Bedienungsanleitung American Power Conversion 8000VA

Bedienungsanleitung für das Gerät American Power Conversion 8000VA

Gerät: American Power Conversion 8000VA
Kategorie: Netzteil
Produzent: American Power Conversion
Größe: 0.47 MB
Datum des Hinzufügens: 11/10/2014
Seitenanzahl: 21
Anleitung drucken

Herunterladen

Wie kann man es nutzen?

Unser Ziel ist Ihnen einen schnellen Zugang zu Inhalten in Bedienungsanleitungen zum Gerät American Power Conversion 8000VA zu garantieren. Wenn Sie eine Online-Ansicht nutzten, können Sie den Inhaltsverzeichnis schnell durchschauen und direkt zu der Seite gelangen, auf der Sie die Lösung zu Ihrem Problem mit American Power Conversion 8000VA finden.

Für Ihre Bequemlichkeit

Wenn das direkte Durchschauen der Anleitung American Power Conversion 8000VA auf unserer Seite für Sie unbequem ist, können sie die folgende zwei Möglichkeiten nutzen:

  • Vollbildsuche – Um bequem die Anleitung durchzusuchen (ohne sie auf den Computer herunterzuladen) können Sie den Vollbildsuchmodus nutzen. Um das Durchschauen der Anleitung American Power Conversion 8000VA im Vollbildmodus zu starten, nutzen Sie die Schaltfläche Vollbild
  • Auf Computer herunterladen – Sie können die Anleitung American Power Conversion 8000VA auch auf Ihren Computer herunterladen und sie in Ihren Sammlungen aufbewahren. Wenn Sie jedoch keinen Platz auf Ihrem Gerät verschwenden möchten, können Sie sie immer auf ManualsBase herunterladen.
American Power Conversion 8000VA Handbuch - Online PDF
Advertisement
« Page 1 of 21 »
Advertisement
Druckversion

Viele Personen lesen lieber Dokumente nicht am Bildschirm, sondern in gedruckter Version. Eine Druckoption der Anleitung wurde ebenfalls durchdacht, und Sie können Sie nutzen, indem Sie den Link klicken, der sich oben befindet - Anleitung drucken. Sie müssen nicht die ganze American Power Conversion 8000VA Anleitung drucken, sondern nur die Seiten, die Sie brauchen. Schätzen Sie das Papier.

Zusammenfassungen

Unten finden Sie Trailer des Inhalts, der sich auf den nächsten Anleitungsseiten zu American Power Conversion 8000VA befindet. Wenn Sie den Seiteninhalt der nächsten Seiten schnell durchschauen möchten, können Sie sie nutzen.

Inhaltszusammenfassungen
Inhaltszusammenfassung zur Seite Nr. 1




User Manual
English
®

APC Smart-UPS RT
8000/10000 VA 200-240 VAC
Tower/Rack-Mount 6U
Uninterruptible Power Supply


990-2689C 04/2006

Inhaltszusammenfassung zur Seite Nr. 2

Inhaltszusammenfassung zur Seite Nr. 3

Introduction The APC Smart-UPS® RT is a high-performance, uninterruptible power supply (UPS) that provides protection for electronic equipment from utility power blackouts, brownouts, sags and surges. The UPS filters small utility line fluctuations and isolates electronic equipment from large disturbances by internally disconnecting from utility line power. The UPS provides continuous power from the internal battery until utility power returns to safe levels or the battery is fully discha

Inhaltszusammenfassung zur Seite Nr. 4

Hardwiring Wiring must be performed by a qualified electrician. 1. Install a utility circuit breaker in accordance with local electrical codes (see tables below) for input wiring. 2. Switch the UPS input circuit breaker (see A) and utility circuit breakers OFF. 3. Remove the access panel (see B). 4. Remove circular knockouts. 5. Run wires through access panel to terminal blocks. Wire to ground block first. Adhere to all national and local electrical codes. (See tables and graphics.) 6.

Inhaltszusammenfassung zur Seite Nr. 5

7. XLI model only: For three-phase input, set the Input Phase Selector switch (see C) to ‘3’. For single-phase input, leave switch in default position of ‘1’. XLT/XLJ/XLTW MODELS OUTPUT L1A L2A INPUT L1 L2 A B XLI MODEL OUTPUT L1A N1 INPUT L1 L2 A L3 N C B 8. Switch the circuit breakers ON. 9. Check line voltages. 10. Replace the access panel. 3

Inhaltszusammenfassung zur Seite Nr. 6

Installing and Connecting the Batteries and Attaching the Front Bezel 4

Inhaltszusammenfassung zur Seite Nr. 7

CONNECTING POWER AND EQUIPMENT TO THE UPS 1. Hardwire the UPS (see Hardwiring). 2. Connect equipment to the UPS (cables not included for XLT/XLJ/XLTW models). 3. Turn on all connected equipment. To use the UPS as a master on/off switch, be sure that all connected equipment is switched ON. 4. Press the button on the front panel to power up the UPS. • The battery charges to 90% capacity during the first three hours of normal operation. Do not expect full battery run capability during th

Inhaltszusammenfassung zur Seite Nr. 8

BASIC CONNECTORS Power management software and interface kits can be used with the UPS. Serial Port Use only interface kits supplied or approved by APC. Connect the UPS to the network. (Located on the Network Management Card.) Ethernet Port The optional Emergency Power Off (EPO) feature allows connected loads to be immediately de-energized from a remote location, without switching to battery operation (see EPO Option). EPO Terminal The UPS features a transient voltage surge-s

Inhaltszusammenfassung zur Seite Nr. 9

OPERATION FRONT DISPLAY PANEL Indicator Description The UPS is drawing utility power and performing double conversion to supply Online power to connected equipment (see Troubleshooting). The UPS is supplying battery power to the connected equipment. On Battery The UPS is in bypass mode, sending utility power directly to connected equipment. Bypass Bypass mode operation is the result of an internal UPS fault, an overload condition or a user initiated command eithe

Inhaltszusammenfassung zur Seite Nr. 10

Feature Function Manually switch connected equipment to bypass mode, so that utility power is Normal /Bypass sent directly to connected equipment. Battery operation is not available while the UPS is in bypass mode. (See Troubleshooting.) This is not a normal condition. Cold Start Supply immediate battery power to the UPS and connected equipment (see Troubleshooting). Press and hold the button to power up the UPS and connected equipment. The UPS will emit two beeps. During the secon

Inhaltszusammenfassung zur Seite Nr. 11

USER CONFIGURABLE ITEMS NOTE: SETTINGS ARE MADE THROUGH SUPPLIED POWERCHUTE SOFTWARE, NETWORK MANAGEMENT CARD, OPTIONAL SMART SLOT ACCESSORY CARDS OR TERMINAL MODE. FACTORY USER SELECTABLE FUNCTION DESCRIPTION DEFAULT CHOICES Automatic Self-Test Every 14 days Every 7 days Set the interval at which the (336 hours) (168 hours), UPS will execute a self-test. Every 14 days (336 hours), On Startup Only, No Self-Test UPS ID UPS_IDEN Up to eight characters to Uniquely identify the UP

Inhaltszusammenfassung zur Seite Nr. 12

NOTE: SETTINGS ARE MADE THROUGH SUPPLIED POWERCHUTE SOFTWARE, NETWORK MANAGEMENT CARD, OPTIONAL SMART SLOT ACCESSORY CARDS OR TERMINAL MODE. FACTORY USER SELECTABLE FUNCTION DESCRIPTION DEFAULT CHOICES High Bypass Point +10% of +5%, +10%, +15%, Maximum voltage that the UPS output voltage +20% will pass to connected setting equipment during internal bypass operation. Low Bypass Point -30% of output -15%, -20%, -25%, -30% Minimum voltage that the UPS voltage setting will pass to conn

Inhaltszusammenfassung zur Seite Nr. 13

EPO (Emergency Power Off) Option The output power can be disabled in an emergency by closing a switch connected to the EPO. Adhere to national and local electrical codes when wiring. The switch should be connected in a normally open switch contact. External voltage is not required; the switch is driven by 12V internal supply. In closed condition, 2mA of current are drawn. The EPO switch is internally powered by the UPS for use with non-powered switch circuit breakers. The EPO circuit i

Inhaltszusammenfassung zur Seite Nr. 14

Terminal Mode to Configure UPS Parameters Terminal Mode is a menu driven interface that enables enhanced configuration of the UPS. Connect the serial cable to the serial port on the back of the UPS. 1. Open a terminal program. Example: HyperTerminal • From the Desktop, go to Start => Programs => Accessories => Communication =>HyperTerminal. 2. Double-click on the HyperTerminal icon. • Follow the prompts to choose a name and select an icon. Disregard the message, “...must install a mode

Inhaltszusammenfassung zur Seite Nr. 15

MAINTENANCE, SERVICE, WARRANTY, AND TRANSPORTING Replacing the Battery Module(s) This UPS has easy to replace, hot-swappable battery modules. Replacement is a safe procedure, isolated from electrical hazards. You may leave the UPS and connected equipment on during the procedure. See your dealer or contact APC at the Web site, www.apc.com for information on replacement battery modules. The battery replacement procedure must include replacing all battery modules in the UPS and connected e

Inhaltszusammenfassung zur Seite Nr. 16

TROUBLESHOOTING Use the table below to solve minor installation and operation problems. Refer to the APC Web site, www.apc.com for assistance with complex UPS problems. PROBLEM AND POSSIBLE SOLUTION CAUSE UPS WILL NOT TURN ON Batteries are not connected Check that the battery connectors are fully engaged. properly. button not pushed. Press the button once to power the UPS and the connected equipment. UPS not connected to utility Check that the power cable from the UPS to the utilit

Inhaltszusammenfassung zur Seite Nr. 17

PROBLEM AND POSSIBLE SOLUTION CAUSE BYPASS LED ILLUMINATES The bypass switch has been If bypass is the chosen mode of operation, ignore the illuminated LED. turned on manually or through If bypass is not the chosen mode of operation move the bypass switch on the an accessory. back of the UPS, to the normal position. FAULT AND OVERLOAD LEDS ILLUMINATE; UPS EMITS A SUSTAINED ALARM TONE The UPS has ceased sending The connected equipment exceeds the specified “maximum load” as defined in

Inhaltszusammenfassung zur Seite Nr. 18

Service If the UPS requires service do not return it to the dealer. Follow these steps: 1. Review the problems discussed in the Troubleshooting section of this manual to eliminate common problems. 2. If the problem persists, contact APC Customer Support through the APC Web site, www.apc.com. Note the model number of the UPS, the serial number located on the back of the unit, and the date purchased. If you call APC Customer Support, a technician will ask you to describe the problem and

Inhaltszusammenfassung zur Seite Nr. 19

REGULATORY INFORMATION Regulatory Agency Approvals and Radio Frequency Warnings 200, 208, 220, 230, 240 V MODELS This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

Inhaltszusammenfassung zur Seite Nr. 20

Declaration of Conformity 18


Ähnliche Anleitungen
# Bedienungsanleitung Kategorie Herunterladen
1 American Power Conversion 100 Handbuch Netzteil 0
2 American Power Conversion 120 Handbuch Netzteil 0
3 American Power Conversion 110, 120, 230 Handbuch Netzteil 0
4 American Power Conversion 10000 VA Handbuch Netzteil 1
5 American Power Conversion 1000, 1100, 1400 Handbuch Netzteil 2
6 American Power Conversion 110Vac Handbuch Netzteil 0
7 American Power Conversion 1400XLT Handbuch Netzteil 0
8 American Power Conversion 1050 Handbuch Netzteil 0
9 American Power Conversion 10-40kW 208/480V Handbuch Netzteil 0
10 American Power Conversion 2200 VA Handbuch Netzteil 0
11 American Power Conversion 2200XLT Handbuch Netzteil 0
12 American Power Conversion 208/220 Handbuch Netzteil 0
13 American Power Conversion 20000 VA Handbuch Netzteil 3
14 American Power Conversion 2200VA 3U Handbuch Netzteil 0
15 American Power Conversion 230 VAC Handbuch Netzteil 0
16 Sony AC U50A Handbuch Netzteil 5
17 Sony AC LS1 Handbuch Netzteil 2
18 Sony NP-FM30 Handbuch Netzteil 35
19 Sony NP FX101 Handbuch Netzteil 1
20 Sony NH-AAA-DA Handbuch Netzteil 2