Bedienungsanleitung Altec Lansing XA3001

Inhaltszusammenfassung zur Seite Nr. 1

MODEL
User's guide
XA3001

Inhaltszusammenfassung zur Seite Nr. 2

The lightning flash with arrowhead, within an Caution: To prevent the risk of electric shock, do not The exclamation point within an equilateral triangle is equilateral triangle, is intended to alert the user to the remove cover (or back). No user- serviceable parts intended to alert the user to the presence of important presence of uninsulated “dangerous voltage” within the inside. Refer servicing to qualified service personnel. operating and maintenance (servicing) instructions in product’s en

Inhaltszusammenfassung zur Seite Nr. 3

2. Plug the remaining set of red and white RCA connectors on the System Specifications Video Gaming & TV supplied cable in the red (right) and white (left) inputs on your XA3001 Audio Subwoofer XA3001 subwoofer. Total System Power: 30 Watts (15 Watts RMS) POWER REQUIREMENTS WELCOME Frequency Response: 35 Hz - 150 Hz USA/Canada/and applicable 120 V AC @ 60 Hz Alternative Connection Method Signal to Noise Ratio @ 1 kHz input: >77 dB Latin American countries: Welcome to the extraordinary world of A

Inhaltszusammenfassung zur Seite Nr. 4

TROUBLESHOOTING TIPS SYMPTOM POSSIBLE PROBLEM SOLUTION No sound from Power is not turned on. Verify that the subwoofer’s AC power cord is plugged into both the subwoofer or TV subwoofer and wall outlet. speakers. Verify that the Power button has been pressed and that the power LED is illuminated. Bass level is set too low. Turn the bass level rotary knob to the right to raise the subwoofer volume. Check volume level on the audio source device, and set at mid-level. Audio cable isn’t connected to

Inhaltszusammenfassung zur Seite Nr. 5

Corporate Headquarters Asia/Pacific Rte. 6 & 209, Milford, PA 18337-0277, USA 25 Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong A7900 REV01 800-ALTEC-88 • 570-296-4434 • Fax 570-296-6887 (852) 2735-7331 • Fax (852) 2317-7937