMZ host. STEP 5 To connect other network devices, such as computers, print servers, or Ethernet switches, connect an Et
Inhaltszusammenfassung zur Seite Nr. 17
Introduction Getting Started with the Configuration 1 STEP 6 To use the setup wizard to configure your Internet connection, click Setup Wizard on the System Summary page, or click Wizard in the navigation tree. In the Basic Setup section, click Launch Now. Follow the on-screen instructions. If your web browser displays a warning message about the pop-up window, allow the blocked content. STEP 7 To configure other settings, use the links in the navigation tree. Cisco strongly recommends set
Inhaltszusammenfassung zur Seite Nr. 18
Introduction Features of the User Interface 1 Features of the User Interface The user interface is designed to make it easy for you to set up and manage your router. Refer to these topics: • Navigation, page 18 • Pop-Up Windows, page 19 • Setup Wizards, page 19 • Saving the Settings, page 19 • Help, page 19 • Logout, page 19 Navigation The major modules of the configuration utility are represented by buttons in the left navigation pane. Click a button to view more options. Click an option to
Inhaltszusammenfassung zur Seite Nr. 19
Introduction Features of the User Interface 1 Pop-Up Windows Some links and buttons launch pop-up windows that display more information or related configuration pages. If your web browser displays a warning message about the pop-up window, allow the blocked content. Setup Wizards Two setup wizards make it easy to set up your Internet connection and/or DMZ and to configure access rules for the WAN, LAN, and DMZ. You can use these wizards or use the other pages of the configuration utility.
Inhaltszusammenfassung zur Seite Nr. 20
2 Viewing System Summary Information The System Summary page appears after you log in to the configuration utility. You also can view this page by clicking System Summary in the navigation tree. Use this page to view information about the current status of the router and the settings. Refer to these topics: • System Information, page 21 • Cisco ProtectLink Web, page 21 • Configuration, page 22 • Port Statistics, page 22 • WAN Status, page 24 • Firewall Setting Status, page 25 • VPN Setting
