Inhaltszusammenfassung zur Seite Nr. 1
ADSL 2/2+ Router with USB
Port
ADE-3410v2
User's Manual
Inhaltszusammenfassung zur Seite Nr. 2
Copyright Copyright © 2007 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of PLANET. PLANET makes no representations or warranties, either expressed or implied, with respect to the contents he
Inhaltszusammenfassung zur Seite Nr. 3
R&TTE Compliance Statement This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 9 March 1999 on radio equipment and telecommunication terminal Equipment and the mutual recognition of their conformity (R&TTE) The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications Terminal Equipment and Satellite Earth Station Equipment) As of April 8, 2000. WEEE To avoid the potential effects on the env
Inhaltszusammenfassung zur Seite Nr. 4
Table of Contents 1. Introduction................................................................................................. 6 1.1 Features.......................................................................................... 6 1.2 Package Contents .......................................................................... 7 1.3 Physical Details ............................................................................. 7 2. Installation.....................................
Inhaltszusammenfassung zur Seite Nr. 5
3.5.2 LAN.................................................................................... 36 3.5.3 NAT.................................................................................... 37 3.5.4 Security............................................................................... 41 3.5.5 Routing ............................................................................... 43 3.5.6 DNS ..............................................................................
Inhaltszusammenfassung zur Seite Nr. 6
1. Introduction The PLANET ADSL 2/2+ Router, ADE-3410v2, provides office and residential users the ideal solution for sharing a high-speed ADSL 2/2+ broadband Internet connection on one Ethernet port and one USB port. It can support downstream transmission rates of up to 24Mbps and upstream transmission rates of up to 3.5Mbps. The product supports PPPoA (RFC 2364 - PPP over ATM Adaptation Layer 5), RFC 2684 encapsulation over ATM (bridged or routed), PPP over Ethernet (RFC 2516), and IP
Inhaltszusammenfassung zur Seite Nr. 7
VPN Pass through Support PCs with VPN (Virtual Private Networking) software using PPTP, L2TP, and IPSec are transparently supported - no configuration is required. RIP Routing It supports RIP routing protocol for routing capability. Simple Network Management Protocol (SNMP) It is an easy way to remotely manage the router via SNMP. LAN Features Dual-Port The ADE-3410v2 incorporates on one Ethernet port and one USB port, making it easy to create or extend your LAN. DHCP Server S
Inhaltszusammenfassung zur Seite Nr. 8
LED Indicator LED Meaning Lit when power is ON. 1 PWR 2 Link Lit when DSL line is connected. Blink when DSL line is training. 3 Data Blink when DSL data is transferring. Lit when connected to an Ethernet device. Blink when data is 4 LAN Transmitted / Received. Lit when the USB port is connected to the PC and working 5 USB properly. Rear Panel of ADE-3410v2 8
Inhaltszusammenfassung zur Seite Nr. 9
Rear panel Port and Button Definition Port Meaning Power 1 Power ON/OFF switch Switch 2 Power Connect the supplied power adapter to this jack (10 DC, 1A). After the device is powered on, press it to reset the device or restore to factory default settings. Reset the device 6 seconds above to 3 Reset restore the factory default settings (this is used when you can not login to the router, e.g. forgot the password) Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of th
Inhaltszusammenfassung zur Seite Nr. 10
3. 64 MB RAM minimum 4. 20 MB of free disk space minimum 5. Ethernet Network Interface Card 2.2 Hardware Installation This section describes how to connect and configure the ADE-3410v2. The DSL router may connect to a PC’s USB or Ethernet. DSL router will support at least one of connectivity methods. The preferred connectivity method is to use the Ethernet; if your PC does not support an Ethernet port, you will need to use the USB port and install additional software. Note: C
Inhaltszusammenfassung zur Seite Nr. 11
USB Installation To connect the DSL router to the PC’s USB port, perform the following: Connect the USB cable to the USB port on the DSL router. The cable has two different connectors; you may have to try both connectors. Connect the other end of the USB cable into the PC’s USB port. 2.3 Router Parameters Setting Configuring computer network card IP address Configure your network card’s TCP/IP properties to Obtain an IP address automatically from router, or set the computer’s IP
Inhaltszusammenfassung zur Seite Nr. 12
2.4 Factory Reset Button The Router may be reset to the original factory default settings by depressing the reset button for a few seconds while the device is powered on. Use a ballpoint or paperclip to gently push down the reset button. Remember that this will wipe out any settings stored in flash memory including user account information and LAN IP settings. The device settings will be restored to the factory default IP address 192.168.1.1 and the subnet mask is 255.255.255.0, the
Inhaltszusammenfassung zur Seite Nr. 13
the windows will search CD-Rom for the best USB driver. . The dialog prompted you to choose your search and installation options. You can choose the path of USB drive installation. Click The dialog prompted Please wait while the wizard searches, when the USB driver has be searched by the Windows, Click 13
Inhaltszusammenfassung zur Seite Nr. 14
Click the button to complete the USB driver installation. 3. Introduction to WEB Configuration 3.1 Quick Setup The Quick Setup allows the user to configure the ADSL router for DSL connectivity and Internet access. It also guides the user though the WAN network setup first and then the LAN interface setup. You can either manually customize the router or follow the online instruction to set up the router. The ADE-3410v2 supports the following five netwo
Inhaltszusammenfassung zur Seite Nr. 15
ADE-3410V2 also supports pass-through PPPoE sessions from the LAN side while simultaneously running a PPPoE client fro non-PPPoE LAN devices. NAPT and firewall are always enabled when PPPoE mode is selected, but they can be enabled or disabled by the user when MER or IPoA is selected, NAPT and firewall are always disabled when Bridge mode is selected. Depending on the network operating mode, and whether NAPT and firewall are enabled or disabled, the main panel will display or hide the
Inhaltszusammenfassung zur Seite Nr. 16
STEP 4: Click Next to display the following screen. Choosing different connection types pops up different settings requests. Enter appropriate settings that are requested by your service provider. The following descriptions state each connection type setup separately. For example, PPP over ATM (PPPoA) and PPP over Ethernet (PPPoE) 1. Select the PPP over ATM (PPPoA) or PPP over Ethernet (PPPoE) radio button and click Next. The following screen appears: PPP USERNAME/PPP PASSWORD T
Inhaltszusammenfassung zur Seite Nr. 17
using the LAN interface IP address. The ADSL router extends the IP subnet at the remote service provider to the LAN PC. That is, the PC becomes a host belonging to the same IP subnet. The ADSL router bridges the IP packets between WAN and LAN ports, unless the packet is addressed to the router’s LAN IP address. 2. Click Next. Enable IGMP Multicast checkbox: Tick the checkbox to enable IGMP multicast (proxy). IGMP (Internet Group Membership Protocol) is a protocol used by IP hosts t
Inhaltszusammenfassung zur Seite Nr. 18
5. After clicking Save/Reboot, the router will save the configuration to the flash memory, and reboot. The Web UI will not respond until the system is brought up again. After the system is up, the Web UI will refresh to the Device Info page automatically. The ADE-3410v2 is ready for operation and the LEDs display as described in the LED description tables. You may setup your Router manually. The first time you setup the Router it is recommended that you configure the WAN connection us
Inhaltszusammenfassung zur Seite Nr. 19
After logging in the ROUTER by a super username, you can query, configure, and modify all configurations of the ROUTER; and you can diagnose the ROUTER system too. You need to reboot the ROUTER to enable your modification or configuration effective sometimes, e.g. you modified the PVC configuration; some modification can take effective at once without the ROUTER being rebooted, such as adding a static route. See detailed descriptions below. 3.4 System Status Click “Device Info
Inhaltszusammenfassung zur Seite Nr. 20
This interface contains the following information: Board ID: Software Version: Bootloader (CFE) Version: Upstream Line Rate/Downstream Line Rate LAN IP Address: The management IP address Default Gateway: No gateway in a pure bridging mode; under other modes such as PPPOE/PPPOA, it is the address of the uplink equipment. DNS Server address: Obtained from the uplink equipment in PPPOE/PPPOA mode; No DNS Server address in a pure bridging mode; or input them man
