Inhaltszusammenfassung zur Seite Nr. 1
Electric Ceramic Hob
ZKF641H
Operating and Installation Instructions
Inhaltszusammenfassung zur Seite Nr. 2
User Instructions Installation Instructions Important hints on safety 3 Technical Details 12 Unpacking and Disposal 12 Description of the appliance 4 Installing in the kitchen worktop 12 Before first use 4 Building-In 13 Operating Instructions 5 Electrical Connection 14 Ceramic glass surface 5 Heat Controls & Settings 5 Residual heat indicator 6 Pots and pans 6 Energy Saving tips 6 Maintenance and Cleaning 7 Something Not Working 8 Cust
Inhaltszusammenfassung zur Seite Nr. 3
This safety information is provided in the interests of your safety. Please read it carefully before installing or using the hob. If you are unsure if the meaning of any of the warnings please contact our Customer Care Department. Installation • The cooking zones heat up quickly when they • This appliance must be installed by a qualified electrician / competent person, according to the are turned on. Only turn them on when a manufacturer’s instructions and to the relevant saucepan i
Inhaltszusammenfassung zur Seite Nr. 4
1. Cooking Zone ø 180 mm 1800 W 2. Cooking Zone ø 180 mm 1800 W 3. Cooking Zone ø 145 mm 1200 W 4. Cooking Zone ø 145 mm 1200 W 5. Residual Heat Indicator 6. Heat setting control knobs Voltage AC 230 V Total connected Load 6.0 kW Please check that the appliance was delivered in perfect condition. Appliances with obvious transport damage must not be connected to the mains. First Cleaning In order to remove any remnants left
Inhaltszusammenfassung zur Seite Nr. 5
Ceramic glass surface The cooking surface is made of proven ceramic glass. The surface is non-porous and, in addition, insensitive to quick variations in temperature. Therefore pots may be moved from a hot to a cold zone. When switching on the cooking zones you may hear a short-term audible buzzing sound of the radiant elements. This will not harm the performance of the appliance. Keep all objects and materials that might smelt away from the heat zones. Sugar solutions,
Inhaltszusammenfassung zur Seite Nr. 6
Residual Heat indicator Each cooking zone is related to one indicator. The warning lamp illuminates when the surface of the corresponding cooking zone reaches a temperature which could cause burns. The indicator remains illuminated after the area heated has been switched off as long as the residual heat of the corresponding cooking zone could cause burns. The light will go out when the temperature falls below 60°C. Saucepans and frying pans. Saucepans a
Inhaltszusammenfassung zur Seite Nr. 7
Before cleaning, make sure that the hob is cool and disconnected from the power supply. Never use aggressive or abrasive agents, such as oven sprays, stain or rust removers, scouring powder, or sponges with an abrasive effect. Special cleaning agents such as Vitroclen and ceramic glass scrapers are available from department stores and electrical specialists. Cleaning after each use • Slight, non-burnt soiling can be wiped off with a damp cloth. • Burn
Inhaltszusammenfassung zur Seite Nr. 8
If your hob is not functioning correctly please carry out the following checks before calling out an engineer. Important: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee. Symptom Possible Solution • The cooking zones do not function. • Check the mains has not failed. • Check a power level has been selected. • After switching off a cooking zone the
Inhaltszusammenfassung zur Seite Nr. 9
We Zanussi undertake that if within 24 months of the date of the purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, the company will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: The appliance has been correctly installed and used only on the electrical supply stated on the rating plate. The appliance has been used for normal domestic purposes
Inhaltszusammenfassung zur Seite Nr. 10
To contact your local Service Force Centre telephone 08705 929 929 ISLE OF LEWIS ND Macleod CHANNEL ISLANDS 16 James Street Stornoway NORTH EAST GUERNSEY Guernsey Electricity Isle of Lewis PA87 2QW PO Box 4 Vale, Guernsey GATESHEAD Unit 356a Channel Islands GY1 3AD Dukesway Court KELSO 2, 6 & 8 Woodmarket Dukesway Kelso JERSEY Jersey Electricity Company Gateshead NE11 0BH Borders Haut De L’orme TD5 7AX Rue De Haut De L’
Inhaltszusammenfassung zur Seite Nr. 11
To contact your local Service Force Centre telephone 08705 929 929 MIDLANDS LONDON & EAST ANGLIA SOUTH EAST BIRMINGHAM 66 Birch Road East BECKENHAM 11a Gardner Ind. Estate ASHFORD Unit 2 Wyrley Trading Estate Kent House Lane Bridge Road Business Witton Beckenham Centre Birmingham Kent BR3 1QZ Bridge Road B6 7DB Ashford CHELMSFORD Hanbury Road Kent TN23 1BB BOURNE Pinfold Road Widford Ind. Estate Bourne Chelmsford FLEET Unit 1 PE10 9HT Ess
Inhaltszusammenfassung zur Seite Nr. 12
Please examine the appliance for any damage. If Measurement of: the appliance is damaged contact your retailer Worktop Opening Appliance: before the appliance is connected. Width: 560mm Width: 572mm Depth: 490mm Depth: 502mm Please keep packaging away from children and Corner Radius:5mm Height: 49mm dispose of with due regard for the environment. Voltage: AC 230 V 50 Hz/60Hz Important Safety Requirements Total Connection Load: 6.0kW • The hob must be in
Inhaltszusammenfassung zur Seite Nr. 13
When building in ceramic glass cooking areas the of need for service, and may damage the worktop if front cross-rail of the build-in cupboard must be removing the hob. removed in order to have the heat radiating off 5 holes in the bottom of the build-in case are escape without any obstacles. provided for the screws of the fitting plates. The space under the hob unit must be closed at all At first screw on the fitting plates by a screwdriver sides in a way that the lower side of the cooki
Inhaltszusammenfassung zur Seite Nr. 14
Electrical Connection The mains connection must be carried out by an expert electrician. The VDE-regulations and the valid prescriptions by the local power supply boards have to be compiled with. Prior to connection it should be checked whether the voltage stated on the type plate - i.e. the nominal voltage of the appliance and of the oven/control box – is identical with the prevailing mains voltage. The rating plate is located on the hobs bottom. The heating element voltage amo
Inhaltszusammenfassung zur Seite Nr. 15
14
Inhaltszusammenfassung zur Seite Nr. 16
© Electrolux Household Appliances Limited 2001
