Inhaltszusammenfassung zur Seite Nr. 1
’
MODEL
CBM-230/231
Japan CBM Corporation
Information
Systems Div.
LINE THERMAL PRINTER
s Manual User
Inhaltszusammenfassung zur Seite Nr. 2
’ s Manual 1996.08.02(10-DCL)15 r r 169, Japan (S.NO.95Y0001 - ) : EN60950 : EN55022 : EN61000-3-2 : EN50082-1 "The 93/68/EEC Position : 3-2132 NG e CITIZEN 2 This declaration is applied only for 230V model. case the user may be required to take adequate measures. in which stic environment this product
Inhaltszusammenfassung zur Seite Nr. 3
’ s Manual l l l l l l l ’ l l l l ’ “ ” l D. If the product dose not operate normally when the operating instructions are followed. Adjust only those controls that are covered by the operating instructions since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to E. CITIZEN 3 If the product exhibits a distinct change in performance, indicating a need for service. F. If the product has been dropped t
Inhaltszusammenfassung zur Seite Nr. 4
’ s Manual IMPORTANT: This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to CITIZEN 4 radio interface regulations of the Canadian department of communications. This digital apparatus does not exceed the class A limits for radio noise emissions from digital, apparatus, as set out in the For Uses in Canada CAUTION: Use shielded ca
Inhaltszusammenfassung zur Seite Nr. 5
’ s Manual ................................ ................................ ................................ ................................ .............. 6 ................................ ................................ ................................ ................................ ....................... 6 ................................ ................................ ................................ ........................... 6 ................................ ....................
Inhaltszusammenfassung zur Seite Nr. 6
’ s Manual 1 GENERAL DESCRIPTION POS With Read 1.1 1. 2. 3. 4. 5. s 6. Drawer 7. 8. 9. 1.2 1. a the Printer Sample Instruction 2. 3. 4. 5. 6. 7. CITIZEN 6 printing head kept up. When transporting or not using the printer for a long period of time, leave the Connect only a specified solenoid to the drawer kick connector. Prepare a separate AC power supply
Inhaltszusammenfassung zur Seite Nr. 7
’ s Manual 2 BASIC SPECIFICATIONS 2.1 The -- R F 120 AC Model 120 CBM-230 230 CBM-231 : Character F
Inhaltszusammenfassung zur Seite Nr. 8
’ s Manual 2.2 Printing Line Print 72 Dot Printing 62.5 (500-dot No. 48 ) *(42 64 *(56 Character size 1.25 0.88 Character Bar UPC-A/E, JAN(EAN) 13 CODE Line 1/6 Min. Paper Thermal (Refer Interface Serial Input 72 120 10 %, 60 Hz Power ± 230 10 %, 50 / 60 Hz ± 100W Weight External 145 (W) x 216 (D) x 150 (H) Operating 5 - 40 °C Storage - 20 - 60 °C Reliability Print ’ 50 30 Km Auto ’ (Normal CITIZEN 8 * Special ROM only normal humidity, recommended
Inhaltszusammenfassung zur Seite Nr. 9
’ s Manual 2.3 2.3.1 Specified Paper Type Paper Paper ± 5 m : Ø83 Print Recommended Core : Ø12 [Caution] 2.3.2 Printing Position 2.3.3 Head and Cutter Positional Relations CITIZEN 9 Do not paste the paper to the core. (outer diameter) mm (inner diameter), Ø18 mm or other equivalent Nihon Paper Mill. paper : TF50KS-E2C made by : Outside of the roll(surface) surface or less mm Roll diameter Micro : 65 thick
Inhaltszusammenfassung zur Seite Nr. 10
’ s Manual 3 APPEARANCE AND COMPONENT PARTS CITIZEN 10 CBM-230/231 User
Inhaltszusammenfassung zur Seite Nr. 11
’ s Manual 4 OPERATION 1. 2. 3. Serial Parallel 4. CITIZEN 11 Connect the cable to the computer. : Turn a fixture in an arrow direction to fix. interface : Tighten screws to fix. interface Fix the cable terminal. interface connector. Confirm the vertical direction of a cable terminal and connect it to the Turn off the power. 4.1 Connecting the Interface Cable CBM-230/231 User
Inhaltszusammenfassung zur Seite Nr. 12
’ s Manual 4.2 1. 2. it 3. [Caution] CITIZEN 12 Connect only a specified drawer(solenoid) to the drawer kick connector. printer. earthing conductor to the earth terminal of the Using a screw, fix a drawer's into the drawer kick connector on the back of the printer. Confirm the vertical direction of a drawer kick cable connector and insert Turn off the power. Connecting the Drawer Kick Connector CBM-230/231 User
Inhaltszusammenfassung zur Seite Nr. 13
’ s Manual 4.3 [Caution] 1. 2. [Caution] (CBM-231) CBM-231 CITIZEN 13 When setting the paper roll, you do not have to open the auto cutter. Shift the head-up lever in an arrow direction to move up the printing head. Open the printer cover. Be sure to use a specified paper roll. Inserting the Paper Roll CBM-230/231 User
Inhaltszusammenfassung zur Seite Nr. 14
’ s Manual 3. 4. [Caution] CITIZEN 14 paper. Make sure that the paper roll rotates smoothly without tilting the set the paper and hold the core center properly. Confirm the winding direction of the paper roll. Opening the paper holder in the direction of the arrow, [Caution] Do not insert the paper with its end fluffed or bent. Using the scissors, cut the end of the paper at a right angle. CBM-230/231 User
Inhaltszusammenfassung zur Seite Nr. 15
’ s Manual 5. 6. CITIZEN 15 When the paper is tilting, correct it and move the printing head down. position. [Caution] Do not turn the paper feed knob when the printing head is in its down (The figure below shows the CBM-231). auto cutter or nose of the manual cutter. to feed out the paper about 5 cm from the paper outlet of the direction of the arrow Insert the end of the paper into the paper inlet, turn the paper feed knob in the CBM-230/231 User
Inhaltszusammenfassung zur Seite Nr. 16
’ s Manual 7. blade 8. You 9. straight 10. (1) (2) (3) (4) CITIZEN 16 [Caution] When the paper is tilting, move up the printing head and correct it manually. Close the printer cover to finish setting of the paper roll. constant amount. head. The paper is automatically pulled in by a move down the printing Insert the end of the paper straight into the paper inlet of the printer and Move the p
Inhaltszusammenfassung zur Seite Nr. 17
’ s Manual 4.4 1. Illuminated 2. Indicates Printer Close Head Head temperature Press Cutter Eliminate and Near Near [Caut i Holding CITIZEN 17 the cover is opened. [Caution] Depending on a selection of the DIP switch, the paper can be fed when the LF switch executes it. In case of macro execution wait, pressing down feeds the paper continuously. Pressing this switch for a short time feeds the paper by one line. it 4 LF switch on] Use the
Inhaltszusammenfassung zur Seite Nr. 18
’ s Manual Self-printing e CITIZEN 18 Never touch the printing head and motor when you open the auto cutter. [Caution] Immediately after printing, the printing head and motor have a high temperature. pulling the cutter lock lever in the direction of the arrow. head, raise the auto cutter, auto cutter in order to clean the When the paper is jamming or when you open th 4.5 Opening the Auto Cutter(CBM-231) held down. is performed by turning on the power switch wi
Inhaltszusammenfassung zur Seite Nr. 19
’ s Manual 5 SETTING OF DIP SWITCHES CITIZEN 19 [Caution] Turn off the power to set the DIP switch. remove the DIP switch cover. The DIP switches are located in the position shown in the figure below. Unscrew and CBM-230/231 User
Inhaltszusammenfassung zur Seite Nr. 20
’ s Manual ON -1 * -2 -3 -4 -5 -6 -7 -8 ON -1 ON -2 -3 t OFF -4 -5 -6 -7 OFF -8 ON -1 -2 -3 -4 XON-XOFF ON -1 -2 ON -3 ON -4 DS1-6 ON ON 7 ON ON Dark DS-1 ON ON -2 ON ON CITIZEN 20 OFF OFF OFF OFF darker Standard Light Print density OFF OFF OFF OFF 2 m 1 m 50 cm 0 cm Remaining printable Length The DIP switches DS3 and DS4 are only for the serial interface. The Switch segment marked * are set depending on each models. OFF Unused Baud
