Inhaltszusammenfassung zur Seite Nr. 1
BP68-00132A-cover 2/20/03 9:10 AM Page 2
DLPTV DLPTV
INSTRUCTION MANUAL
BP68-00132A-00(ENG)
ST43L2HD/ST50L2HD/ST61L2HD
Inhaltszusammenfassung zur Seite Nr. 2
BP68-00132A-1 2/20/03 9:09 AM Page 2 Safety Instructions Thank You for Choosing Samsung Warning! Important Safety Instructions Thank you for choosing Samsung! Your new Samsung projection TV represents the latest in television tech- nology. We designed it with easy-to-use on-screen menus and closed captioning capabilities, making it CAUTION one of the best products in its class. We are proud to offer you a product that will provide convenient, dependable service and enjoyment for years to c
Inhaltszusammenfassung zur Seite Nr. 3
BP68-00132A-1 2/20/03 9:09 AM Page 4 Safety Instructions • Protect the power cord. Power supply cords should be routed so that they won’t be walked on or FCC Information pinched by objects placed on or against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the unit. • Unplug the TV from the wall outlet and disconnect the antenna or cable system during a lightning storm User Instructions Warning or when left unattended and unused f
Inhaltszusammenfassung zur Seite Nr. 4
BP68-00132A-1 2/20/03 9:09 AM Page 6 Table of Contents Your New Wide TV ..........................................................................................10 Special Features ...............................................................................................48 Replacing the Lamp .............................................................................................10 Setting Up Your Remote Control........................................................................
Inhaltszusammenfassung zur Seite Nr. 5
BP68-00132A-1 2/20/03 9:09 AM Page 8 Your New Wide TV SAMSUNG
Inhaltszusammenfassung zur Seite Nr. 6
BP68-00132A-1 2/20/03 9:09 AM Page 10 Your New Wide TV Replacing the Lamp Use a screwdriver to remove the screw as 1 shown in the picture. • A Projection TV lamp is a consumable item, and should be replaced from time to time for best projec- tor operation. If the screen image becomes dark, or timer, lamp and Temp LEDs flicker off at the same time, you may have to replace the lamp. • When changing the lamp, you should first verify the type/model, and then use only the correct lamp replacemen
Inhaltszusammenfassung zur Seite Nr. 7
BP68-00132A-1 2/20/03 9:09 AM Page 12 Your New Wide TV List of Features Side Panel Buttons The buttons on the side panel control your TV’s basic features, including the on-screen menu system. To use the more advanced features, you must use the remote control. Your TV was designed and engineered using the latest technology. It is a full-featured, high-performance unit that exceeds industry standards. In addition, it has these special features: Œ TV/VIDEO œST43L2HD • Easy-to-operate remote co
Inhaltszusammenfassung zur Seite Nr. 8
BP68-00132A-1 2/20/03 9:09 AM Page 14 Your New Wide TV Front Panel LED Indicators Rear Panel Jacks The three lights on the front panel indicate the status of your TV. Use the rear panel jacks to connect components such as a VCR. You can connect two different components such as two VCRs, Set-Top Box and a DVD player etc., because there are two sets of video input jacks and one set of component video input jacks on the rear panel of your TV. For more information, please see “Connections”.
Inhaltszusammenfassung zur Seite Nr. 9
BP68-00132A-1 2/20/03 9:09 AM Page 16 Your New Wide TV Remote Control Installing Batteries in the Remote Control With normal use, the batteries in the remote control should last about a year. If you notice a performance You can use the remote control up to a distance of about 23 feet from the TV. When using the remote, degradation while using the remote, the batteries may need to be replaced. Make sure you replace both always point it directly at the TV. The remote control can also operate y
Inhaltszusammenfassung zur Seite Nr. 10
BP68-00132A-2 2/20/03 9:10 AM Page 18 Connections SAMSUNG
Inhaltszusammenfassung zur Seite Nr. 11
BP68-00132A-2 2/20/03 9:10 AM Page 20 Connections Separate VHF and UHF Antennas Connecting VHF and UHF Antennas If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting them to the TV. This requires a combiner attachment, which If you do not have a cable system, you will need to connect an antenna to your TV. you can buy at an electronics store. Antennas with 300-ohm Flat Twin Leads If your antenna looks like this:
Inhaltszusammenfassung zur Seite Nr. 12
BP68-00132A-2 2/20/03 9:10 AM Page 22 Connections Connecting a Cable Converter Box Connecting Cable TV and VCR This connection allows you to watch cable and premium channels. You should keep your TV You can connect different cable systems to your TV, including cable without a cable box, and selected to ANT-A so that you can use the TV features. When viewing premium channels, select cable with a cable box that descrambles some or all channels. ANT-B and tune the TV to channel 3 or 4 (whichever
Inhaltszusammenfassung zur Seite Nr. 13
BP68-00132A-2 2/20/03 9:10 AM Page 24 Connections Connecting a Camcorder Connecting a DVD Player The side panel jacks on your TV make it easy to connect a camcorder to your TV. The rear panel jacks on your TV make it easy to connect a DVD player to your TV. You can use your camcorder to view tapes without using a VCR. Connecting to Y,Pb,Pr Connect a set of audio Locate the A/V output jacks cables between the 1 on the camcorder. They are 1 Component1AUDIO IN usually found on the side or jacks
Inhaltszusammenfassung zur Seite Nr. 14
BP68-00132A-2 2/20/03 9:10 AM Page 26 Connections Connecting a DTV Set Top Box Connecting to Y,Pb,Pr Connecting to R,G,B TV Rear Panel TV Rear Panel Connect a set of audio Component1 Component1/2 PC AUDIO Connect a set of audio (480i/480p) (480p/720p/10801i) Component1 Component1/2 (480i/480p) (480p/720p/10801i) PC AUDIO DVI DVI cables between the Y cables between the PC PC Y 1 ANT-A 1 PC ANT-A Pb Component2 or RS-232C AUDIO IN jacks on the TV Pb RS-232C MONITOR ANT A-OUT OUT Pr MONITOR ANT A
Inhaltszusammenfassung zur Seite Nr. 15
BP68-00132A-3 2/20/03 9:11 AM Page 28 Operation SAMSUNG
Inhaltszusammenfassung zur Seite Nr. 16
BP68-00132A-3 2/20/03 9:11 AM Page 30 Operation Turning the TV On and Off Selecting the Menu Language Press the Power button on the remote control or on the side panel to turn your TV on and off. Choose a language for the on-screen menus: English, Spanish or French. Press the Menu button. Viewing the Menus and Displays Move the joystick down to 1 select SETUP, then press the The on-screen menu system allows you to control the settings of your TV. Access the on-screen menu joystick to enter.
Inhaltszusammenfassung zur Seite Nr. 17
BP68-00132A-3 2/20/03 9:11 AM Page 32 Operation Storing Channels in Memory Automatically Channel Memory First, select the broadcast source as Your TV can memorize and store all of the channels available. Once the channels are memorized, described on the previous page. With 1 you can use the CH and CH buttons to scan through the available channels. the Channel Setup menu on screen, move the joystick down to select “Auto Channel Memory.” Selecting the Broadcast Source Before memorizing availab
Inhaltszusammenfassung zur Seite Nr. 18
BP68-00132A-3 2/20/03 9:11 AM Page 34 Operation Changing Channels Selecting Your Favorite Channels You can change channels on your TV by using the CH and CH buttons, or by direct selec- You can store up to ten of your favorite channels for each available input source (such as TV and tion using the number buttons. You can use the number buttons to tune to any channel (even one CATV). Then, when you press the Fav.CH button on the remote control, the TV displays only the that has been erased or
Inhaltszusammenfassung zur Seite Nr. 19
BP68-00132A-3 2/20/03 9:11 AM Page 36 Operation Labeling the Channels Setting The On/Off Melody Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”, You can hear clear melody sound when the TV is powered On or Off. “PBS2”, CNN1”, etc.) A label consists of four fields, where each field is a letter, a number, or a blank. When the DISPLAY button is pressed, the channel label will appear next to the channel number. Press the Menu button. Move the joystick down
Inhaltszusammenfassung zur Seite Nr. 20
BP68-00132A-3 2/20/03 9:11 AM Page 38 Operation Using Automatic (“Standard”) Picture Settings Picture Control Press the P.Mode button on the remote control to change the picture settings. Using the remote, you can change the contrast, brightness, tint, color, and sharpness settings of 1 the TV. Customizing the Picture Press the Menu button. Press the joystick to enter. 1 Press P.Mode repeatedly to select the “Dynamic”, “Standard”, “Movie” or 2 “Custom” picture setting. Move the joystick d
