Inhaltszusammenfassung zur Seite Nr. 1
LIMITED WARRANTY
This DCM loudspeaker is intended for the reproduction of music in
residential premises only and is warranted against defective materials
or workmanship for a period of one year from the original date of
purchase. This warranty extends to the original purchaser from an
authorized DCM retailer only.
Defective parts will be repaired, adjusted or replaced with no charge for
materials or labor if the purchaser returns the loudspeaker together
with the original sales receipt or other
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
SPECIFICATIONS SAFETY SYMBOLS AND STATEMENTS Amplifier Type: Class A/B Frequency response: 40 Hz - 160 Hz Lo-pass xover 60 Hz - 160 Hz at 18 dB per octave Inputs: Line level and speaker level full range Outputs: Line level Hi-pass subsonic filter: 18 dB per octave below 30 Hz Polarity switch: Normal (0 degrees)/reverse (180 degrees) Amplifier Power: (continuous) 100 watts Driver Size: 10” Voice coil diameter: 1-1/2” Dimensions Height: 15-1/2” Width: 15” Depth: 17” Weight System: 34.5 lbs Shippi
Inhaltszusammenfassung zur Seite Nr. 4
IMPORTANT SAFETY INSTRUCTIONS IN CASE OF TROUBLE 1. Read Instructions – All the safety and operating should be routed so that they are not likely to be Your new subwoofer, once set-up and adjusted, should give you years of listening instructions should be read before the product is walked on or pinched by items placed upon or against opened. them, paying particular attention to cords at plugs, enjoyment with your favorite movies and music. However, if you should convenience receptacles, and the
Inhaltszusammenfassung zur Seite Nr. 5
OPERATION After you have connected your subwoofer, adjusted it for proper operation with the rest of your system, and experimented to find the best location for it, it’s time to sit back and enjoy it. As you do, here are some hints for getting the most out of your subwoofer. A) The subwoofer’s level control is designed to adjust the balance between your POWERED HOME SUBWOOFER subwoofer and main stereo speakers and should not be used as a substitute for OWNER’S MANUAL the bass or loudness contro
Inhaltszusammenfassung zur Seite Nr. 6
CONGRATULATIONS... SET-UP AND ADJUSTMENT ... on your purchase of a DCM powered home subwoofer system. Your new After you have selected an initial location for your subwoofer and have connected subwoofer is one of the most exciting home entertainment electronic products it into your system, have a seat in your normal listening position and have available, adding impact and realism to recorded music and the wide variety of someone help you with the following adjustments: movies to be found on vid
Inhaltszusammenfassung zur Seite Nr. 7
B) For use with A/V preamps and receivers that have 5.1 channel line level UNPACKING/PRE-INSTALLATION INSTRUCTIONS ouputs. If your preamplifier or receiver has a single “subwoofer” output or “LFE” output, Unpack your new subwoofer carefully, keeping the carton and packing material for connect a shielded cable from the preamplifier output to either one of the future use. Also, write the serial number in your home records for later reference. subwoofer line level inputs. Refer to Figure E. Check
Inhaltszusammenfassung zur Seite Nr. 8
Installation using line level inputs EXPLANATION OF FEATURES AND CONTROLS A) Using a preamp or receiver with line level outputs. Refer to figure A. If a preamplifier output is available on your receiver, or you have a preamplifier, 1) Polarity switch: This two position switch allows the best match of acoustic connect it to the stereo line level RCA type input jacks on your subwoofer. Use output between the subwoofer and the main stereo speakers in the region of the quality shielded cables and
Inhaltszusammenfassung zur Seite Nr. 9
B) For amplifiers with two sets of speaker connections. An alternate method of connecting your subwoofer and main speakers is possible if you have a receiver or amplifier that can accommodate two sets of speakers that can be switched on at the same time and be connected in parallel. (Note that some receivers and amplifiers connect "A" and "B" sets of speakers in series, not parallel. A series wiring will not allow this alternate connection method for your 3 9 subwoofer. Consult the owner's manua
Inhaltszusammenfassung zur Seite Nr. 10
WIRING AND CONNECTIONS PLACEMENT OR POSITIONING Turn off all power to your subwoofer and other equipment before making Your new subwoofer will work well in a variety of locations. However, placement in any connections. your listening room will affect its performance. Since the wavelengths of sound reproduced by your subwoofer are large compared to its size, those sounds are Installation using speaker level inputs omni-directional in nature. This means that locating your subwoofer in relation t
