Bedienungsanleitung Directed Electronics PowerClass Coaxial Speakers

Inhaltszusammenfassung zur Seite Nr. 1

®
PowerClass coaxial speakers

Inhaltszusammenfassung zur Seite Nr. 2

INTRODUCTION ® Thank you for your purchase of this PowerClass Coaxial Loudspeaker system from ™ PrecisionPower . Our engineers have combined state of the art materials such as foamed polypropylene cones and vapor-deposit titanium dome tweeters with cutting-edge industrial design to achieve competition-ready performance levels. TM PRACTICE SAFE SOUND Continuous exposure to sound pressure levels over 100dB may cause permanent hearing loss. High powered automotive sound systems can generate sound p

Inhaltszusammenfassung zur Seite Nr. 3

TOOLS OF THE TRADE Listed below are tools you may wish to have on hand before starting your installation. Having the proper tools will make the installation much easier. Some of these tools are necessities, some will just make the job easier.  Marking Pen Electr  ic Drill  1/4” Drill Bit  Phillips Screwdriver  1/8” Drill Bit  Volt/Ohm Meter (optional)  3/8” Drill Bit  Assorted Tin Snips  Hole Saw Arbor  Wire Cutters  4-3/4” Hole Saw (5-1/4” woofer install)  Wire Crimpers  5-3/4” Hol

Inhaltszusammenfassung zur Seite Nr. 4

INSTALLING THE SPEAKER Step 1: Determine where the speaker will be mounted. Make sure there is a flat area large enough for the speaker to fit properly. An uneven mounting surface can damage the driver and limit the bass performance of your PC component system. Step 2: Check to make sure the mounting location you have chosen for the speaker will not interfere with the operation of the vehicle. Step 3: Using the supplied template guide, mark the hole with a pen. Step 4: [Skip this step if using c

Inhaltszusammenfassung zur Seite Nr. 5

SPECIFICATIONS Model PC 525C PC 570C Nominal Impedance 4 ohms 4 ohms Power 50/100 watts 50/100 watts Continuous/Peak Frequency Response 100Hz - 30kHz 80Hz - 20kHz Sensitivity 90 dB 91 dB (2.83V @ 1w/1m) Mounting Depth 2-7/8” 2-7/8” Model PC 650C PC 690C Nominal Impedance 4 ohms 4 ohms Power 60/120 watts 75/150 watts Continuous/Peak Frequency Response 90Hz - 20kHz 70Hz - 20kHz Sensitivity 90 dB 91 dB (2.83V @ 1w/1m) Mounting Depth 2-15/16” 3-7/16” 4

Inhaltszusammenfassung zur Seite Nr. 6

Warranty LIMITED TWO YEAR CONSUMER WARRANTY: Directed Electronics, Inc. promises to the original purchaser, to replace this product should it prove to be defective in workmanship or material under normal use, for a period of two years from the date of purchase from the dealer as indicated by the date code marking of the product PROVIDED the product was installed by an authorized Directed dealer. During this two-year period, there will be no charge for this replacement PROVIDED the unit is return