Inhaltszusammenfassung zur Seite Nr. 1
1/3” 520TVL High-Res. Color Camera(350HQ/550)
1/3” 380TVL High-Res. Color Camera(250)
Inhaltszusammenfassung zur Seite Nr. 2
Notice This manual is presented to users of the EQ series by EverFocus Electronics Corporation. With years of engineering research, EverFocus has spared no effort in manufacturing high quality products to users worldwide, and maintains a policy for continual product improvement. Therefore, EverFocus reserves the right to revise and improve products, their specifications and documentation without notice. All product materials: including accessories and components are provided for your c
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents Safety Warning ……...……………………………………3 Introduction……………………………………………….4 Specification……………………………………………….5 Major Parts and Their Functions………………….…….6 Installation Instructions……………………………..…. 11 ii
Inhaltszusammenfassung zur Seite Nr. 4
Safety Warning 1. Handle camera with care. Be careful when handling the camera, do not drop it or subject it to strong shock or vibration to prevent any damages to it. Do not disassemble it or place it on an unstable base. 2. Do not install camera near electric or magnetic fields. Install the camera away from any television, radio transmitter, magnet, electric motor, transformer, or audio speakers since the magnetic fields generated from the above named devices will distort the video
Inhaltszusammenfassung zur Seite Nr. 5
Introduction The new 350 HQ series is a solid-state color video camera specifically designed for high quality surveillance applications. It incorporates break through DSP technology that provides the most reliable and accurate color picture in the security industry. The camera is convenient to use with C-mount or CS-mount lenses and an easy back-focus adjustment helps efficient installation. Main Features: • 1/3” color CCD pickup device for more than 380/520 TV lines of horizontal re
Inhaltszusammenfassung zur Seite Nr. 6
Specifications Model 250 350HQ 550EX Pickup Device: 1/3” interline transfer color CCD Video Format: NTSC / PAL NTSC: 510(H) x 492(V) NTSC: 768(H) x 494(V) Picture Element: PAL: 500(H) x 580(V) PAL: 752(H) x 582(V) Horizontal 380TV lines 520TV lines Resolution: 1.0lux color, 0.15lux Sensitivity: 0.5lux/F=1.2 0.5lux/F=1.2 monochrome/F=1.2 Video Output: BNC VBS 1.0Vp-p, 75ohm S/N Ration: Over 48dB Electronic Up to 1/100,000 Shutter: Back Light ON/OFF switch
Inhaltszusammenfassung zur Seite Nr. 7
Major Parts Names and Their Functions 1 3 Front Side 7 Top 12(optional) Rear (EQ series) Rear(EQ series” A”) 6
Inhaltszusammenfassung zur Seite Nr. 8
1. Focal Length Adjustment Ring Use this ring to adjust the appropriate focal length according to the lens type. Rotate the ring clockwise for a CS-mount lens; rotate the ring counterclockwise for a C-mount lens. The factory setting is C-mount. 2. Lens Mount Used to mount an appropriate C-mount or CS-mount lens. 3. Locking Screw Use the locking screw to set the focal length. 4. Lens Connector (4 pin socket) Connect to the lens plug of the auto iris lens. 5. Control S
Inhaltszusammenfassung zur Seite Nr. 9
ES (Electronic Shutter) Off/On ES ON: The camera continuously adjusts the shutter speed from 1/60 (NTSC),1/50 (PAL) second to 1/100,000 second according to the luminance conditions of the scene. ES OFF: The shutter speed is fixed at 1/60 (NTSC), 1/50 (PAL) second. Place ES in the off position, when auto iris lens are used or flicker is observed under extremely bright fluorescent lighting. In all other lighting, keep ES in the on position for optimum performance. The default setting is
Inhaltszusammenfassung zur Seite Nr. 10
VD/DD (Auto Iris lens Type) For video drive auto iris lens, please set the switch to VD. For direct drive iris lens, set the switch to DD. The default setting is DD. Wire the lens cable to the lens connector according to the following table. Pin1 Pin2 Pin3 Pin4 Lens Connector Video Drive +12V GND VD-IRIS GND 2 1 Direct Drive Cnt-Cnt+ Drv+ Drv- 6. IRIS Level Control Brightness Level can be adjusted from the IRIS level VR while using the direct drive lens. • Turn count
Inhaltszusammenfassung zur Seite Nr. 11
9. Video Output Connector BNC VBS 1.0 Vp-p, 75ohm 1 Power Cable (EQ series) 2 DC12V/AC24V Screw Terminals (EQ series “A”) 3 Audio Output(optional):Connect with an audio device, RCA connector 10
Inhaltszusammenfassung zur Seite Nr. 12
Installation Instructions 1) Remove the cap cover from the top of the lens mount. 2) To attach a C-mount/CS-mount lens, turn the focal length adjustment ring to the appropriate position. Note: If a C-mount lens is used, please make sure the focal length adjustment ring is set at C position before fixing the lens. a) Screw the lens firmly onto the lens mount. Insert the lens plug in the lens connector if the auto iris lens is used. b) Tighten the locking screw. c) Connect the v
Inhaltszusammenfassung zur Seite Nr. 13
EverFocus Electronics Corporation Home Office: 12F, No.79 Sec. 1 Shin-Tai Wu Road, Hsi-Chih, Taipei, Taiwan TEL: +886-2- 26982334 FAX: +886-2-26982380 www.everfocus.com.tw USA Office: 2445 Huntington Drive, San Marino, CA 91108, U.S.A. TEL: +1-626-844-8888 FAX: +1-626-844-8838 www.everfocus.com European Office: Albert-Einstein-Strasse 1 D-46446 Emmerich, Germany TEL: 49-2822-9394-0 FAX: 49-2822939495 www.everfocus.de China Office: Room 609, Technology Trade Building, Shan
Inhaltszusammenfassung zur Seite Nr. 14
13
